1. Terms and Conditions.pdf

Attachment 1. Terms and Conditions

DFARS Clauses Incorporated by Reference

Number Title

Effective Date

Alternate/ Deviation

Variation

Date

252.201-7000 Contracting Officer's Representative. Dec 1991 252.231-7000 Supplemental Cost Principles Dec 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2in1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

http://www.sam.gov/

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

F87700

Issue By DoDAAC

FA5004

Admin DoDAAC

Inspect By DoDAAC

F1U3C1

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

_ryan.baudouin@us.af.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause) mailto:_ryan.baudouin@us.af.mil

Special Contract Requirements

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective

Alternate/ Deviation

52.203-3 Gratuities. Apr 1984 52.204-13 System for Award Management Maintenance. Oct 2018

52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020

52.204-21 Basic Safeguarding of Covered Contractor Information Systems. Nov 2021

52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023

52.222-1 Notice to the Government of Labor Disputes. Feb 1997

52.222-9 Apprentices and Trainees. Jul 2005

52.223-5 Pollution Prevention and Right-to-Know Information. May 2024

52.223-10 Waste Reduction Program. May 2024

52.223-19 Compliance with Environmental Management Systems. May 2011

52.223-23 Sustainable Products and Services. May 2024

52.228-5 Insurance-Work on a Government Installation. Jan 1997

52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013

52.244-6 Subcontracts for Commercial Products and Commercial Services. Jan 2025

Alternate/ Deviation

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023

252.225-7048 Export-Controlled Items. Jun 2013

252.232-7010 Levies on Contract Payments. Dec 2006

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023

252.243-7001 Pricing of Contract Modifications. Dec 1991

252.243-7002 Requests for Equitable Adjustment. Dec 2022

252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders

- Commercial Products and Commercial Services. (DEVIATION 2025-O0003 and 2025-O0004)

(Jan 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub.

L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) A 52.233-3, Protest After Award (Aug 1996) (31A U.S.C.A 3553).

(7) A 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19A U.S.C.A 3805A note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41A U.S.C.A 4704 and 10 U.S.C. 4655).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41A U.S.C.A 3509)).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31A U.S.C.A 6101A note).

(6) [Reserved].

(7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

(ii) Alternate I (Dec 2023) of 52.204-30.

X (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31A U.S.C.A 6101A note).

(13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41A U.S.C.A 2313).

(14) [Reserved].

(15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15A U.S.C.A 657a).

(16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15A U.S.C.A 657a).

(17) [Reserved]

(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15A U.S.C.A 644).

(ii) Alternate I (Mar 2020) of 52.219-6.

(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15A U.S.C.A 644).

(ii) Alternate I (Mar 2020) of 52.219-7.

(20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)(15A U.S.C.A 637(d)(2) and (3)).

(21)

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15A U.S.C.A 637(d)(4)).

(ii) Alternate I (Nov 2016) of 52.219-9.

(iii) Alternate II (Nov 2016) of 52.219-9.

(iv) Alternate III (Jun 2020) of 52.219-9.

(v) Alternate IV (Jan 2025) of 52.219-9.

(22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15A U.S.C.A 644(r)).

(ii) Alternate I (Mar 2020) of 52.219-13.

(23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15A U.S.C.A 657s).

(24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15A U.S.C.A 637(d)(4)(F)(i)).

(25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15A U.S.C.A 657f).

(26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15A U.S.C.A 632(a)(2)).

(ii) Alternate I (Mar 2020) of 52.219-28.

(27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15A U.S.C.

A 637(m)).

(28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15A U.S.C.A 637(m)).

(29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15A U.S.C.A 644(r)).

X (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

X (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

(32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025)(E.O. 13126).

(33) [Reserved]

(34) [Reserved]

(35)

X (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38A U.S.C.A 4212).

(ii) Alternate I (Jul 2014) of 52.222-35.

(36)

X (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29A U.S.C.A 793).

(ii) Alternate I (Jul 2014) of 52.222-36.

X (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38A U.S.C.A 4212).

(38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

(39)

X (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22A U.S.C.A chapterA 78 and E.O. 13627).

(ii) Alternate I (Mar 2015) of 52.222-50 (22A U.S.C.A chapterA 78 and E.O. 13627).

X (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42A U.S.C.A 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42A U.S.C.A 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

(43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

(44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

(45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

(46) 52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C.

7671l).

(47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

(ii) Alternate I (Jan 2017) of 52.224-3.

(48)

X(i) 52.225-1, Buy American-Supplies (Oct 2022) (41A U.S.C.A chapterA 83).

