Metal roofing milo and enfield

The State of Maine Division of Purchases is requesting quotes on metal roofing materials for buildings in Milo and Enfield under RFQ, with quotes due September 28, 2010 at 2:00 p.m. local time.

The scope comprises green 29-gauge metal roofing assemblies for two locations: Milo Building #35943 requires 84 sheets of standing-seam panels (38" wide, 23' length), ridge caps, rake trim, fascia trim, universal endwall components, fasteners (2" and 1" green screws), coil stock, 3,000 linear feet of 1x4 strapping, J-channel vinyl, and vinyl soffit (solid and perforated). Enfield Building #36173 at 31 Metal Drive requires standing-seam panels in 38-inch widths (15'-3" and 24'-0" lengths), ridge caps, rake trim, fascia trim, universal endwall components, 10,500 and 15,000 units of green metal screws respectively, 5,000 linear feet of coil stock (24" by 50-foot rolls), 1-by-4 strapping, J-channel vinyl siding, and solid and perforated vinyl soffit in specified quantities. A technical drawing is available in the solicitation package.

Bidders must submit electronic quotes through the State of Maine's AdvantageME Vendor Self-Service system with all unit prices and transportation charges included. The State reserves the right to award on a per-item or group basis and will apply a tie-breaking preference to in-state bidders or those offering Maine-manufactured commodities. Cash discounts of 20 days or more will be considered in award; discounts under 20 days will not. The State is exempt from Federal and Maine State sales and use taxes, which should be excluded from quotes. All questions must be submitted through the AdvantageME system no later than 48 hours prior to bid closing. Contact: Calvin Curtis, Maine Department of Transportation, 732-3304 (office) or 592-0127 (cell).