03_11_00_Concrete_Forms_and_Accessories.pdf
PDF 113 KB Posted
- Solicitation number
- 25/26-0019
- Issued by
- San Bernardino County, California
About this file
This is a specification document for concrete forms and accessories prepared by Fontana Unified School District, detailing the technical requirements and standards for formwork used in cast-in-place concrete construction projects. The specification covers the design, materials, installation, and removal of concrete forms, including formwork for structural members, embedded items such as anchor bolts and inserts, and related accessories. The document references industry standards from the American Concrete Institute (ACI), American Plywood Association (APA), and National Institute of Standards and Technology (NIST), as well as California Building Code requirements and state construction safety orders. Key submittal requirements include detailed structural calculations and drawings approved by a California registered Civil Engineer for falsework exceeding 14 feet in height or 16 feet in span length, shop drawings indicating form locations and joints, and product data for form materials and accessories.
The specification establishes comprehensive material standards requiring form lumber of WCLIB Construction Grade or better, exterior grade plywood conforming to NIST Voluntary Product Standard PS 1 with minimum thicknesses of 3/4 inch for exposed locations and 5/8 inch for unexposed locations, and specialized materials such as seamless sonotubes, steel forms, and glass-fiber-reinforced plastic forms for exposed concrete finishes. Form removal timelines are prescribed based on member type, with columns and walls requiring minimum five days of curing, floor slabs and ramps seven days, and beams and girders fifteen days before form removal. The specification mandates 3/4 inch by 3/4 inch chamfer strips for all exposed concrete corners and edges, establishes surface finish tolerances ranging from 1/8 inch for Class A prominently exposed surfaces to 1 inch for Class D concealed surfaces, and requires field-cured concrete strength testing to verify adequate curing before form removal and shoring removal.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Fontana Unified School District CONCRETE FORMS and ACCESSORIES
03 11 00
Revised: 01/07/22 Page 1 of 5
Concrete Forms & Accessories
03 11 00
PART 1 - GENERAL
1.01 SUMMARY
A. Provisions of Division 01 apply to this section
B. Section Includes:
1. Formwork for cast-in-place concrete as indicated.
2. Installation of items to be embedded in concrete, such as anchor bolts, inserts, embeds, and sleeves.
C. Related Sections:
1. Section 03 20 00: Concrete Reinforcement.
2. Section 03 30 00: Cast-In-Place Concrete.
1.02 REFERENCES
A. American Concrete Institute (ACI) Publication:
1. ACI 318 – Building Code Requirements for Structural Concrete, Chapter 6, Formwork, Embedded Pipes, and Construction Joints.
2. ACI 347 – Guide to Formwork for Concrete.
B. American Plywood Association (APA):
1. Form No. V345 - Concrete Forming Design/Construction Guide.
C. National Institute of Standards and Technology (NIST):
1. NIST Voluntary Product Standard PS 1.
1.03 SUBMITTALS
A. Submit detailed structural calculations and drawings approved and signed by a California registered Civil Engineer where the height of the falsework or vertical shoring, as measured from the top of the sills to the soffit of the superstructure exceeds 14 feet, or where individual horizontal span lengths exceed 16 feet, or where provision for vehicular traffic through falsework or shoring occurs. For all other falsework and shoring submit layout signed by California registered Civil Engineer, manufacturer’s authorized representative or a licensed contractor experienced in the usage and erection of falsework and vertical shoring.
A copy of the plans and calculation shall be available at the jobsite at all times.
B. Shop Drawings: Submit Shop Drawings indicating locations of forms, construction and expansion joints, embedded items, and accessories.
C. Product Data: Submit manufacturer's Product Data for form materials and accessories.
03 11 00
Revised: 01/07/22 Page 2 of 5
Concrete Forms & Accessories
03 11 00
1.04 REGULATORY REQUIREMENTS
A. California Building Code (CBC), Chapter 19A.
B. California Code of Regulations, Title 8, Division 1, Chapter 4, Subchapter 4, Construction Safety Orders, Article 6, Excavations, Sections 1713 and 1717.
1.05 DELIVERY, STORAGE AND HANDLING
A. Storage shall prevent damage and permit access to materials for inspection and identification.
PART 2 - PRODUCTS
2.01 GENERAL
A. Form materials may be reused during progress of the Work provided they are completely cleaned and reconditioned, recoated for each use, capable of producing formwork of required quality, and are structurally sound.
B. Form Lumber: WCLIB Construction Grade or Better, WWPA No. 1 or Better.
C. Plywood: NIST Voluntary Product Standard PS 1, Group 1, Exterior Grade
B-B Plyform or better, minimum 5-ply and 3/4 inch thick for exposed locations and at least 5/8 inch thick for unexposed locations, grade marked, not mill oiled. Furnished plywood with medium or high density overlay is permitted.
D. Coated Form Plywood: For exposed painted concrete, plastic overlaid plywood of grade specified above, factory coated with a form coating and release agent Nox-crete", or equal.
E. Tube Forms: Sonoco "Seamless Sonotubes,” or equal, of the type leaving no marks in concrete, one-piece lengths for required heights.
F. Joist Forms: Code recognized steel or molded plastic types as required.
G. Special Forms: For exposed integrally-colored concrete, plywood as above with high density overlay, plywood with integral structural hardboard facing or fibrous glass reinforced plastic facing, providing specified finish.