(ii) Alternate I (Oct 2022) of 52.225-1.

(49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C.

4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112- 42, and 112-43.

(ii) Alternate I [Reserved].

(iii) Alternate II (Jan 2025) of 52.225-3.

(iv) Alternate III (Feb 2024) of 52.225-3.

(v) Alternate IV (Oct 2022) of 52.225-3.

X (50) 52.225-5, Trade Agreements (NOV 2023) (19A U.S.C.A 2501, et seq., 19A U.S.C.A 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42A U.S.C.A 5150).

(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42A U.S.C.A 5150).

(55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

(56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

(57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41A U.S.C.A 4505, 10 U.S.C. 3805).

(58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41A U.S.C.A 4505, 10 U.S.C. 3805).

X (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31A U.S.C.A 3332).

(60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31A U.S.C.A 3332).

(61) 52.232-36, Payment by Third Party (May 2014) (31A U.S.C.A 3332).

(62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5A U.S.C.A 552a).

(63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15A U.S.C.A 637(d)(13)).

(65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10A U.S.C.A 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

X (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41A U.S.C.A chapter67).

X (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29A U.S.C.A 206 and 41A U.S.C.A chapterA 67).

X (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29A U.S.C.

A 206 and 41A U.S.C.A chapterA 67).

X (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41A U.S.C.A chapterA 67).

(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) (41A U.S.C.A chapterA 67).

(6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41A U.S.C.

A chapterA 67).

(7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

X (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42A U.S.C.A 1792).

(10) 52.247-69, Reporting Requirement for U.S.-Flag Air Carriers Regarding Training to Prevent Human Trafficking (Jan 2025) (49 U.S.C. 40118(g)).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41A U.S.C.A 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub.

L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii)

(A) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

(B) Alternate I (Dec 2023) of 52.204-30.

(viii) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15A U.S.C.A 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities.

If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) [Reserved]

(x) [Reserved]

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38A U.S.C.A 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29A U.S.C.A 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38A U.S.C.A 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) (41A U.S.C.A chapterA 67).

(xvi)

(A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22A U.S.C.A chapterA 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22A U.S.C.A chapterA 78A andA E.O.A 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment- Requirements (May 2014) (41A U.S.C.A chapterA 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41A U.S.C.

A chapterA 67).

(xix) 52.222-54, Employment Eligibility Verification (Jan 2025) (E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii)

(A) 52.224-3, Privacy Training (Jan 2017) (5A U.S.C.A 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42A U.S.C.A 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(xxvii) A 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10A U.S.C.A 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

52.217-8 Option to Extend Services. (Nov 1999)

As prescribed in 17.208(f), insert a clause substantially the same as the following:

Option to Extend Services (Nov 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 60 days[insert the period of time within which the Contracting Officer may exercise the option].

52.217-9 Option to Extend the Term of the Contract. (Mar 2000)

As prescribed in 17.208(g), insert a clause substantially the same as the following:

Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 [insert the period of time within which the Contracting Officer may exercise the option]; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days[60days unless a different number of days is inserted] before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 66 months (months) (years).

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

As prescribed in 211.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery;

and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency

Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

http://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html http://www.aimglobal.org/?Reg_Authority15459 http://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense

Acquisition Program as specified in Attachment Number .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC

International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that-

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information

Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for

Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded Items, Contract Data

Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

http://dodprocurementtoolbox.com/site/uidregistry/ http://dodprocurementtoolbox.com/site/uidregistry/%3B

252.239-7002 Access. (Dec 1991)

As prescribed in 239.7411(a), use the following clause:

ACCESS (DEC 1991)

(a) Subject to military security regulations, the Government shall permit the Contractor access at all reasonable times to Contractor furnished facilities. However, if the Government is unable to permit access, the Government at its own risk and expense shall maintain these facilities and the Contractor shall not be responsible for the service involving any of these facilities during the period of nonaccess, unless the service failure results from the Contractor's fault or negligence.

(b) During periods when the Government does not permit Contractor access, the Government will reimburse the Contractor at mutually acceptable rates for the loss of or damage to the equipment due to the fault or negligence of the Government. Failure to agree shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

252.239-7004 Orders for Facilities and Services. (Sep 2019)

ORDERS FOR FACILITIES AND SERVICES (SEP 2019)

(a) Definitions. As used in this clause-

"Governmental regulatory body" means the Federal Communications Commission, any statewide regulatory body, or any body with less than statewide jurisdiction when operating under the state authority. Regulatory bodies whose decisions are not subject to judicial appeal and regulatory bodies which regulate a company owned by the same entity that creates the regulatory body are not governmental regulatory bodies.

