Building 7230 Blast Booth Recovery Trough & Equipment

The State of Maine is requesting quotations for fabrication and installation of a blast booth floor recovery system at Building 7230, located at 89 Kansas Road, Limestone, Maine, with quotations due July 12, 2011.

The scope comprises a recovery trough measuring 3 feet wide by 2 feet deep by 78 feet long, constructed with 3,500 psi concrete and #4 rebar reinforcement; a grating support system rated for 750 pounds per square foot; and a complete recovery equipment package. The equipment package includes a 9-inch diameter by 78-foot long screw auger with independently driven screws, 2-inch flange bearings, polyurethane bushings, and 14.5-inch flightings; a 5 horsepower, 460-volt three-phase 60-hertz TEFC motorized screw drive assembly with 60:1 gear reducers; and a UL 508 blast system control panel with motor starters, overload fuses, illuminated selectors, and push button operators. All work includes delivery, installation, assembly, electrical connections, and placement of the trench auger and trough system. All materials and workmanship must comply with applicable Federal and State regulations and codes.

The State participates in the Buy American Act. Bidders must provide complete legal company names and, if applicable, DUNS and CAGE Code information. Award decisions will be based on best value, contingent upon successful screening through the Federal Excluded Parties List System. All inquiries must be directed to the State Purchasing Division, not the MMA-Limestone Facility. Bid prices must include all transportation expenses to the project site. Payment terms are Net 30.