00016528_Plans_msdt.pdf
PDF 199 KB Posted
- Attached to
- Brooks Quarry Sanding Rock Production
- Solicitation number
- S-73000-00016528
- Issued by
- Washington County, Mission CDP, Oregon
About this file
This is an engineering plan document prepared by the Oregon Department of Transportation (ODOT) District 10 (Mitchell) for a prospective material source at Brooks Quarry, located in Wheeler County on US 26 (Highway 041) at Mile Post 59.48. The project involves the production and stockpiling of sanding rock aggregate in Sec. 25, T. 11 S., R. 20 E., W.M., with associated work including excavation, bench access road construction, and safety berm installation. The engineering plans, dated March 23, 2026, include cross-sectional drawings showing existing ground conditions, finish grades, and slope ratios of 4 vertical to 1 horizontal. The document is prepared by certified Oregon Engineering Geologist Scott D. Billings (License E1538, expires 01-01-2027) and reviewed by Russell G. Frost, with design scale at 1"=60'. The prospective material source is identified as OR-35-014-4 with DOGAMI number 35-0021.
The engineering plan establishes the technical specifications and site conditions for the Brooks Quarry operation, which supports ODOT's requirement to produce and stockpile 10,000 cubic yards of specified aggregate. The document contains detailed elevation profiles, excavation boundaries, and construction requirements necessary for bidders to understand the scope and site conditions. No specific pricing, contract terms, response deadlines, or funding sources are detailed within this technical plan document, as it serves primarily as the engineering design basis for the prospective material source contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 0016528_Plans_mspl.pdf | ||
| 00016528 RFCQ.docx | DOCX document | |
| 00016528 Material Source Narrative.pdf | ||
| 00016528 Special Provisions.docx | DOCX document | |
| 00016528 Sample Contract.docx | DOCX document | |
| 00016528 Add 1.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AVAILABLE UPON REQUEST
FINAL ELECTRONIC DOCUMENT
OF TRANSPORTATION
OREGON DEPARTMENT
Checker:Drafter:
Designer:
SHEET NO.
Reviewer:
OCHOCO HIGHWAY
WHEELER COUNTY
F
O T
N E
MTRAPED
N
O G
E R
O
N
OI
T
ATROPS
N A
R T
PRODUCTION 2026
DISTRICT 10 (MITCHELL) SANDING ROCK
GE_K20120_msdt_01.dgn :: Default 3/23/2026 8:12:39 AM hwye43o 1"=60' Scale: Rotation: 0°
E le v a ti o n ft
0 100 200 300 400
E le v a ti o n ft
E le v a ti o n ft
0 100 200 300 400
E le v a ti o n ft
SECTION A-A
Scale:1"=60'
Distance (ft.)
SECTION B-B
Scale:1"=60'
Distance (ft.)
2580 2580
Existing Ground
Existing Ground
Finish GroundFinish Ground
Finish Ground
V :1
H
V :1
H
SCALE WARNING
DRAWING IS NOT TO SCALE
MEASURE ONE INCH, THEN
IF THIS SCALE LINE DOES NOT
LEGEND
Bench Access Road
= Excavation Area
Construct Safety Berm
Scott D. Billings
Scott D. Billings N/A
GE02
NOTE: For location of cross sections shown, see sheet "GE01".
Russell G. Frost
C RETIIFED
OREGON
E N
GINEERING GEOLO
G
STI
E1538
SCOTT D. BILLINGS
EXPIRES: 01-01-2027
PROSPECTIVE MATERIAL SOURCE
Sec. 25, T. 11 S., R. 20 E., W.M.4
NE
US 26 (HWY. 041), M.P. 59.48
SOURCE #OR-35-014-4 DOGAMI #35-0021
BROOKS QUARRY
PROSPECTIVE MATERIAL SOURCE
Bench Access Road
| 2026-03-23T08:13:52-0700 | |
| Scott D. Billings |
File details come from the government source that posted it. Updated .