Pressure Sensitive Adhesive Roll Labels
Added: Jul 25, 2016 10:32 am This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is NAMA-16-Q-0026 and is issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Circular 2005-89 effective July 14, 2016. This is an unrestricted acquisition under NAICS 323111, Commercial Printing (Except Screen and Books). CONTRACT LINE ITEM NUMBER(S): See Attachment 1, Schedule of Prices. REQUIREMENT: The National Archives and Records Administration (NARA) has a requirement for Pressure Sensitive Adhesive Roll Labels. See Attachment 2, Specifications, and Attachment 3, Shipping Destinations. PERIOD OF PERFORMANCE: The period of performance will consist of a base year and four (4) option years. The following Federal Acquisition Regulation (FAR) clauses are incorporated and are to remain in full force in any resultant contract, with the exception of FAR provisions which will be removed prior to award: FAR provision 52.212-1. Instructions to Offerors - Commercial Items (Oct 2015). Addenda: Delete paragraph (h), Multiple Awards. - see below for additional quotation submission instructions. EVALUATION (In lieu of FAR provision 52.212-2): Evaluation and award will be in accordance with Simplified Acquisition Procedures at FAR Subpart 13.106, Soliciting Competition, Evaluation of Quotations or Offers, Award and Documentation authorized by FAR Subpart 13.5, Simplified Procedures for Certain Commercial Items as prescribed by FAR 12.301(c)(2). Selection of the Contractor to perform this contract will be based on NARA's assessment of the best overall value to the Government. Accordingly, best value for this contract will be obtained tough a lowest price technically acceptable evaluation. Exceptions taken to any terms and conditions stated in the RFQ must be clearly outlined on a separate page of the Contractor's quotation entitled "Exceptions." Exceptions may render a Contractor's quotation technically unacceptable for award. The Contractor must also include complete rationale, justification, and the cost impact of each exception noted. The Government reserves the right to make an award on the initial quotation without discussions of this procurement. For evaluation purposes, the total contract ceiling price will be used to determine the lowest price. The Total Ceiling Price for each not-to-exceed CLIN will be determined by multiplying the Maximum Quantity by the Firm-Fixed Unit Price. The evaluated Total Contract Ceiling Price will be determined by summing the Total Ceiling Price of all performance years (base year and all option years). Contractors must provide pricing (USD) for each CLIN. FOB destination pricing is required. Attachment 6, RFQ Information Sheet, must be submitted with quotations. Failure to submit any of the required information and documentation with the quotation may result in rejection of the quotation. FAR provision 52.217-5, Evaluation of Options (Jul 1990). FAR provision 52.212-3, Offeror Representations and Certifications - Commercial Items (Apr 2016) - The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed tough http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) tough (r) of this provision. FAR clause 52.212-4, Contract Terms and Conditions - Commercial Items (May 2015) - see Attachment 4, Additional NARA Terms and Conditions (Addenda to FAR clause 52.212-4). FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Jun 2016) - see Attachment 5, FAR Clauses for the full text of this clause and for additional applicable FAR clauses. Full text provisions and clauses can be found at https://www.acquisition.gov. QUESTIONS: Questions regarding this RFQ must be submitted in writing to the Contract Specialist, Ms. Cynthia Jones, at cynthia.jones@nara.gov no later than 12:00 PM ET on August 12, 2016 to be considered. Questions submitted in any other manner will not be answered. The Government will answer questions or requests for clarification via a written RFQ amendment. QUOTATION DUE DATE: Quotations must be received by 12:00 PM ET on September 6, 2016. Failure to submit quotations by the due date and time may result in rejection of the quotation as untimely. Contractors submitting via e-mail are cautioned to allow one extra business day for delivery and confirm receipt of quotation as the e-mail will need to pass tough IT security. QUOTATION SUBMISSION INSTRUCTIONS: NARA requests that contractors email one (1) copy of the quotation to: cynthia.jones@nara.gov. However, contractors may mail one (1) hardcopy and one (1) CD of each quotation. Mailed quotations must be sent to: National Archives and Records Administration, Attention: Ms. Cynthia Jones, 8601 Adelphi