RFB-32-27 DMA - Danville RC Exterior Repairs

The Commonwealth of Kentucky Department for Facilities and Support Services, Division of Engineering and Contract Administration, is requesting bids on exterior masonry repairs at the Danville Readiness Center (National Guard Armory) under RFB-32-27 DMA (solicitation RFB 785 2700000001), with bids due July 28, 2026 at 1:30 p.m. Eastern Time. A mandatory site visit is scheduled for July 13, 2026 at 10:00 a.m. at 482 Stanford Avenue, Danville, Kentucky.

The scope encompasses exterior masonry repairs to the building facade, including repairs to spalled, missing, and damaged brick; cracked, missing, and deteriorated mortar joints; vertical, lateral, and step cracking in masonry; damaged concrete at foundations and windowsills; and removal and replacement of unmatched brick. Addendum No. 1, dated July 21, 2026, expands the scope to require contractors to protect in place, provide temporary support, or remove and reinstall all existing appurtenances including conduit, supports, light fixtures, cameras, louvers, exhaust fans, and vents. Licensed electrician labor is required where electrical equipment or systems require removal or disconnection, with all equipment reinstalled to original operating condition. The addendum also mandates removal and replacement of sealant at all existing wall penetrations and at all lintels where masonry repairs occur to restore weather-tight conditions. All associated labor, equipment, materials, and coordination costs must be included in the bid with no additional compensation provided.

The architect of record is Kesler Simpson Architects, LLC in Lexington, Kentucky. Bids must be submitted exclusively through the Commonwealth's eProcurement system by registered Vendor Self Service (VSS) users. Project documents are available at no cost through https://www.stateofkyplanroom.com; contractors not registered as planholders will not receive addenda. The public bid reading will occur via conference call at 3:00 p.m. Eastern Time on the bid opening date.