Milling - Various Locations in District 4
Solicitation # 526086424
Posted 8/16/26, 1:00 AM
No Updates
Due 8/19/26, 1:00 AM
Similar Opportunities
- The Kansas Department of Transportation is requesting bids for saw-cutting services on US-400 in Wilson and Montgomery Counties, with bids due August 19, 2026. The scope covers saw cuts on US-400 from the Wilson/Greenwood County line east to the Fredonia Round-About in Wilson County, and from the Wilson/Montgomery County line east to the Montgomery/Labette County line in Montgomery County. The bid notice does not specify quantities, unit pricing, contract term, or place of performance beyond the...
- Kansas Department of Transportation (KDOT) is requesting bids on a bridge replacement and grading project in Miami County (located 1.5 miles south and 1.8 miles west of New Lancaster), with proposals due August 19, 2026 at 1:00 p.m. local time via Bid Express. Contractors must be prequalified and registered as bid holders on KDOT's website no later than 5:00 p.m. on the Monday preceding the letting date. The scope includes bridge replacement over Middle Creek (total project length 0.142...
- The Kansas Department of Transportation is requesting sealed bids for milling and hot mix asphalt overlay work on US-59 in Labette County, extending 0.155 miles north from the Concrete/Asphalt Joint just north of North Parsons centerline, with bids due August 19, 2026. The project scope consists of milling and HMA overlay construction on the specified segment. Contract award will be made to the lowest responsive and responsible bidder meeting all qualification requirements and technical...
- The Kansas Department of Transportation is requesting bids for chip seal surface treatment on US-160 in Harper County, with bids due August 19, 2026. The project encompasses two sections totaling 25.615 miles: KA 7847-01 from the Barber/Harper County Line to the junction of US-160 and K-14 on K-2, and KA 8009-01 from the North City Limits of Anthony to the junction of US-160 in Harper County. The scope is the application of chip seal surfacing to the specified roadway segments. The bid notice...
- The Kansas Department of Transportation is soliciting bids on milling and hot mix asphalt overlay work on K-61 in Reno County, spanning 17.664 miles from the Pratt/Reno County Line to the South EWS Bridge (043), with bids due August 19, 2026. The project is tied to KA 8036-01. The scope encompasses pavement milling and asphalt overlay construction on the specified highway segment. Bidders must comply with Kansas Department of Transportation standards, specifications, and contract documents...
- The Kansas Department of Transportation is requesting bids for milling and hot mix asphalt overlay work on K-61 in Pratt County, with bids due August 19, 2026 at 1:00 p.m. Local Time and opening at 3:00 p.m. the same day. Contractors must be prequalified with KDOT and submit electronic proposals exclusively through Bid Express using AASHTO's Project Bids software; contractors must also register as bid holders by 5:00 p.m. on the Monday preceding the letting date. The project covers 16.812...
- The Kansas Department of Transportation (KDOT) is requesting bids for grading, bridge, and surfacing work on I-70 Bridge 017 over Franks Creek and B Road (3.13 miles east of I-70/US-40B West Junction) and Bridge 019 over US-40B/K-57 at the K-57/I-70 Junction in Geary County, with proposals due August 19, 2026 at 1:00 p.m. Local Time. The scope encompasses excavation, concrete work, structural steel fabrication, bridge construction and repair, asphalt and concrete surfacing, rumble strips,...
- The Kansas Department of Transportation (KDOT) is soliciting electronic bids for chip seal surface treatment on a 9.369-mile section of US Route 36 in Norton County, with proposals due August 19, 2026 at 1:00 p.m. local time and opening at 3:00 p.m. the same day at the Eisenhower State Office Building in Topeka. Contractors must be prequalified and registered as bid holders on KDOT's website no later than 5:00 p.m. on the Monday preceding the letting date (August 18, 2026). All contractors and...
- The Kansas Department of Transportation (KDOT) is requesting bids for grading, bridge, and surfacing work on I-70 Bridge 002 over Milford Lake Road in Geary County, with proposals due August 19, 2026 at 1:00 p.m. through the Bid Express website and bids to be opened at 3:00 p.m. the same day at the Eisenhower State Office Building in Topeka. Contractors must be prequalified with KDOT and notify the department of intent to bid by 5:00 p.m. on the Monday preceding the letting date. The project...
- The Kansas Department of Transportation is soliciting sealed bids for chip seal application on US-77 in Cowley County from the north city limit of Winfield to the junction of K-15, a total net length of 9.821 miles, with bids due August 19, 2026. The scope includes surface preparation, application of asphalt emulsion, and placement of aggregate chips on the designated highway section. Pricing is submitted on a unit-price basis. The contract will be awarded to the lowest qualified bidder...
The Kansas Department of Transportation is requesting bids for milling at various locations in District 4 across Bourbon, Neosho, Greenwood, Allen, Anderson, Franklin, Linn, Wilson, Montgomery, Cherokee, and Crawford counties, with bids due August 19, 2026. The project encompasses 0.25 miles of milling operations at multiple designated locations throughout the district. The bid notice document (Biod Notice-Milling - Various Locations in District 4.pdf) contains project specifications, pricing details, bid submission procedures, and contract award criteria. Interested bidders must review all project documents and submit compliant bids by the deadline.
Generated 8/18/26, 9:35 AM
Name | Description | Size | Type | Posted |
|---|---|---|---|---|
Biod Notice-Milling - Various Locations in District 4.pdf | 6MB | 8/16/26 |