00017062 Plans.pdf
PDF 289 KB Posted
- Attached to
- US 97: Inlay Paving MP 113. 6-MP 114. 7
- Solicitation number
- S-73000-00017062
- Issued by
- Deschutes County, Oregon
About this file
This is a construction design plan document from the Oregon Department of Transportation for Deschutes County, prepared by registered professional engineer Brian J. Hughes. The project involves inlay paving work on US Highway 97 between mile posts 113.6 and 114.7 near The Dalles, California. The plan details the installation of pavement marking elements, including centerline rumble strips, pavement markers (Type 1AR recessed bi-directional yellow), and continuous centerline striping on a two-lane roadway section. The rumble strip groove specifications call for a 12-inch width with a maximum depth of 8.5 inches and minimum depth of 2.5 inches. The design includes provisions to omit centerline rumble strips on bridge decks and portland cement concrete surfaces, avoid breaking rumble strips at private driveways, and maintain a minimum 2-inch clearance from rumble strips to other pavement markings.
The document provides technical construction specifications and cross-sectional details for proper installation of the roadway safety and marking features. The plan was finalized on November 10, 2015, and shows typical intersection configurations for the two-lane roadway application. No pricing, contract award dates, bid response deadlines, or funding source information is included in this technical design document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 00017062 Special Provisions.docx | DOCX document | |
| 00017062 Bid Pricing Form.xlsx | XLSX spreadsheet | |
| 00017062 ITB.docx | DOCX document | |
| 00017062 Sample Contract.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OF TRANSPORTATION
OREGON DEPARTMENT
Checker:Drafter:
Designer:
SHEET NO.
Reviewer:
AVAILABLE UPON REQUEST
FINAL ELECTRONIC DOCUMENT
ESCHUTES COUNTYD
HE DALLES CALIFORNIA HIGHWAYT
US97: US97 Inlay Paving MP 113.6 - MP114.7 PROJECT
F O
T N
E
MTRAPED
N
O G
E R
O
N
OI
T
ATROPS
N A
R T
Mark S. Barrett
Mark S. Barrett
Brian J. Hughes
Brian J. Hughes
PAVEMENT MARKING DETAILS
OREGON
RE
GI
ST
ERE
D PROFESSIONALEN
GINEER
90854
RENEWS: 06-30-2027
N
O V. 10, 2
B R
IA
N
JAMES H
U G
H E S pavement markers type 1AR recessed
Bi-directional yellow
Construction joint
2"
" 1
10'30'
40'
1'
Roadway �
Roadway � rumble strip pattern Continuous
Centerline Striping
CENTERLINE RUMBLE STRIP PLACEMENT
GENERAL NOTES:
1. Install rumble strips on centerline as shown.
of 2" from rumble strips, pavement markers, and pavement markings.
3. Omit centerline rumble strips:
*on bridge decks
*on portland cement concrete surfaces
4. Do not break rumble strips at private driveways.
" Max.8 5" Min. - 2
1R=12" Max.
surfacing Extg.
surfacing Extg.
12"
D ir e c ti o n o f tr a ff ic
PLAN
SECTION B-B
SECTION A-A
B
A
A
B
" Max.8 5" Min. - 2
7"
RUMBLE STRIP GROOVE
12"
S
T ra v e l L a n e
T ra v e l L a n e
Striping Centerline
Groove Rumble Strip S
S
Striping Centerline
CENTERLINE INSTALLATION
RUMBLE STRIP CONTINUOUS PATTERN
Rumble Strip
25'
25'
Roadway �
Lines Groove-Installed
(2-LANE ROADWAY)
TYPICAL INTERSECTION
QA01
D10_Paving.dgn :: Des Detrour 5/20/2026 1:55:12 PM hwye40m
| 2026-05-20T13:56:37-0700 | |
| HUGHES Brian J |
File details come from the government source that posted it. Updated .