08-06 Tech Data Rev.pdf

PDF 113 KB Posted

Attached to
Shirt, Men's, S/S, Khaki, Athletic and Classic, Navy
Solicitation number
SPE1C1-23-R-0128
Issued by

About this file

This document provides technical specifications for men's short sleeve shirts to be procured by the Defense Logistics Agency Troop Support Clothing and Textiles directorate. The specifications cover details of the shirt fabric, which is to be tropical polyester and wool cloth in khaki shade 3729 conforming to quality standard NCTRF PD 04-06. Specific requirements are provided for thread color, labeling, and packaging. Each shirt must have a non-curl label sewn inside the neck, a size label including National Stock Number on the plastic bag, and be packaged individually in a plastic bag. Additional quality assurance standards and technical requirements referenced include MIL-STD-129R for marking, MIL-STD-147E for palletized loads, and MIL-STD-1492C for sampling provisions for visual inspection.

View the file

Other files

File Type Posted
08-06 Packaging tech data.pdf PDF
0806 Tech Data Rev C.pdf PDF
NCTRF PD 08-06C - Shirt Mans Service - 5-1-2023.pdf PDF
PD08_06_TYPEI_TYPEII JULY 2023.pdf PDF
0806 Packaging.pdf PDF
PGC 03298 UPC.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

The shirt, man's, service, khaki shall be made in accordance with NCTRF PD 08-06C dated 1 May 2023 Pattern date: 24 July 2023 Standard sample of cloth, tropical: polyester and wool, khaki shade 3729, is available and applicable for shade, physicals, colorfastness to light, laundering, perspiration (acid and alkaline), wet-dry cleaning, crocking (wet,dry),under NCTRF PD 04-06, class 2; Piece number 17102 applies.

Interim changes to NCTRF PD-08-06B:

Page 6, paragraph 3.3.3, lines 2 and 3, delete: "The thread color shall be Khaki P-1, Cable No. 66019 in accordance with DoD Standard Shades for Sewing Threads." and substitute: "The thread color shall match the basic material, NCTRF PD 04-06, Class 2.".

Page 7, paragraph 3.3.6.1, lines 9 and 10, delete and substitute:

"NAME____________________________________________________".

"Page 7, paragraph 3.3.6.2, line 5, delete the last sentence and substitute: "Abbreviations shall not be used for the body type for Classic and Athletic fits, and shall be completely spelled out on all size labels."

THE CONTRACTOR SHALL STAMP LEGIBLY WITH INDELIBLE INK THE LOT NUMBER ON EACH END ITEM AND

OUTER CONTAINER IN THE LOT.

LIST OF DOUMENTS, EXHIITS, AND OTHER ATTACHMENTS

A. THIS SOLICITATION/AWARD CONSISTS OF TYE FOLLOWING DOCUMENTS. EXHIBITS, AND OTHER

ATTACHMENTS.

B. DLA TROOP SUPPORT CLOTHINGG AND TEXTILES ADDITIONAL QUALITY ASSURANCE

REQUIREMENTS DATED “AUGUST 2021”

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY

REQUIREMENTS FOUND ON THE WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR MIL-STD-1492C:

MIL-STD-1492C, PAGES 7-8, TABLE II, DELETE IN

ITS ENTIRETY AND SUBSTITUTE: "TABLE II

SAMPLING PROVISIONS FOR END ITEM VISUAL

EXAMINATION OF SEMI-DRESS (SD) SHIRTS

NORMAL INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALUES

. 3&2 PT 3,2,1 PT

. DEFECTS DEFECTS

UP THRU 500 50 5 10

501-1200 80 7 14 1201-3200 125 10 20 3201-10,000 200 14 29 10,001-35,000 315 20 42

35,001 & OVER 500 30 62

TIGHTENED INSPECTION

UP THRU 500 50 3 7

501-1200 80 5 11 1201-3200 125 7 15 3201-10,000 200 11 23 10,001-35,000 315 17 34

35,001 & 0VER 500 25 52

REDUCED INSPECTION

LOT SZ SAMP SZ MAX ACCP PT VALUES

. 3&2 PT 3,2,1 PT

. DFCTS 1/ DEFECTS

UP THRU 1200 32 3-7 11

1201-3200 50 5-9 14 3201-10,000 80 7-11 19 10,001-35,000 125 10-14 24

35,001 & OVER 200 14-18 34

1/ IF THE FIRST VALUE IS EXCEEDED BUT THE SECOND

VALUE HAS NOT BEEN EXCEEDED, ACCEPT THE LOT BUT

REINSTATE NORMAL INSPECTION (SEE 5.5.4B). THE

SECOND VALUE IS THE MAXIMUM ACCEPTABLE POINT

VALUE."

MIL-STD-129R w/CHANGE 2 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR

SHIPMENT AND STORAGE

DATED: 27 SEPTEMBER 2019

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF

MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN.

NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL

BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E w/CHANGE 2

27 JUNE 2019

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000

Examination of packaging requirements. An examination shall be made to determine that packaging, packing, and marking comply with MIL-STD-129, MIL-STD-2073-1D, ASTM D5118, and ASTM D1974. Defects shall be scored in accordance with the list below. The sample unit shall be one shipping container fully prepared for delivery. The lot size shall be the number of shipping containers in the end item inspection lot.

The inspection level shall be S-2 and the acceptable quality level (AQL) shall be 2.5, expressed in term of defects per hundred units.

Examine Defect

Marking Omitted,incorrect,illegible,of improper (Exterior and size, location,sequence, or method of interior) application.

Materials Any component missing, damaged, or not as specified.

Workmanship Inadequate application of components, such as: incomplete closure of flags, loose strapping, imprper taping, inadequate stapling, bulged or distorted containers.

Content Number of items per shipping container is more or less than required. Size shown on one or more items not as specified on shipping container. 1/

1/ For this defect, one item from each shipping container in the sample shall be examined..

CLOTH, TROPICAL: POLYESTER AND WOOL, CLASS 1 and 2

ADDITIONAL INFORMATION FOR NTCRF PD 04-06, CLASS 1:

STANDARD SAMPLE FOR CLOTH, TROPICAL: POLYESTER AND WOOL, BLUE 3346 CONFORMING TO NCTRF PD 04-06, IS AVAILABLE ON ROLL NO. 10163, AND APPLICABLE FOR SHADE, FINISH AND COLORFASTNESS.

ADDITIONAL INFORMATION FOR NTCRF PD 04-06, CLASS 2:

STANDARD SAMPLE FOR CLOTH, TROPICAL: POLYESTER AND WOOL, KHAKI 3729 CONFORMING TO NCTRF PD 04-06, IS AVAILABLE ON ROLL NO. 06081, AND APPLICABLE FOR SHADE, FINISH AND COLORFASTNESS.

RECOMMEND 100 PERCENT SHADE VERIFICATION FOR EACH LOT PRESENTED TO GOVERNMENT FOR LIFE OF THE ITEM. . . Each shirt/blouse shall have a non-curl label approximately 1-1/2" X 1-1/2" sewn inside at neck.

"Classic" or "Athletic" shall be clearly identified in 12pt. font (include bust measurement on female over blouse), a UPC stick-on label approximately 2" X 2-1/2", and placed on the right front bottom of the bag including NSN and size as specified.

Recruit Training Center (RTC) - Each shirt/blouse shall also be packaged in a plastic bag. Refer to the packaging data for specific information relating to this item.

File details come from the government source that posted it. Updated .