Road, Room 3400, College Park, MD 20740-6001. ATTACHMENT 1SCHEDULE OF PRICESBase Year - Months 1 - 12 CLIN DESCRIPTION MINQTY MAXQTY UNIT FIRM FIXEDUNITPRICE TOTAL CEILINGPRICE0001 Roll Labels 2" x 0.5", 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll 10 75 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0002 Roll Labels 3.75" x 2.375", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 2,500 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0003 Roll Labels 3.75" x 3.35", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0004 Roll Labels 3.75" x 1", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0005 One time die charge for four sizes (if charged separately) --- 1 Lot tiny_mce_marker_____ tiny_mce_marker_____0006 ReserveTOTAL BASE YEAR CONTRACT CEILING PRICE: tiny_mce_marker________ OPTION YEAR I - Months 13-24 CLIN DESCRIPTION MINQTY MAXQTY UNIT FIRM FIXEDUNITPRICE TOTAL CEILINGPRICE0007 Roll Labels 2" x 0.5", 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll 10 75 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0008 Roll Labels 3.75" x 2.375", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 2,500 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0009 Roll Labels 3.75" x 3.35", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0010 Roll Labels 3.75" x 1", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0011 ReserveTOTAL OPTION YEAR I CONTRACT CEILING PRICE: tiny_mce_marker________ OPTION YEAR II- Months 25-36 CLIN DESCRIPTION MINQTY MAXQTY UNIT FIRM FIXEDUNITPRICE TOTAL CEILINGPRICE0012 Roll Labels 2" x 0.5", 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll 10 75 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0013 Roll Labels 3.75" x 2.375", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 2,500 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0014 Roll Labels 3.75" x 3.35", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0015 Roll Labels 3.75" x 1", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0016 ReserveTOTAL OPTION YEAR II CONTRACT CEILING PRICE: tiny_mce_marker_________ OPTION YEAR III - Months 37-48 CLIN DESCRIPTION MINQTY MAXQTY UNIT FIRM FIXEDUNITPRICE TOTAL CEILINGPRICE0017 Roll Labels 2" x .5", 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll 10 75 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0018 Roll Labels 3.75" x 2.375", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 2,500 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0019 Roll Labels 3.75" x 3.35", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0020 Roll Labels 3.75" x 1", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0021 ReserveTOTAL OPTION YEAR III CONTRACT CEILING PRICE: tiny_mce_marker________ OPTION YEAR IV - Months 49-60 CLIN DESCRIPTION MINQTY MAXQTY UNIT FIRM FIXEDUNITPRICE TOTAL CEILING PRICE0022 Roll Labels 2" x .5", 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll 10 75 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0023 Roll Labels 3.75" x 2.375", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 2,500 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0024 Roll Labels 3.75" x 3.35", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0025 Roll Labels 3.75" x 1", 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll 10 200 roll tiny_mce_marker_____ tiny_mce_marker______Not to Exceed Price0026 ReserveTOTAL OPTION YEAR IV CONTRACT CEILING PRICE: tiny_mce_marker_________TOTAL CONTRACT CEILING PRICE: tiny_mce_marker__________ ATTACHMENT 2Specification for Pressure Sensitive Adhesive Label Stock for Application to Metal Storage Furniture and Metal, Plastic, Paper, or Boxboard Housings for Thermal Transfer PrintersI. ScopeThermal Transfer Printable Label Material for application to housing substrates, including plastic, paper, box-board, or metal, as well as metal shelving.Applications: Barcode or other labels affixed to metal, plastic, paper, or box-board substrates for housing and storage.II. RequirementsThe National Archives and Records Administration (NARA) requires pressure sensitive adhesive roll labels for use in thermal transfer printers for application to housing substrates, including plastic, paper, box-board, or metal, as well as metal shelving.1. Dimensions: The labels will be required in the following dimensions:2" x 0.5" labels, 3" core and 8.38 OD, 0.1875" label gap (0.625" repeat) with perforation between labels, 10,000 per roll.3.75" x 2.375" labels, 3" core and 8.38 OD, .1875" or 0.125" label gap with perforation between labels, 2,500 per roll.3.75" x 3.35" labels, 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 1,700 per roll.3.75" x 1" labels, 3" core and 8.38 OD, 0.1875" or 0.125" label gap with perforation between labels, 5,000 per roll.2. Composition: The face-stock material must be a polypropylene substrate bearing an acrylic polymer adhesive with polyester release liner.A. Face-Stock Options Polypropylene: White opaque film, 1-2 mil thick, biaxial orientation preferred. The polypropylene must not contain plasticizers.B. AdhesiveThe pressure-sensitive adhesive layer must possess high permanence characteristics such that labels, once applied, remain attached permanently and can be removed only with difficulty. The adhesive must be clearly identifiable as an acrylic polymer or copolymer by its infrared spectrum. 3. Bond Strength: The adhesive must exhibit sufficient bond strength for the label to support a test weight of 200 grams for 10 minutes for a sample of 1 by 2.5 inches. The test procedure is a 90-degree peel test modified from ASTM D2860/D2860M-04, Procedure B, in which the test substrate is metal, plastic, paper, and paper board.4. Other Label Properties: A. The label face-stock should provide a proper surface characteristics, so must be able to accept and retain a clean, legible, abrasion-resistant image with good ink adhesion from qualified thermal transfer printers and ink-ribbons. B. The label stock must be compatible with hard-resin thermal transfer ink ribbons; wax or wax-resin ribbons are not acceptable. C. The release liner must allow for easy and complete peeling of the face-stock without shearing of the adhesive layer.D. The label stock must not emit odors deemed detrimental to the work and/or storage environment in NARA according to TAPPI T483.5. Workmanship A. The label sheet must lie flat without any curling, and permit problem-free self-feeding from a stacking paper tray. B. All label edges will be cut square and clean, and of the appropriate size(s) specified.III. RESPONSIBILITY FOR TESTSThe Contractor is responsible for quality control to ensure the specifications of this contract are met. The Contractor shall provide test results to the Contract Specialist (CS) and/or Contracting Officer (CO), for each production lot used to provide supplies under this contract. The test results shall display, at a minimum, the characteristics listed below and shall be provided at least 30 days prior to shipping any items from the production lot under this contract. The Contractor may use its own facilities or any commercial laboratory certified to run quality assurance test methods listed below. NARA reserves the right to perform quality assurance at any time during the contract where such tests are deemed necessary to assure that supplies and services conform to the specifications. Therefore, the test results and ten samples of each label size purchased shall be sent to the CS within 14 days after award of the contract. Additionally, the Contractor shall provide a sample of a new production lot at any time, upon request of the Government. Table of QC Test Items and SpecificationsTest Items Spec. Targets Notes(test methods, test conditions, etc.)Composition Polypropylene films, with acrylic adhesive FTIRAdhesive Bond Strength Sample of 1 by 2.5 in will support 200 g for 10 minIn a 90° Peel Test ASTM D2860/D2860M-04, Procedure BNo off-gassing/odors PASS TAPPI T-483IV. PACKAGING AND IDENTIFICATIONPackaging. The label rolls must be packed in a standard commercial container and sealed with tape. Labels must arrive undamaged, with no tears, wrinkles or folds.Marking. The outside of each packing container must be legibly marked with the following information: the delivery order number and the number of rolls packed in the container. ATTACHMENT 3SHIPPING DESTINATIONSDeliveries may be made to all NARA Sites and the shipping destinations are below. All Delivery Orders will include a NARA Point of Contact (POC).PRIMARY DESTINATIONS PRIMARY DESTINATIONSNational Archives at College Park3301 Metzerott RoadCollege Park, MD 20740Delivery Hours: Mon-Fri 9:00 AM-3:00 PM National Archives BuildingLoading Dock7th & Pennsylvania Ave., (R)Washington, DC 20408 (see Note 1)Delivery Hours: Mon-Fri 9:00 AM-3:00 PMNational Archives at Waltham380 Trapelo RoadWaltham, MA 02154Delivery Hours: Mon-Fri 9:30 AM-2:30 PM National Archives at New York1 Bowling GreenNew York, NY 10004 (see Note 2)Delivery Hours: Mon-Fri 9:30 AM-2:30 PMJohn F. Kennedy LibraryColumbia PointAbilene, KS 67410Delivery Hours: Mon-Fri. 9:30 AM-2:30 PM Franklin D. Roosevelt Library4079 Albany Post RoadHyde Park, NY 12538Delivery Hours: Mon-Fri. 9:30 AM-2:30 PMNational Archives at Philadelphia14700 Townsend Road Philadelphia, PA 19154-1025Delivery Hours: Mon-Fri 9:30 AM-2:30 PM National Archives at Atlanta5780 Jonesboro RoadMorrow, GA 30260-3087Delivery Hours: Mon-Fri 9:30 AM-2:30 PMJimmy Carter Library441 Freedom ParkwayAtlanta, GA 30307Delivery Hours: Mon-Fri. 9:30 AM-2:30 PM Gerald R. Ford LibraryLibrary: 1000 Beal AvenueAnn Arbor, MI 48109Delivery Hours: Mon-Fri. 9:30 AM-2:30 PMHerbert Hoover Library210 Parkside DriveWest Branch, IA 52358Delivery Hours: Mon-Fri. 9:30 AM-2:30 PM National Archives at Chicago7358 South Pulaski RoadChicago, IL 60629Delivery Hours: Mon-Fri 9:30 AM-2:30 PMDwight D Eisenhower Library200 Southeast Fourth StreetAbilene, KS 67410Delivery Hours: Mon-Fri. 9:30 AM-2:30 PM National Archives at Denver17101 Huron StreetBroomfield, CO 80023-8909Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNational Personnel Records CenterArchival Operations - St. Louis1 Archives DriveSt Louis, MO 63138Delivery Hours: Mon-Fri 9:30 AM-2:30 PM Kansas City Federal Records Center8600 NE Underground DrivePillar 300-GKansas City, MO 64161Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNational Archives at Kansas City400 West Pershing DriveKansas City, MO 64108Delivery Hours: Mon-Fri 9:30 AM-2:30 PM William J. Clinton Library1200 President Clinton AvenueLittle Rock, AR 72201Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNational Archives at Fort Worth1400 John Burgess DriveFort Worth, TX 76140Delivery Hours: Mon-Fri 9:30 AM-2:30 PM George Bush Library1000 George Bush Drive WestCollege Station, TX 77845Delivery Hours: Mon-Fri 9:30 AM-2:30 PMLyndon Baines Johnson Library2313 Red River StreetAustin, TX 78705Delivery Hours: Mon-Fri 9:30 AM-2:30 PM George W. Bush Library2943 SMU BoulevardDallas, TX 75205Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNational Archives at Seattle6125 Sand Point Way, NESeattle, WA 98115Delivery Hours: Mon-Fri 9:30 AM-2:30 PM National Archives at San Bruno1000 Commodore DriveSan Bruno CA 94066Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNational Archives at Riverside23123 Cajalco RoadPerris CA 92570Delivery Hours: Mon-Fri 9:30 AM-2:30 PM Ronald Reagan Library40 Presidential DriveSimi Valley, CA 93065Delivery Hours: Mon-Fri 9:30 AM-2:30 PMRichard Nixon Library18001 Yorba Linda BoulevardYorba Linda, CA 92886Delivery Hours: Mon-Fri 9:30 AM-2:30 PMNOTES TO CONTRACTOR:1. At Delivery Location: National Archives - 7th & Pennsylvania Ave., NW Washington DC, low boy trailers cannot get into garage.2. At Delivery Location: National Archives New York - 1 Bowling Green, New York, NY 10004, trailers cannot exceed 12 feet - six inches in height. Twenty-four-hour advance notice, prior to delivery, is required. ATTACHMENT 4ADDITIONAL NARA TERMS AND CONDITIONS (Addenda to FAR Clause 52.212-4)I. GOVERNMENT CONTRACT ADMINISTRATIONA. This contract will be administered by:National Archives and Records AdministrationAcquisitions Branch, Code BCN8601 Adelphi Road, Room 3340College Park, MD 20740-6001B. Contract Specialist (CS):Cynthia Jones Telephone: 301-837-1860Email: cynthia.jones@nara.govThe Contracting Officer (CO) has the overall responsibility for the administration of this contract. Written communication to the Contract Specialist (CS) must make reference to the contract number and must be emailed or mailed with postage prepaid, to the above address.C. Contracting Officer (CO):Any BCN Warranted COThe CO alone, without delegation, is authorized to take actions on behalf of the Government to amend, modify, or deviate from the contract terms, conditions, requirements, specifications, details and/or delivery schedules; make final decisions on disputed deductions from contract payments for non-performance or unsatisfactory performance; terminate the contract for convenience or default; and issue final decisions regarding contract questions or matters under dispute. However, the CO may delegate certain other responsibilities to authorized representatives.D. NARA POINT OF CONTACT (POC)POC: TBDTelephone:Email: II. INVOICE SUBMISSION REQUIREMENTSA. The preferred method for invoicing is tough the Invoice Processing Platform (IPP) which is a secure web-based electronic invoicing and payment information system. This service is provided by the U.S. Treasury's Bureau of the Fiscal Service free of charge to federal agencies and contractors. IPP allows contractors to view information regarding their contracts and orders, electronically submit invoices and view payment information.B. The IPP website address is https://www.ipp.gov. Contractors can obtain enrollment assistance by contacting the Fiscal Service Accounts Payable Help Desk via e-mail at AccountsPayable@fiscal.treasury.gov or by phone at 304-480-8000, Option 7.C. Contractors that are not able to utilize the IPP system for submitting payment requests may submit invoices electronically by e-mail to AccountsPayable@fiscal.treasury.gov. Microsoft Excel, Adobe Acrobat Portable Document Format (PDF) and Microsoft Word are acceptable formats.D. Invoices for services shall be submitted monthly unless otherwise stated elsewhere in the contract.E. For invoice and payment questions call the Fiscal Service AP Help Desk at 304-480-8000, Option 7.III. DELIVERYDelivery times will be as established in the delivery orders but shall not be sooner than 45 calendar days after receipt of order. Delivery must be made during regular business hours unless mutually agreed upon by NARA and the Contractor. Delivery must be made as ordered, in the specific quantities, to the specified destinations.Items will be shipped FOB Destination to all NARA sites as shown on Delivery Orders. The Contractor shall be responsible for risk of loss and any damages to items during shipment (see FAR 52.212-4(j)). ATTACHMENT 5FAR ClausesI. FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items (JUN 2016)(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) [Reserved].__ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C). __ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C). __ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). __ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313). __ (10) [Reserved].__ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a). __ (ii) Alternate I (Nov 2011) of 52.219-3. __ (12)(i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (ii) Alternate I (JAN 2011) of 52.219-4. __ (13) [Reserved]__ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644). __ (ii) Alternate I (Nov 2011).__ (iii) Alternate II (Nov 2011).__ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. __ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)). __ (17)(i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. __ (iv) Alternate III (Oct 2015) of 52.219-9. __ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)). __ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)). __ (20) 52.219-16, Liquidated Damages-Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657 f). _X_ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)). __ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)). __ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)). _X_ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). _X_ (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126). _X_ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). _X_ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). _X_ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015)(38 U.S.C. 4212). __ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). _X_ (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212). _X_ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). __ (33)(i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). __ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627). __ (34) 52.222-54, Employment Eligibility Verification (OCT 2015). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (36)(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Oct 2015) of 52.223-13. __ (37)(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun 2014) of 52.223-14. __ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). __ (39)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514). __ (ii) Alternate I (Jun 2014) of 52.223-16. _X_ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513). __ (41) 52.225-1, Buy American-Supplies (May 2014) (41 U.S.C. chapter 83). __ (42)(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43. __ (ii) Alternate I (May 2014) of 52.225-3. __ (iii) Alternate II (May 2014) of 52.225-3. __ (iv) Alternate III (May 2014) of 52.225-3. __ (43) 52.225-5, Trade Agreements (FEB 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). _X_ (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). __ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). __ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)). _X_ (50) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) (31 U.S.C. 3332). __ (51) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332). __ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332). __ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). __ (54)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64.(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:__ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014)(E.O. 13495). __ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67). __ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67). __ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67). __ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67). __ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Mar 2016). __ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). __ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)).(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition teshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.(e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509). (ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17. (iv) 52.222-21, Prohibition of Segregated Facilities (Apr 2015) (v) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). (vi) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212). (vii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). (viii) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212) (ix) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40. (x) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67). (xi) __(A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O 13627). __(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O 13627). (xii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67). (xiii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67). (xiv) 52.222-54, Employment Eligibility Verification (OCT 2015) (E.O. 12989). (xv) 52.222-55, Minimum Wages Under Executive Order 13658 (Mar 2016). (xvi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note). (xvii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xviii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.II. FAR 52.216-18 Ordering (Oct 1995)(a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders by a NARA Contracting Officer. Such orders may be issued from date of award tough 12 months after date of award (and upon exercise of an option, the period applicable to that option).(b) All delivery orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or delivery order and this contract, the contract shall control.(c) If mailed, a delivery order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule.III. FAR 52.216-19 Order Limitations (Oct 1995)a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $300.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.(b) Maximum order. The Contractor is not obligated to honor --(1) Any order for a single item in excess of $20,000.00;(2) Any order for a combination of items in excess of $75,000; or(3) A series of orders from the same ordering office within 7 days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 30 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.IV. FAR 52.216-22 Indefinite Quantity (Oct 1995)(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 61 months from the date of award.V. FAR 52.217-8 Option to Extend Services (Nov 1999)The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 days. VI. FAR 52.217-9 Option to Extend the Term of the Contract (Mar 2000)(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days prior to expiration; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 days before the contract expires. The preliminary notice does not commit the Government to an extension.(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years. Attachment 6RFQ Information SheetFailure to provide the TAA Country of Production (if applicable) will result in no further consideration of the quotation. Vendors must complete all applicable information on this sheet and submit it with the quotation. Failure to do so will render the quotation unacceptable for receipt of the order.Statutory/Regulatory ComplianceTRADE AGREEMENT ACT COUNTRY OF PRODUCTION: ____________ENERGY STAR® OR FEDERAL ENERGY MANAGEMENT PROGRAM (FEMP) ENERGY USEREQUIREMENT COMPLIANCE, AS REQUIRED: YES_____ or NO_____IPv6 COMPLIANT: YES____ or NO_____SECTION 508 COMPLIANT: YES_____ or NO____Specific Terms, Conditions, and Administrative informationPAYMENT TERMS: _________________________________________________ DELIVERY DATE: _____________________________________________________ NAME AND ADDRESS OF QUOTER: _______________________________________________________________________TELEPHONE NO (INCLUDE AREA CODE): __________________________FAX NUMBER: ___________________________ E-MAIL ADDRESS: _____________________________________ ENROLLED IN SYSTEM FOR AWARD MANAGEMENT? Yes____ No____CAGE CODE NUMBER: _____________________________________DUNS: _______________________________________Vendor Certification: [By signing the Vendor acknowledges that the information provided in response to this RFQ is correct.]NAME AND TITLE OF SIGNER: __________________________________DATE OF QUOTATION: ___________________________________SIGNATURE OF PERSON AUTHORIZED TO SIGN: ______________________________
NAMA-16-Q-0026 National Archives and Records Administration
7/25/16, 10:32 AM