H. For Exposed Concrete Finish:
1. Plywood: New, waterproof, synthetic resin bonded, exterior type
Douglas fir or Southern pine plywood manufactured especially for concrete formwork and conforming to NIST Voluntary Product
Standard PS 1, Grade B-B grade, Class I.
2. Glass-Fiber-Fabric Reinforced Plastic Forms: Matched, tight fitting, stiffened to support weight of concrete without deflection detrimental to structural tolerances and appearance of finished concrete surfaces.
03 11 00
Revised: 01/07/22 Page 3 of 5
Concrete Forms & Accessories
03 11 00
3. Steel: Minimum 16 gage sheet, well matched, tight fitting, stiffened to support weight of concrete, without deflection detrimental to tolerances and appearances of finished concrete surfaces.
4. Plywood: "Finland Form or "Combi Form" distributed by North
American Plywood Corporation. The material shall be furnished with hard smooth birch face veneers with phenolic resin thermally fused onto panel sides. Edges shall be factory sealed.
I. Form Ties: Prefabricated rod, flat band, wire, internally threaded disconnecting type, not leaving metal within 1-1/2 inch of concrete surface.
J. Form Coating: Non-staining clear coating free from oil, silicone, wax, not grain-raising, "Formshield" by A.C. Horn, Inc., "Release" by Edoco/Dayton
Superior, or "Cast-Off" by Sonneborn/BASF Building Systems. Where form liners are furnished, provide form coatings recommended by form liner manufacturer.
K. Form Liner: Rigid or resilient type by L.M. Scofield, Symons, or Greenstreak.
L. Void Forms: Manufactured by SureVoid Products, Inc., or equal. Forms shall be "WallVoid" for temporary support of concrete walls and grade beams spanning between supports, and "SlabVoid" for creating gaps between concrete slabs or steps and underlying soils. Void forms shall be fabricated of corrugated paper with moisture resistant exterior, and shall be capable of withstanding working load of 1,500 psf. Provide accessories as required.
PART 3 - EXECUTION
3.01 GENERAL
A. Forms shall be constructed so as to shape final concrete structure conforming to shape, lines and dimensions of members required by
Drawings and Specifications, and shall be sufficiently tight to prevent leakage of mortar. They shall be properly braced or tied together to maintain position and shape. Forms and their supports shall be designed so that previously placed structures will not be damaged.
3.02 TOLERANCES
A. Permitted abrupt or gradual irregularities in formed surfaces as measured within a 5 feet length with a straightedge shall per ACI 347, Table 3.1:
Class of Surface
A B C D
1/8 inch 1/4 inch 1/2 inch 1 inch
Note To Specifier: Edit tolerances indicated below for project specifics.
03 11 00
Revised: 01/07/22 Page 4 of 5
Concrete Forms & Accessories
03 11 00
1. Class A: Use for concrete surfaces prominently exposed to public view.
2. Class B: Use for coarse-textured concrete-formed surfaces intended to receive plaster, stucco or wainscoting.
3. Class C: Use as a general standard for permanently exposed surfaces where other finishes are not specified.
4. Class D: Use for surfaces where roughness is not objectionable and will be permanently concealed.
3.03 ERECTION
A. Plywood shall be installed with horizontal joints level, vertical joints plumb and with joints tight. Back joints by studs or solid blocking, and fill where necessary for smoothness. Reused plywood shall be thoroughly cleaned, damaged edges or surfaces repaired and both sides and edges oiled with colorless form oil. Nail plywood along edges, and to intermediate supports, with common wire nails spaced as necessary to maintain alignment and prevent warping.
B. Openings for Cleaning: Provide temporary openings at points in formwork to facilitate cleaning and inspection. At base of walls and wide piers, bottom form board on one face for entire length shall be omitted until form has been cleaned and inspected.
C. Chamfers: Provide 3/4 inch by 3/4 inch chamfer strips for all exposed concrete corners and edges unless otherwise indicated.
D. Reglets and Rebates: As specified in Section 03 30 00: Cast-In-Place
Concrete.
3.04 REMOVAL OF FORMS
A. Forms shall not be removed until concrete has sufficiently hydrated to maintain its integrity and not be damaged by form removal operations.
Unless noted otherwise and/or permitted by the Architect, columns and wall forms shall not be removed in less than 5 days, floor slabs in less than 7 days, beams and girders in less than 15 days, pan forms for joists may be removed after 3 days, but joist centering shall not be removed until after
15 days, and ramp, landing, steps and floor slabs shall not be removed in less than 7 days. Shoring shall not be removed until member has acquired sufficient strength to support its weight, load upon it, and added load of construction.
B. Compressive strength of in-place concrete shall be determined by testing field-cured specimens representative of concrete location or members, as specified in Section 03 30 00: Cast-In-Place Concrete.
03 11 00
Revised: 01/07/22 Page 5 of 5
Concrete Forms & Accessories
03 11 00
3.04 PROTECTION
A. Protect the Work of this section until Substantial Completion.
3.05 CLEAN UP
A. Remove rubbish, debris and waste materials and legally dispose of off the
Project site.
END OF SECTION
File details come from the government source that posted it. Updated .