(b) The Contractor shall acknowledge a communication service authorization or other type order for supplies and facilities by-

(1) Commencing performance after receipt of an order; or

(2) Written acceptance by a duly authorized representative.

(c) The Contractor shall furnish the services and facilities under this agreement/contract in accordance with all applicable tariffs, rates, charges, regulations, requirements, terms, and conditions of-

(1) Service and facilities furnished or offered by the Contractor to the general public or the Contractor's subscribers; or

(2) Service as lawfully established by a governmental regulatory body.

(d) The Government will not prepay for services.

(e) For nontariffed services, the Contractor shall charge the Government at the lowest rate and under the most favorable terms and conditions for similar service and facilities offered to any other customer.

(f) Recurring charges for services and facilities shall, in each case, start with the satisfactory beginning of service or provision of facilities or equipment and are payable monthly in arrears.

(g) Expediting charges are costs necessary to get services earlier than normal. Examples are overtime pay or special shipment. When authorized, expediting charges shall be the additional costs incurred by the Contractor and the subcontractor. The Government shall pay expediting charges only when-

(1) They are provided for in the tariff established by a governmental regulatory body; or

(2) They are authorized in a communication service authorization or other contractual document.

(h) When services normally provided are technically unacceptable and the development, fabrication, or manufacture of special equipment is required, the

Government may-

(1) Provide the equipment; or

(2) Direct the Contractor to acquire the equipment or facilities. If the Contractor acquires the equipment or facilities, the acquisition shall be competitive, if practicable.

(i) If at any time the Government defers or changes its orders for any of the services but does not cancel or terminate them, the amount paid or payable to the

Contractor for the services deferred or modified shall be equitably adjusted under applicable tariffs filed by the Contractor with the regulatory commission in effect at the time of deferral or change. If no tariffs are in effect, the Government and the Contractor shall equitably adjust the rates by mutual agreement. Failure to agree on any adjustment shall be a dispute concerning a question of fact within the meaning of the Disputes clause of this contract.

252.239-7007 Cancellation or Termination of Orders. (Sep 2019)

CANCELLATION OR TERMINATION OF ORDERS (SEP 2019)

(a) Definitions.

"Actual nonrecoverable costs" means the installed costs of the facilities and equipment, less cost of reusable materials, and less net salvage value.

"Basic cancellation liability" means the actual nonrecoverable cost, which the Government shall reimburse the Contractor at the time services are cancelled.

"Basic termination liability" means the nonrecoverable cost amortized in equal monthly increments throughout the liability period.

"Installed costs" means the actual cost of equipment and materials specifically provided or used, plus the actual cost of installing (including engineering, labor, supervision, transportation, rights-of-way, and any other items which are chargeable to the capital accounts of the Contractor), less any costs the government may have directly reimbursed the Contractor under the Special Construction and Equipment Charges clause of this agreement/contract.

"Net salvage value" means the salvage value less the cost of removal.

(b) If the Government cancels any of the services ordered under this agreement/contract, before the services are made available to the Government, or terminates any of these services after they are made available to the Government, the Government will reimburse the Contractor for the actual nonrecoverable costs the Contractor has reasonably incurred in providing facilities and equipment for which the Contractor has no foreseeable reuse. The Government will not reimburse the Contractor for any actual nonrecoverable costs incurred after notice of award, but prior to execution of the order.

(c) When feasible, the Contractor shall reuse cancelled or terminated facilities or equipment to minimize the charges to the Government.

(d) If at any time the Government requires that telecommunications facilities or equipment be relocated within the Contractor's service area, the Government will have the option of paying the costs of relocating the facilities or equipment in lieu of paying any termination or cancellation charge under this clause. The basic cancellation liability or basic termination liability applicable to the facilities or equipment in their former location shall continue to apply to the facilities and equipment in their new location. Monthly recurring charges shall continue to be paid during the period.

(e) When there is another requirement or foreseeable reuse in place of cancelled or terminated facilities or equipment, no charge shall apply and the basic cancellation liability or basic termination liability shall be appropriately reduced. When feasible, the Contractor shall promptly reuse discontinued channels or facilities, including equipment for which the Government is obligated to pay a minimum service charge.

(f) The amount of the Government's liability upon cancellation or termination of any of the services ordered under this agreement/contract will be determined under applicable tariffs governing cancellation and termination charges which-

(1) Are filed by the Contractor with a governmental regulatory body, as defined in the Rates, Charges, and Services clause of this agreement/contract;

(2) Are…