24031R0724/Work on Tower 1 Tag # S0084A

Closed State & local contract opportunity Posted

Solicitation number
SRC0000022475
State
Alabama
Responses due

Opportunity facts

Jurisdiction

Opportunity details come from alabamabuys.gov. Updated .

About this opportunity

The state of Alabama has posted a state and local contract opportunity for work on Tower 1, Tag # S0084A, located in Chilton County, Alabama. The selected contractor will be responsible for picking up and returning an ITS tower shelter trailer from Clanton, AL to the ITS factory in Tulsa, OK. The scope of work also includes replacing all SO electrical cable on the tower system, including all cabling to the tower control panel, scope motor, and hydraulic power unit. The contractor must replace all limit switches on the tower and base, the tower lock-out cable assembly, the scope motor, and the fiberglass control panel. Additionally, the contractor will perform a general inspection and re-tension the tower, remove/clean/inspect the outriggers, replace wheel bearings/seals/synthetic grease, replace the hydraulic oil and filters, and inspect/adjust the brake shoe assembly. The solicitation does not provide details on response dates, award dates, contract term, or other administrative information.

This contract opportunity does not specify any set-aside designations or restrictions on the types of organizations that can respond. The solicitation also does not list any incumbent vendors or current contractors, nor does it provide information on existing infrastructure or technology that requires integration. The award value or budget range for this contract is also not provided.

Opportunity text

Work to be done on Tower 1 Tag # S0084A Serial #- 12HGP4026AS10205 State Property # - 031-04653 1 Pick up & return AL EMS owned ITS tower shelter trailer unit from Clanton, AL and deliver to ITS factory Tulsa, OK 1 Replace all SO electrical cable on tower system. All SO cable and all connectors for SO cable replaced w/new. Includes all cabling ran totower control panel & to scope motor & hydraulic power unit (HPU). All limit switches replaced on tower & base 1 R & R tower lock out cable assy, new cable 1 R & R scope motor, new OEM Baldor 1HP 1 General inspection and re-tension tower 1 Replace Fiberglass control panel w/new 4 Remove/Clean/Inspect Outriggers 4 Replace wheel bearings/seals/synthetic gr 1 Replace hydraulic oil and filters 4 Inspect/Adjust brake shoe assembly

Files

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Similar opportunities
  • Ask GovTribe AI about this opportunity