Professional Engineering Services - 2027 Miscellaneous Electrical Engineering For The Cape May County Municipal Utilities Authority

Scope of Services 3.1 The Authority is soliciting Proposals for Professional Electrical Engineering Services for 2026. The services shall be in support of the Authority's Engineering Staff and Facilities and are expected to be performed both in the field and at the Consultant's office. The Consultant shall report to the Authority's Chief Engineer. The scope of services shall include: 3.1.1 Preparing design documents including drawings and specifications. All documents must be done in accordance with the New Jersey Uniform Construction Code and the appropriate governing electrical subcode. All design documents must be signed and sealed by a Professional Electrical Engineer licensed in the State of New Jersey. 3.1.2 Reviewing shop drawings and various other Contractor submittals. 3.1.3 Completing cost and performance evaluations, and submitting engineering reports, when requested. All engineering reports must be signed and sealed by a Professional Electrical Engineer licensed in the State of New Jersey. 2 3.1.4 Providing engineering assistance, advice and recommendations to the Authority when confronted with an electrical engineering problem relative to operations and maintenance of Authority Facilities. 3.1.5 Trouble shooting problems in the field on all electrical, power, instrumentation, controls and digital systems that serve the Authority's Facilities. 3.1.6 Providing guidance, through the Authority's Chief Engineer, to the Authority's electricians in the field. 3.1.7 Configuring programs for PLCs, and providing technical support regarding the procurement, installation and maintenance of instrumentation, controls, cable, radio transmissions and wireless Ethernet used for the automatic control of various types of equipment and treatment processes. 3.1.8 Designing modifications to correct problems and making recommendations regarding the optimization of equipment. 3.1.9 Providing construction inspection and administration services, as requested, for electrical construction projects. 3.1.10 erforming arc flash and shock hazards analyses using ETAP software. 3.1.11 Responding to emergencies. It is required that, if requested, at least one (1) of the Consultant's staff Engineers named in the Proposal must be on site within forty-eight (48) hours of notification. 3.1.12 oordinating with the local power utility, Atlantic City Electric, and the respective Building Code Official. Deliverables: All deliverables must be provided in triplicate paper form, signed and sealed by a Professional Engineer licensed in the State of New Jersey, along with their corresponding electronic files on a Flash Drive. 3.2.1 The electronic file format to be used for the various deliverables shall be as follows: 3.2.2 Drawings: AutoCAD and PDF Specifications: WORD Reports/Engineering Evaluations: Either WORD or PDF per the Authority's preference for each document involved. Arc flash studies: ETAP software All Electronic Files including AutoCAD, WORD, ETAP and PDFs, requested by the Authority as a Contract deliverable shall be deemed property of the Authority immediately upon receipt. Moreover, any intellectual property rights attached to the AutoCAD, WORD, ETAP and PDF Electronic Files supplied, including copyrights, trademarks, and patents, shall be deemed as transferred to the Authority. The Authority reserves certain rights to the AutoCAD, WORD, ETAP and PDF Electronic Files, including, but not limited to, use, alteration, sharing, and/or distribution. However, these rights may not be exercised by the Authority for profit.