Zeiss Contura machine (CMM) Hardware and Retrofit Services
Closed Solicitation Posted
- Solicitation number
- 80NSSC26935510Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334513 Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Place of performance
- Huntsville, Alabama 35812, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center intends to issue a sole source contract to CARL ZEISS INDUSTRIAL QUALITY SOLUTIONS LLC for Zeiss Contura coordinate measuring machine (CMM) hardware and retrofit services, with capability statements due June 15, 2026 by 4:00 a.m. Central Standard Time. The procurement is conducted under FAR 12.102(a) as a commercial item acquisition; the Government reserves discretion to conduct this on a competitive basis based on responses received.
Place of performance is Building 4487, Room W106, Marshall Space Flight Center (MSFC) in Huntsville, Alabama. The scope involves retrofitting an existing ES23 Zeiss Contura 12/18/8 system (Serial Number 732301560593) with an RDS-D8-CAA sensor featuring DotScan 3mm capability, including installation of multiple sensor options (DotScan 3mm, 1mm, and 10mm), probe holders, cleaners, and spare parts (controller, optical waveguides, calibration hardware). Installation supervision is scheduled for 3 days and encompasses unpacking, machine assembly, utility hookup, cabling, leveling, electronic and mechanical adjustments, and Zeiss standard calibration and accuracy testing per machine specifications. Total performance period is 12 weeks from authorization to proceed. NAICS code is 334513, Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables; PSC code is 7B20, IT and Telecom—High Performance Compute. Tracy Bremer, Procurement Specialist (tracy.g.bremer@nasa.gov), is the primary point of contact. NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies.
Notice text
NASA/NSSC has a requirement for Zeiss Contura machine (CMM) Hardware and Retrofit Services.
NASA/NSSC intends to issue a sole source contract to CARL ZEISS INDUSTRIAL QUALITY SOLUTIONS
LLC, 6250 Sycamore LN N, Maple Grove, Minnesota 55369-6310 under the authority of FAR 12.102(a). It has
been determined that CARL ZEISS INDUSTRIAL QUALITY SOLUTIONS LLC is the sole provider of Zeiss
Contura machine (CMM) Hardware and Retrofit Services.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space
Flight Center (MSFC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures
prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 334513.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 a.m. Central Standard Time on 6/15/2026. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-
Advocate-Listing.pdf .
Primary Point of Contact:
Tracy Bremer
Procurement Specialist
tracy.g.bremer@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Keyence VHX-X1 Digital Microscope | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| ComposiCAD Gold 4 axes | Shared Services Center | No set-aside | |
| XIMEA xiSpec Hyperspectral Imaging System | Shared Services Center | No set-aside | |
| 2WG S-Band Rotary Joint | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity