Strain Gage Alignment
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
Solicitation number 70Z04020Q60550Y00 applies and is used as a Request For Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016.
It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency.
The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.
The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items:
ITEM 1:
STATEMENT OF WORK FOR’ CGC Eagle
Propulsion Shafting, Strain Gage Alignment
Inspections
POC: LTJG Katherine, Beasley
Phone: 410-636-3470
SCOPE
Contractor to perform strain gage bearing reaction measurements on the CGC Eagle. Install the required instrumentation and make the pre dry-dock measurements in Groton, CT prior to the arrival of the vessel for the shipyard availability. The remaining (3) measurements will be conducted at the yard in Baltimore MD.
Vendor must have a database of bearing reaction measurements for 295’ CG Barque class vessel.
WORK ITEM 12: Propulsion Shafting, Strain Gage Alignment, Inspect
3.3 Alignment by strain gage method. The Contractor shall furnish all necessary equipment and install sufficient strain gages, measure strains, and calculate vertical and horizontal reactions using the strain gage measurement method. Install strain gages internally and externally to measure all the bearing reactions (external gages are not required in pre-docking inspection). All strain gages shall remain at the same locations throughout all required inspections. Perform the strain gage measurements under the direct supervision of personnel experienced in and regularly engaged in shaft alignment by the strain gage method.
3.3.1 Definitions and standard units. The Contractor shall ensure for the purposes of this specification, any reports generated, “optimal alignment” shall be defined as “a state of shaft alignment (though all phases of bearing wear down) where the bearing loads are within a satisfactory range, bending stresses are minimal, gear box bearings (Fwd and Aft) loads always remain positive and are near equal at midlife wear, the shaft slope through long bearings matches the bearing slope within a reasonable range, and horizontal loads are minimized as much as practical.” Whenever strain gauge is being performed in conjunction with components being moved or relocated e.g. foundations altered, chockfast poured, new strut being installed, new stern tube installed, etc. the goal shall be to achieve an “optimal alignment
3.3.1.1 Whenever “optimal alignment” cannot be achieved because the scope of associated work does not provide for relocation of components necessary to obtain optimal, then an acceptable state of alignment shall be obtained. Acceptable alignment shall be defined as “a state of achievable shaft alignment, whereby components are constrained (movement/relocations not within work scope), but the current bearing loads are within a satisfactory range and if possible remain satisfactory though continued bearing wear down, and horizontal loads are minimized as much as practical. Oftentimes, when present, an inboard line shaft bearing is the only component available to shim (vertically) or jack (horizontally) to change the “as measured” results.
3.3.1.2 All reports, correspondences, and discussions shall be in STANDARD / US CUSTOMARY UNITS and not in SI / METRIC UNITS.
3.3.2 Pre-drydock inspection. The Contractor shall submit a written report of results with the following information to the COR within 48 hours after alignment check:
All inboard bearing reactions, bearing offsets, bearing influence numbers, allowable bearing load, bearing clearances, etc
A description of the alignment procedures used to obtain the bearing loads
Strain gage locations
Bearing locations and reactions in shaft modeling
Detail dimensions and configuration of the shaft model
All mathematics values used in the shaft model such as material properties, spring constant, thermal growth effects, bearing offsets, all concentrated weights, etc
All assumptions applied in the shaft model
All constant values used in the shaft model
Any indication of misalignment
Bearing reactions at the calculated optimum shaft alignment condition
Any recommended corrective procedures. The recommended corrective procedures shall include, but not be limited to:
New bearing off-sets to achieve an optimum shaft alignment
· New bearing off-sets to achieve a satisfactory (acceptable) shaft alignment
Other alternative to achieve an optimum shaft alignment
Detailed procedures to achieve shaft alignment
3.3.3 Dry-docking inspection. After drydocking the vessel and before performing any hot work and/or structural modifications, the Contractor shall conduct a strain gage alignment inspection to determine all bearing reactions (five bearings per shaft) as specified in 3.3 through 3.3.2. Provide additional strain gauges, temporary wiring, and set-up on the shaft outboard as required for the three outboard bearing measurements. Submit a CFR with information as specified in 3.3.2 within 48 hours after alignment check.
3.3.4 Before re-floating alignment inspection. After all the hot work and/or structural modifications have been completed, and before re-floating the vessel, the Contractor shall conduct a strain gage alignment inspection of shaft alignment as specified in 3.3.3 and compare the results with dry-docking inspection. Submit a written report with any recommended further action to the COR within 48 hours after alignment check.
3.3.5 Post-drydock inspection. The Contractor shall conduct post-dry-dock inspection of shaft alignment per paragraph 3.2 through 3.3.2 for all the inboard and outboard bearings (total five bearings per shaft). Use similar set-up as the dry-docking inspection. Submit a CFR similar as the pre-dry-docking report including the additional information of the three outboard bearings of each shaft, within 24 hours after taking the strain gauge readings. The inspection report shall compare the findings of the inboard bearings with the pre-dry-dock conditions and provide analysis, comments and recommendations.
3.4 Alignment drawing. The Contractor shall provide an alignment drawing clearly showing all components including reduction gear and all bearings, a table of calculated influence numbers and reactions of each shaft bearing and reduction gear bearing at afloat and dry-docking conditions, and calculated optimum bearing reactions.
3.4.1 The Contractor shall ensure all bearing compression and clearances, bearing offsets relative to the bore sight reference line, General Notes, and related shaft reference drawings shall also be included on the drawing.
3.4.2 In addition, The Contractor shall provide a table of calculated bearing wear down analysis.
3.4.3 The Contractor shall submit a preliminary drawing to COR for approval within seven (7) calendar days after final alignment has been determined. After revising the drawing based on the comments of COR, submit two (2) sets of the final drawing to COR within 14 calendar days upon completion of work. Submit one set of inspection report and final drawing to the COR (See 4.1 (Result submittals)).
4. NOTES
4.1 Results submittal. The COR will forward a copy of shaft alignment related inspection results and drawing as specified in 3.3.2 thru 3.3.5, and 3.4 with all subparagraphs to the Engineering Branch of the applicable Product Line
ADDRESS: USCG YARD 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226
GOVERNMENT ACCEPTANCE: Acceptance will be made at destination by a Government representative. Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order.
FAR 52.212-1 Instructions to Offerors-Commercial Items (OCT 2015). Parties responding to this solicitation may submit their offer in accordance with their standard commercial practices to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or email. As a minimum, offers must show: (1) The solicitation number (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price. Delivery information and any discount terms; (7) “Remit to” address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. (12) Dun & Bradstreet number.
FAR 52.212-2 Evaluation-Commercial Items (OCT 2014). – This is a commercial services acquisition. The evaluation and award procedures in FAR 13.106 apply. The following evaluation factors shall be considered: The Government will award a purchase order resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price, delivery date, experience and other factors considered.
FAR 52.212-3 Offeror Representations and Certifications-Commercial Items (MAR 2016) - An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically via http://www.acquisition.gov . If an offeror has not completed the annual representations and certifications electronically at the System for Award Management (SAM) website (www.sam.gov), the offeror shall complete only paragraphs (c) through (o) of this provision.
FAR 52.212-4 Contract Terms and Conditions-Commercial Items (May 2015) applies to this acquisition. The following addendum applies: Address for submission of invoices is U.S. Coast Guard, P.O. Box 4122, Chesapeake, VA 23327-4122, Phone 757-523-6940 or Email address for submission of invoices is FIN-SMB-YARDTEAM@USCG.MIL .
52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -Commercial Items (MAR 2016)
FAR 52.213-4 Terms and Conditions – Simplified Acquisitions (Other Than Commercial Item).
The Contractor shall comply with the FAR clauses which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)
(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).
(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).
(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]
___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).
___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).
___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).
X___ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).
___ (5) [Reserved]
_ _ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).
___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).
___ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).
___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).
___ (10) [Reserved]
___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).
___ (ii) Alternate I (Nov 2011) of 52.219-3.
___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).
___ (ii) Alternate I (Jan 2011) of 52.219-4.
___ (13) [Reserved]
X__ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).
___ (ii) Alternate I (Nov 2011).
___ (iii) Alternate II (Nov 2011).
___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).
___ (ii) Alternate I (Oct 1995) of 52.219-7.
___ (iii) Alternate II (Mar 2004) of 52.219-7.
___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).
___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).
___ (ii) Alternate I (Oct 2001) of 52.219-9.
___ (iii) Alternate II (Oct 2001) of 52.219-9.
___ (iv) Alternate III (Oct 2015) of 52.219-9.
X__ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).
___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).
___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).
___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).
X__ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).
___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).
___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).
X__ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
X__ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126).
X__ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).
X__ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).
___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).
X__ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).
___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).
___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).
X__ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).
___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).
_____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)
_____ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
_____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)
_____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).
_____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun2016) (E.O. 13693).
_____ (38) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).
_____ (ii) Alternate I (Oct 2015) of 52.223-13.
_____ (39) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).
_____ (ii) Alternate I (Jun 2014) of 52.223-14.
_____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).
_____ (41) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).
_____ (ii) Alternate I (Jun 2014) of 52.223-16.
_X____ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).
_____ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).
_____ (44) 52.223-21, Foams (Jun 2016) (E.O. 13693).
_____ (45) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).
_____ (ii) Alternate I (Jan 2017) of 52.224-3.
__X___ (46) 52.225-1, Buy American-Supplies (May 2014) (41 U.S.C. chapter 83).
_____ (47) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.
_____ (ii) Alternate I (May 2014) of 52.225-3.
_____ (iii) Alternate II (May 2014) of 52.225-3.
_____ (iv) Alternate III (May 2014) of 52.225-3.
_____ (48) 52.225-5, Trade Agreements (Aug 2018) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).
__X___ (49) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).
_____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).
_____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).
_____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).
_____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C.4505, 10 U.S.C.2307(f)).
_____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C.4505, 10 U.S.C.2307(f)).
___X__ (55) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018) (31 U.S.C. 3332).
__X___ (56) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C.3332).
_____ (57) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C.3332).
_____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).
_____ (59) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).
_____ (60) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).
_____ (ii) Alternate I (Apr 2003) of 52.247-64.
_____ (iii) Alternate II (Feb 2006) of 52.247-64.
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:
[Contracting Officer check as appropriate.]
_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495).
__X__ (2) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).
__X__ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
__X___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).
_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).
_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).
__X___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).
__X___ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).
_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792).
(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:_________________________________________________________
_X_52.204-7 -- System for Award Management (Jul 2013)
(a) Definitions. As used in this provision—
“Data Universal Numbering System (DUNS) number” means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.
“Data Universal Numbering System+4 (DUNS+4) number” means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional System for Award Management records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern.
“Registered in the System for Award Management (SAM) database” means that—
(1) The Offeror has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see Subpart 4.14), into the SAM database; and
(2) The offeror has completed the Core, Assertions, and Representations and Certification, and Points of contact sections of the registration in the SAM database;
(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process.
(4) The Government has marked the record “Active”.
(b)
(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.
(2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the offeror’s name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the SAM database.
(c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one.
(1) An offeror may obtain a DUNS number—
(i) Via the internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or
(ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office.
(2) The offeror should be prepared to provide the following information:
(i) Company legal business name.
(ii) Tradestyle, doing business, or other name by which your entity is commonly recognized.
(iii) Company physical street address, city, state and Zip Code.
(iv) Company mailing address, city, state and Zip Code (if separate from physical).
(v) Company telephone number.
(vi) Date the company was started.
(vii) Number of employees at your location.
(viii) Chief executive officer/key manager.
(ix) Line of business (industry).
(x) Company Headquarters name and address (reporting relationship within your entity).
(d) If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror.
(e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation.
(f) Offerors may obtain information on registration at https://www.acquisition.gov.
(End of Provision)
Alternate I (Jul 2013). As prescribed in 4.1105(a)(2), substitute the following paragraph (b)(1) for paragraph (b)(1) of the basic provision:
(b)
(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the System for Award Management prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. If registration prior to award is not possible, the awardee shall be registered in the System for Award Management within 30 days after award or before three days prior to submission of the first invoice, whichever occurs first.
X__52.213-4 -- Terms and Conditions -- Simplified Acquisitions (Other Than Commercial Items). (OCT 2015)
(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:
(1) The clauses listed below implement provisions of law or Executive order:
(i) 52.222-3, Convict Labor (June 2003) (E.O. 11755).
(ii) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).
(iii) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).
(iv) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).
(v) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).
(vi) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. L. 108-77, 108-78 (19 U.S.C. 3805 note)).
(2) Listed below are additional clauses that apply:
(i) 52.232-1, Payments (Apr 1984).
(ii) 52.232-8, Discounts for Prompt Payment (Feb 2002).
(iii) 52.232-11, Extras (Apr 1984).
(iv) 52.232-25, Prompt Payment (Jul 2013).
(v) 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013).
(vi) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013)
(vii) 52.233-1, Disputes (May 2014).
(viii) 52.244-6, Subcontracts for Commercial Items (Oct 2015).
(ix) 52.253-1, Computer Generated Forms (Jan 1991).
(b) The Contractor shall comply with the following FAR clauses, incorporated by reference, unless the circumstances do not apply:
(1) The clauses listed below implement provisions of law or Executive order:
(i) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note) (Applies to contracts valued at $30,000 or more).
(ii) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126). (Applies to contracts for supplies exceeding the micro-purchase threshold).
(iii) 52.222-20, Contracts for Materials, Supplies, Articles, and Equipment Exceeding $15,000 (May 2014) (41 U.S.C. chapter 65) (Applies to supply contracts over $15,000 in the United States, Puerto Rico, or the U.S. Virgin Islands).
(iv) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).
(v) 52.222-36, Equal Employment for Workers with Disabilities (Jul 2014) (29 U.S.C. 793) (Applies to contracts over $15,000, unless the work is to be performed outside the United States by employees recruited outside the United States.) (For purposes of this clause, “United States” includes the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island.)
(vi) 52.222-37, Employment Reports on Veterans (Oct 2015) (38 U.S.C. 4212) (Applies to contracts of $150,000 or more).
(vii) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67) (Applies to service contracts over $2,500 that are subject to the Service Contract Labor Standards statute and will be performed in the United States, District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, or the outer Continental Shelf.)
(viii)(A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627) (Applies to all solicitations and contracts).
(B) Alternate I (Mar 2015) (Applies if the Contracting Officer has filled in the following information with regard to applicable directives or notices: Document title(s), source for obtaining document(s), and contract performance location outside the United States to which the document applies).
(ix) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (Executive Order 13658) (Applies when 52.222-6 or 52.222-41 are in the contract and performance in whole or in part is in the United States (the 50 States and the District of Columbia)).
(x) 52.223-5, Pollution Prevention and Right-to-Know Information (May 2011) (E.O. 13423) (Applies to services performed on Federal facilities).
(xi) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b) (Unless exempt pursuant to 23.204, applies to contracts when energy-consuming products listed in the ENERGY STAR® Program or Federal Energy Management Program (FEMP) will be—
(A) Delivered;
(B) Acquired by the Contractor for use in performing services at a Federally-controlled facility;
(C) Furnished by the Contractor for use by the Government; or
(D) Specified in the design of a building or work, or incorporated during its construction, renovation, or maintenance).
(xii) 52.225-1, Buy American —Supplies (May 2014) (41 U.S.C. chapter 83) (Applies to contracts for supplies, and to contracts for services involving the furnishing of supplies, for use in the United States or its outlying areas, if the value of the supply contract or supply portion of a service contract exceeds the micro-purchase threshold and the acquisition--
(A) Is set aside for small business concerns; or
(B) Cannot be set aside for small business concerns (see 19.502-2), and does not exceed $25,000).
(xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792) (Applies to contracts greater than $25,000 that provide for the provision, the service, or the sale of food in the United States).
(xiv) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (Applies when the payment will be made by electronic funds transfer (EFT) and the payment office uses the System for Award Management (SAM) database as its source of EFT information.)
(xv) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (Jul 2013) (Applies when the payment will be made by EFT and the payment office does not use the SAM database as its source of EFT information.)
(xvi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. App.1241) (Applies to supplies transported by ocean vessels (except for the types of subcontracts listed at 47.504(d).)
(2) Listed below are additional clauses that may apply:
(i) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (Applies to contracts over $35,000).
(ii) 52.211-17, Delivery of Excess Quantities (Sep 1989) (Applies to fixed-price supplies).
(iii) 52.247-29, F.o.b. Origin (Feb 2006) (Applies to supplies if delivery is f.o.b. origin).
(iv) 52.247-34, F.o.b. Destination (Nov 1991) (Applies to supplies if delivery is f.o.b. destination).
Quotes with RFQ # listed in email subject line must be sent to Elizabeth Garcia at ELIZABETH.J.GARCIA@USCG.MIL.
70Z04020Q60550Y00 Department of Homeland Security US Coast Guard
12/19/19, 2:37 PM Microsoft Tablets
COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, "Streamlined Procedures for Evaluation and Solicitation for Commercial Items," as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation document will not be issued.
This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2019-06 Effective 10 Oct 2019 (updated with Class Deviation 2019-O0009)
The associated North American Industrial Classification System (NAICS) code for this procurement is 334111, with a small size standard of Small 1250.
The associated Federal Supply Code (FSC) / Product Service Code (PSC) procurement is 7010.
The Naval Research Laboratory (NRL), located in Washington, DC, is seeking to purchase Tablets.
All interested companies shall provide quotations for the following:
See Attached Inquiry of Availability
Supplies: Items must be brand name ONLY.
**FOB DESTINATION IS THE PREFERRED METHOD**
Estimated Delivery Time: __________________
For FOB ORGIN, please provide the following information:
FOB Shipping Point: _______________________
Estimated Shipping Charge: _________________
Dimensions of Package(s): ____________________
Shipping Weight: __________________________
The following provisions and clauses are hereby incorporated. Any provisions and clauses not applicable by their terms shall be self-deleting.
The full text of FAR provisions or clauses may be accessed electronically at
http://acquisition.gov/comp/far/index.html. The full text of DFARS provisions or clauses may be accessed electronically at http://farsite.hill.af.mil/vfdfara.htm.
The following solicitation provisions apply to this acquisition:
1. FAR 52.203-11, Certification & Disclosure Regarding Payments to Influence Certain Federal Transactions (Sep 2007)
2. FAR 52.204-7, System for Award Management (Oct 2018)
52.212-1 -- Instructions to Offerors -- Commercial Items. (DEVIATION 2018-O0018)
3. FAR 52.212-1, "Instructions to Offerors-Commercial Items" (Oct 2018)
a. FAR 52.212-1 has been tailored to include the following additional instructions:
• This procurement is for new equipment ONLY, unless otherwise specifically stated. No remanufactured or "gray market" items are acceptable. All equipment must be covered by the manufacturer's warranty.
• Vendor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system such that OEM warranty and service are provided and maintained by the OEM. All software licensing, warranty, and service associated with the equipment/system shall be in accordance with the OEM terms and conditions
• Offerors are required to submit documentation from the manufacturer stating that they are an authorized distributor for the specific items being procured.
4. FAR 52.212-3, "Offeror Representations and Certifications-Commercial Items" (Oct 2018)
5. FAR 52.225-18, Place of Manufacture (Aug 2018)
6. FAR 52.233-2, Service of Protest (SEP 2006)
The Contracting Officer's address is:
US Naval research Laboratory
4555 Overlook Avenue, S.W.
Code 3400
Washington, DC 20375
a. NRL also includes the following provisions that must be completed by the offeror:
1. FAR 52.209-5, Certification Regarding Responsibility Matters (OCT 2015)
2. FAR 52.222-22, Previous Contracts and Compliance Reports (FEB 1999)
3. FAR 52.222-25, Affirmative Action Compliance (APR 1984)
4. FAR 52.225-4, Buy American Act - Free Trade Agreements - Israeli Trade Act
Certificate Alternate III (MAY 2014)
Offerors must complete annual representations and certifications on-line at http://orca.bpn.gov in accordance with FAR 52.212-3, "Offerors Representations and Certifications-Commercial Items." If paragraph (j) of the provision is applicable, a written submission is required.
The following contract clauses apply to this acquisition:
1. FAR 52.212-4, "Contract Terms and Conditions-Commercial Items" (Oct 2018)
a. The following clauses are included as addenda to FAR 52.212-4:
FAR 52.202-1, Definitions (NOV 2013)
FAR 52.203-3, Gratuities (APR 1984)
FAR 52.203-6, - Restrictions on Subcontractor Sales to the Government (SEP 2006)
Alt I (OCT 1995)
FAR 52.203-12, Limitation of Payments to Influence Certain Federal Transactions
(OCT 2010)
FAR 52.203-17, Contractor Employee Whistleblower Rights and Requirement To Inform Employees of Whistleblower Rights (APR 2014)
FAR 52.204-4, Printed or Copied Double-Sided on Recycled Paper (MAY 2011)
FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards Exceeding $30,000 (OCT 2018)
FAR 52.223-2, Affirmative Procurement of Biobased Products Under Service And Construction Contracts (SEP 2013)
FAR 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016)
FAR 52.223-12, Refrigeration Equipment and Air Conditioners (JUN 2016)
FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011)
FAR 52.223-20, Aerosols (Jun 2016)
FAR 52.223-21, Foams (Jun 2016)
FAR 52.225-14, Inconsistency Between English Version and Translation of Contract
(FEB 2000)
FAR 52.232-39, Unenforceability of Unauthorized Obligations (JUN 2013)
FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors
(DEC 2013)
FAR 52.245-1, Government Property (Jan 2017)
FAR 52.245-2, Government Property Installation Operation Services (APR 2012)
FAR 52.245-9, Use and Charges (APR 2012)
FAR 52.247-34, F.O.B Destination (NOV 1991)
FAR 52.252-2, Clauses Incorporated By Reference (FEB 1998)
2. FAR 52.212-5, "Contract Terms and Conditions Required to Implement Statutes or Executive Orders" (Oct 2019)
The following subparagraphs of FAR 52.212-5 are applicable:
• Subparagraphs (b)(4), (b)(8), (b)(25 - 34), (b)(40), (b)(42), (b)(46), (b)(48) (b)(54)(56)
3. DFARS 212.301 - Solicitation Provisions and Contract Clauses for the Acquisition of Commercial Items (Revised December 21, 2018):
DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (SEP 2011)
DFARS 252.203-7003, Agency Office of the Inspector General (AUG 2019)
DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials (NOV 2011)
DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls (OCT 2016)
DFARS 252.204-7009, Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (OCT 2016)
DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (OCT 2016)
DFARS 252.204-7013, Limitations on the Use or Disclosure of Information by Litigation Support Offeror (MAY 2016)
DFARS 252.204-7014, Limitations on the Use or Disclosure of Information by Litigation Support Contractors (MAY 2016)
DFARS 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support (MAY 2016)
DFARS 252.211-7003, Item Unique Identification and Valuation (MAR 2016)
DFARS 252.211-7006, Passive Radio Frequency Identification (MAR 2018)
DFARS 252.211-7007, Reporting of Government-Furnished Property (AUG 2012)
DFARS 252.211-7008, Use of Government-Assigned Serial Numbers (SEP 2010)
DFARS 252.213-7000, Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations (MAR 2018)
DFARS 252.215-7007, Notice of Intent to Resolicit (JUN 2012)
DFARS 252.215-7008, Only One Offer (JUL 2019)
DFARS 252.219-7000, Advancing Small Business Growth (SEP 2016)
DFARS 252.223-7004 Drug-Free Work Force (SEP 1988)
DFARS 252.223-7008, Prohibition of Hexavalent Chromium (JUN 2013)
DFARS 252.225-7000, Buy American Act - Balance of Payments Program Certificate – Basic (NOV 2014)
Alternate I (NOV 2014)
DFARS 252.225-7001, Buy American Act and Balance of Payments Program – Basic
(DEC 2017)
DFARS 252.225-7006, Acquisition of the American Flag (AUG 2015)
DFARS 252.225-7008, Restriction on Acquisition of Specialty Metals (MAR 2013)
DFARS 252.225-7013, Duty-Free Entry (MAY 2016)
DFARS 252.225-7016, Restriction on Acquisition of Ball and Roller Bearings (JUN 2011)
DFARS 252.225-7036, Buy American Act-Free Trade Agreements-Balance of Payments Program – Basic (DEC 2017) Exceeding $25,000, but is Less Than $191,000
DFARS 252.225-7037, Evaluation of Offers for Air Circuit Breakers (DEC 2018)
DFARS 252.225-7038, Restriction on Acquisition of Air Circuit Breakers (DEC 2018)
DFARS 252.225-7049, Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities—Representations (DEC 2018)
DFARS 252.227-7013, Rights in Technical Data - Noncommercial Items (FEB 2014)
Alternate I (JUN 1995)
DFARS 252.227-7015, Technical Data - Commercial Items (FEB 2014)
DFARS 252.227-7037, Validation of Restrictive Markings on Technical Data (SEP 2016)
DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (DEC 2018)
DFARS 252.232-7006, Wide Area WorkFlow Payment Instructions (DEC 2018)
DFARS 252.232-7010, Levies on Contract Payments (DEC 2006)
DFARS 252.232-7011, Payments in Support of Emergencies and Contingency Operations (MAY 2013)
DFARS 252.237-7010, Prohibition on Interrogation of Detainees by Contractor Personnel (JUN 2013)
DFARS 252.237-7019, Training for Contractor Personnel Interacting with Detainees
(JUN 2013)
DFARS 252.239-7009, Representation of Use of Cloud Computing (SEP 2015)
DFARS 252.239-7010, Cloud Computing Services (OCT 2016)
DFARS 252.239-7017, Notice of Supply Chain Risk (FEB 2019)
DFARS 252.239-7018, Supply Chain Risk (FEB 2019)
DFARS 252.244-7000, Subcontracts for Commercial Items (JUN 2013)
DFARS 252.246-7003, Notification of Potential Safety Issues (JUN 2013)
DFARS 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations (OCT 2010)
5237.102-90 Enterprise-wide Contractor Manpower Reporting Application (ECMRA).
(a) DOD contracting activities awarding or administering contracts shall incorporate the following Enterprise-wide Contractor Manpower Reporting Application (ECMRA) standard language into all contracts which include services, provided the organization that is receiving or benefiting from the contracted service is a Department of Defense organization, including reimbursable appropriated funding sources from non-DOD executive agencies where the Defense Component requiring activity is the executive agent for the function performed. The reporting requirement does not apply to situations where a Defense Component is merely a contracting agent for another executive agency. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:
(1) W, Lease/Rental of Equipment;
(2) X, Lease/Rental of Facilities;
(3) Y, Construction of Structures and Facilities;
(4) D, Automatic Data Processing and Telecommunications, IT and Telecom- Telecommunications Transmission (D304) and Internet (D322) ONLY;
(5) S, Utilities ONLY;
(6) V, Freight and Shipping ONLY.
(b)The standard language to be inserted is:
“The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the [NAMED COMPONENT] via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:
(1) W, Lease/Rental of Equipment;
(2) X, Lease/Rental of Facilities;
(3) Y, Construction of Structures and Facilities;
(4) D, Automatic Data Processing and Telecommunications, IT and Telecom- Telecommunications Transmission (D304) and Internet (D322) ONLY;
(5) S, Utilities ONLY;
(6) V, Freight and Shipping ONLY.
The contractor is required to completely fill in all required data fields using the following web address:
https://www.ecmra.mil.
Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at
https://www.ecmra.mil.
SUBMISSION INSTRUCTIONS:
All Quoters shall submit 1 (one) copy of their technical and price quote. Include your company DUNS Number and Cage Code on your quote.
All quotations shall be sent via e-mail.
Buyer Name: Kimberly Martin, email: Kimberly.Martin@nrl.navy.mil.
Please reference this combined synopsis/solicitation number on your correspondence and in the "Subject" line of your email.
ALL QUESTIONS REGARDING THE SOLICITATION SHALL BE SUBMITTED VIA EMAIL.
The government intends to award a purchase order as a result of this combined synopsis/solicitation that will include the terms and conditions set forth herein.
SAM Registration: Award may be made without discussions or negotiations, therefore prospective contractors should have an active registration in the System for Award Management (SAM) database (www.sam.gov) in accordance with Federal Acquisition Regulation (FAR) Part 4.1102 and Part 52.204-7 when submitting a response to this solicitation.
The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factor shall be used to evaluate offers:
Lowest Price Technically Acceptable –
Factor 1 – Price. Quotes will be evaluated to determine if the price is fair, and reasonable in accordance with FAR 12.209. Quotations shall include a price for each Contract Line Item Number (CLIN).
Factor 2 – Technical. The Government will evaluate the quoter’s capabilities to provide supplies/services in accordance with the Solicitation.
Offers will be ranked lowest to highest according to price. A price analysis will be conducted to determine whether the lowest price will result from a single award or multiple awards. Based on the price analysis, the lowest price offer or multiple offers, will be forwarded to the requiring activity for technical evaluation (offer(s), in accordance with the specifications, will be deemed either technically acceptable or technically unacceptable). If the lowest price offer or offers is found technically acceptable and the pricing determined fair and reasonable by the Contracting Officer, evaluation will be deemed complete and award will be made based on the lowest price offer(s)
Table A-1. Technical Acceptable/Unacceptable Ratings
Rating
Description
Acceptable
Quote meets all the minimum requirements/specifications as stated or provided in the RFQ specifications.
Unacceptable
Quote does not clearly meet the minimum requirements/specifications as stated or provided in the RFQ specifications.
Options. When applicable, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).
To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows:
"The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition."
OR
"The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:"
Quoter shall list exception(s) and rationale for the exception(s).
Submission shall be received not later than the response date listed above. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). E-mailed submissions are accepted and are the preferred form of submission. Receipt will be verified by the date/time stamp on fax or e-mail.
N00173-20-Q-0020 Department of the Navy Secretary of the Navy Office of Naval Research
11/14/19, 1:39 PM