01 22 00 MEASUREMENT AND PAYMENT - Updated 10-25-22.pdf

MEASUREMENT AND PAYMENT, REV 10-25-22 01 22 00

Oxbow Hatchery Rearing Pond Repairs Engineering Project # 22-024

SECTION 01 22 00 – MEASUREMENT AND PAYMENT

PART 1 – GENERAL

1.1 MEASUREMENT AND PAYMENT AND DESCRIPTION OF BID ITEMS

A. Partial payment of bid items shall be in conformance with the General Conditions. Partial payment for Work completed, and materials installed which will become an integral part of the finished Work, shall be determined by the Owner’s Authorized Representative and shall be made on the basis of duly certified and approved estimates of the Work, which, in the opinion of the Owner’s Authorized Representative, has been satisfactorily completed. It is understood that the determination by the Owner’s Authorized Representative as to whether or not a certificate or estimate for payment should be issued, or the amount of said payment, shall be based entirely upon the opinion of the Owner’s Authorized Representative. Said de-termination shall include without limitation the following factors:

1. All phases of the Work being accomplished in a proper manner and being pursued in a proper sequence of operation, particularly with regard to testing, cleanup, and surface res-toration.

2. The observance by the Contractor of the requirement that all Work and operations be pre-ceded by necessary submittals and approvals.

3. On the monthly estimates, partial payments for Work performed but not completed, may be made in accordance State of Oregon General Conditions for Public Improvement Con-tracts (General Conditions).

4. Retainage may be deducted from the above amounts as specified in the Contract.

a. The Contract price shall constitute full compensation for furnishing all plant, labor, equipment and materials, mobilization, demobilization, travel, and performing all op-erations required to complete the work, as specified or incidental to, and as shown on the Drawings and Technical Specifications.

1.2 BASE BID

A. GENERAL

1. Bid Item – Mobilization, Demobilization, and Bonding – Lump Sum

The lump sum price for mobilization and demobilization includes, but is not limited to, preparatory work and operations necessary for the movement of personnel, equipment, supplies, and incidentals to and from the project site; for the establishment of offices, buildings and other temporary facilities necessary for the work; costs for permit fees, bonds and insurance for the work; site cleanup during the project and at the completion of the project; project record documents, and for other operations performed or costs in-curred before the beginning of the Work.

2. Bid Item – Injection Port Prep – Lump Sum The lump sum price for installation of grout injection ports through the slab of ponds #1- 3 as shown on the Drawings. Shall include all labor, equipment, and materials needed to complete the improvements. Item includes, but is not limited to, drilling of holes, instal-lation of injection ports, and cleanup.

3. Bid Item – Soilgrout Injection – Gallon

The unit price for injection of soilgrout through the slab of ponds #1-3 as shown on the Drawings. Payment will be determined based on gallons of product used. Voids are es-timated to be approximately 45 cubic yards in the requested area, so materials should be

MEASUREMENT AND PAYMENT, REV 10-25-22 01 22 00

Oxbow Hatchery Rearing Pond Repairs Engineering Project # 22-024 ordered based on rate of expansion expected for reactive chemical grouts. Shall include all labor, equipment, and materials needed to complete the improvements. Item includes, but is not limited to, mixing of soilgrout, application of soilgrout, and cleanup.

PART 2 – PRODUCTS (NOT USED)

PART 3 – EXECUTION (NOT USED)

END OF SECTION 01 22 00