Provide Maintenance and Service of Handicapped Lifts
Open State & local contract opportunity Posted
- Solicitation number
- 26-211-R
- State
- New Jersey
- Responses due
Opportunity facts
- Jurisdiction
- Point of contact
-
- Joe Carey jcarey@admin.essexcountynj.org (973) 621-3686
Opportunity details come from constructionbidsource.com. Updated .
About this opportunity
Essex County Department of Public Works is soliciting sealed bids for preventative maintenance, inspection, testing, and repair of eight handicapped lifts at three county facilities, with bids due November 17, 2026 at 11:00 a.m. The procurement carries no set-aside, preference, or sole-source designation in the source.
The work covers three Garaventa chair/stair lifts and five platform lifts (Concord PAL and TL Shield models) at the Hall of Records, Historic Court House, and Veterans Court House. Preventative maintenance follows federal, state, and county codes and covers drive systems, electrical components, tubes, rails, towers, platforms, and safety devices, with unsafe findings reported to the County Designee. Repairs and work outside the preventative contract draw on a $25,000 allowance. Routine service runs Monday through Friday, 8:00 a.m. to 4:00 p.m., with emergency 24/7 availability and a two-hour response time when required.
Bidders must provide three references for similar projects and at least five years of lift maintenance experience. Personnel must hold valid licenses, pass criminal background checks, wear County-issued identification, and be U.S. legal residents with working knowledge of English. Vendors must carry $1 million general liability per occurrence and assume liability for negligent damage to County property. Work must comply with New Jersey prevailing wage requirements and the Americans with Disabilities Act.
Pricing requires quarterly preventative maintenance rates for both chair and platform lifts, separate hourly rates for supervisors, mechanics, mechanic and helper teams, and helpers, flat-rate service call fees, and parts and material discounts. Submissions must include a sealed bid (one original and two copies) with non-collusion affidavit, disclosure statement, business registration certificate, equal employment opportunity documentation, hold harmless agreement, and affirmative action forms.
The contract term runs January 1, 2027 through December 31, 2028, a 24-month base period, with the County reserving the right to extend for optional third and fourth years.
Opportunity text
SCOPE OF WORK: PREVENTATIVE MAINTENANCE: Each lift shall be inspected, tested and maintained in accordance with all State, Local, Federal and County rules, regulations, codes and laws. Any unsatisfactory or unsafe findings must be reported to the County Designee and arrangements to rectify must be completed as soon as possible. The Drive System must be checked, including bolts securing drive unit and gearbox connection; landing positions, release of motor brake, brake, drive train pulley belts, belt pulley alignment and belt tension, ropes and/or chains for signs of wear or breakage, replace and/or adjust as necessary: clean and remove debris inside the drive cabinet, clean COG (Center of Gravity) pick-up and check/adjust tension. Check Electrical System, including switches, factory wiring, contactors, circuit boards, power supplies, motor controllers, batteries and bulbs. Check the mechanical and structural components, including the drive box, tubes, towers and conveyors. Perform the necessary cleaning, lubrication and adjustments, consumables, such as batteries and bulbs, etc., will be replaced as necessary. Tubes, Rails, Towers and Arrestors Check fastenings to walls, floor, and ceiling, check tube section splices, remove arrestor cover, check pawl free-end play and cut out switch, make necessary adjustments; use a rag along the slot in the upper tube and remove any loose grease or dirt, clean tubes and rails. Use an approved cleaner to remove grease and dirt. Platforms Check fastening of cable harnesses, wires, and switches, upper and lower carriages, inspect nylon rollers, adjust/replace as necessary. Check power operation at both landings, and fold position switches, clean and check sliding contact, remove hanger cover, check, clean and lubricate hinge pins, ramp, and lever link-ages, adjust/replace as necessary. Inspect and lubricate limit pins in the back of hanger. Safety Devices: Check Operation: under-platform sensing plate, final-limit switches, touch sensitive loading ramp safety switches. Drive Cabinet door open switch, emergency stop switches and hanger back sensors. Make necessary adjustments. Repair Work Repairs not covered under this bid specification will be charged time and material as per the rates established in the bid proposal.
Files
| File | Type | Posted |
|---|---|---|
| essex DISCLOSURE STATEMENT.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity