Roof Replacement – Various Locations
Open State & local contract opportunity Posted
- Solicitation number
- 615
- State
- New Jersey
- Responses due
Opportunity facts
- Jurisdiction
Opportunity details come from constructionbidsource.com. Updated .
About this opportunity
Camden County Municipal Utilities Authority is requesting sealed bids for roof replacement work at various locations under Contract 615, with bids due December 3, 2026 at 10:00 a.m. at the CCMUA office, 1645 Ferry Avenue, Camden, New Jersey. A non-mandatory pre-bid meeting is scheduled for October 30, 2026 at 10:00 a.m. via Zoom; site visits are available by appointment through the Director of Engineering, Oleg Zonis.
The scope encompasses roof insulation repairs at the Sludge Drying Facility (Areas A and B, including bridge to Thickening/Dewatering Building) using tapered board type B insulation at R-19 thermal conductivity; vehicle service garage roof replacement; and maintenance warehouse roof replacement. The installer must be skilled and experienced in the specified insulation type and must comply with ASTM standards for compressive strength, thermal transmission, water vapor transmission, and thermal conductivity; UL Construction No. 1 roof deck construction ratings; Factory Mutual "Class I" construction requirements; Local Fire Prevention and Building Code; and applicable fire resistance ratings. The contract is structured as lump sum pricing across seven line items: mobilization, bonds and insurances, roof demolition, roofing insulation repairs, vehicle service garage roof, maintenance warehouse roof, and a $50,000 allowance for miscellaneous general construction work.
All bidders must comply with New Jersey prevailing wage requirements, provide Public Works Contractor Registration proof, submit business registration certificates, complete non-collusion and affirmative action affidavits, and submit equal employment opportunity and debarred list certifications. Bid security must equal 10 percent of maximum bid price but not exceed $20,000, along with a Consent of Surety form. Performance and payment bonds are required. The contract is subject to the New Jersey Local Public Contracts Law and liquidated damages provisions.
Opportunity text
Scope: 1. Contractor shall furnish all labor, materials, equipment and incidentals required to provide roof insulation as shown and specified. 2. The extent of roof insulation work is shown on the Drawings and includes Areas A and B of the Sludge Drying Facility, including bridge to Thickening/Dewatering Building. 3. The type of roof insulation required is the tapered board type B. Coordination: Review installation procedures under other Sections and coordinate the installation of items that must be installed with the insulation. C. Related Sections: Refer to the following sections for related work: 1. Section 07 21 00, Building Insulation. 2. Section 07 53 23, EPDM Roofing. 3. Section 07 72 00, Roof Accessories 1.02 QUALITY ASSURANCE A. Installer Qualifications: The installer shall be skilled and experienced in the type of roof insulation required, and equipped to perform workmanship in accordance with recognized standards. B. Design Criteria: The thicknesses shown are for a thermal conductivity of R-19. C. Requirements of Regulatory Agencies: Comply with fire resistance ratings as shown, and as required by governing authorities and codes, and comply with the following roof insulation requirements: 1. Local Fire Prevention and Building Code. 2. U.L. requirements for Roof Deck Construction which are rated UL Construction No. 1. 3. Factory mutual requirements for "Class I" construction for fire hazard and wind resistance. D. Reference Standards: Comply with applicable provisions and recommendations of following, except as otherwise shown or specified. 1. ASTM C 165, Compressive Strength of Preformed Block type Thermal Insulation. 07 22 00-2 ROOF INSULATION CONTRACT 615\SPECIFICATIONS\07 22 00 ROOF INSULATION.DOC 2. ASTM C 177, Steady-State Thermal Transmission Properties by Means of the Guarded Hot Plate. 3. ASTM C 355, Water Vapor Transmission of Thick Materials. 4. ASTM C 518, Thermal Conductivity of Materials by Means of Heat Flow Meter. 5. ASTM D 61, Primer for Use with Asphalt in Damp-proofing and Waterproofing. 6. ASTM E 84, Surface Burning Characteristics of Building Materials. 7. Federal Specification, HH-1-529B, Insulation Board, Thermal (Mineral) Aggregate. 8. Factory Mutual Publication, Loss Prevention Data 1-28. 9. Factory Mutual Publication, Approval Guide, latest Edition, (at signing of Contract). 1.03 SUBMITTALS A. Shop Drawings: Submit under provisions of Section 01 33 00 and submit for approval copies of the following: 1. Manufacturer's specifications and installation instructions for each type of insulation required. Include data substantiating that the materials comply with specified requirements. 2. Weights of all equipment to be used on roof. 3. Copies of written guarantee, as specified
Files
| File | Type | Posted |
|---|---|---|
| camden Contract 615 - Roof Replacement - Specifications.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity