Golf View Dr Area Resurfacing
Closed State & local contract opportunity Posted
- Solicitation number
- B26-015-ENG
- State
- New Jersey
- Responses due
Opportunity facts
- Jurisdiction
Opportunity details come from constructionbidsource.com. Updated .
About this opportunity
Township of Franklin, Somerset County, New Jersey is requesting sealed bids for Golf View Drive Area Resurfacing under Contract #B26-015-ENG, with bids due July 31, 2026 at 11:30 a.m. at the Municipal Building, 475 DeMott Lane, Somerset. The project encompasses resurfacing work on five streets: Vliet Road, Golf View Drive, Carriage Trail, Champlain Way, and Horseshoe Court. Contractors must comply with New Jersey Prevailing Wage Act requirements and hold valid Public Works Contractor Registration certificates at bid submission.
The scope includes milling of bituminous concrete at 35,800 square yards (2-inch depth), placement of 4,700 tons of Hot Mix Asphalt 9.5M64 surface course, reset of 5 sanitary sewer manholes (with detailed collar specifications per Sewerage Authority), 19 water valve boxes, and 37 drain inlets with new N-Eco heads and bicycle-safe grates meeting NJDEP Stormwater Standards. Additional work includes 387 square yards of concrete handicap curb ramps, 31 truncated domes, 175 linear feet of Belgium block curb, 530 linear feet of concrete curb, traffic markings, and 100 man-hours of traffic control services. Work is firm fixed price with asphalt price adjustment provisions under New Jersey statute; completion required within 60 days from Notice to Proceed, with work hours limited to 9:00 a.m. to 3:30 p.m.
Bidders must submit a certified check, cashier's check, or bid bond equal to 10 percent of total bid price (not exceeding $20,000) and provide proof of non-debarment, business registration, affirmative action documentation, and statement of ownership identifying all stakeholders with 10 percent or greater interest. The successful bidder must obtain a Performance and Payment Bond equal to 100 percent of contract amount and a one-year maintenance bond of 10 percent upon completion. The township will retain 2 percent payment until final acceptance. Drawings and specifications are available in-person at the Purchasing Office beginning July 17, 2026 (8:30 a.m. to 4:00 p.m.) and on the township website.
Opportunity text
NOTICE IS HEREBY GIVEN that sealed bids will be opened and read in public by the Purchasing Agent for Township of Franklin, Somerset County for Golf View Dr Area Resurfacing. Scope: Under this item, the Contractor shall furnish all labor, materials, equipment, etc., and set to grade of the new pavement all drain inlets, water boxes and gas boxes. It shall include all excavation and backfill. This item shall also include replacing all existing inlet grates with bicycle grates and N-Eco heads. Sanitary Sewer manhole specifications per Sewerage Authority: The Contractor must inform the Township Sewerage Authority a minimum of 24 hours prior to when sanitary sewer manholes are to be raised. They shall be raised to one half inch below finished grade when building a circular brick in mortar collar above the precast manhole opening. The main requirement in manhole rim elevation adjustment is manhole frames shall be adjusted to one half inch below finish grade by building a circular brick in mortar collar above the precast manhole opening. Maximum height of the collar shall be 12 inches. After laying the collar and free setting the frame in a full bed of mortar, the exterior of the collar shall receive a minimum thick, mortar to provide water tightness. Manhole rings are not permitted. Township Water Valve Boxes: Township water valve boxes shall be raised by risers supplied by the contractor. Storm Sewer Manholes: Storm sewer manholes shall be raised by risers supplied by the contractor. Storm Sewer Inlets: Storm sewer inlets shall be raised, by risers and/or new frames supplied by the contractor. N-eco heads and bicycle safe grates, meeting NJDEP Stormwater Standards, shall be installed and if necessary, risers will be supplied by contractor to allow for proper clearance between new head and grate. Heads shall be placed as to not cause a tripping hazard and shall have bituminous expansion joints replaced between head and curb. PSE & G Gas Boxes and Manholes: PSE & G gas boxes and manholes shall be raised as per PSE & G specifications with risers supplied by the contractor.
Files
| File | Type | Posted |
|---|---|---|
| franklin 639198197949400000.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Similar opportunities
- Ask GovTribe AI about this opportunity