WY-casper control center kitchen remodel

The Bureau of Reclamation's Missouri Basin Regional Office intends to solicit a Request for Quote (RFP) for a kitchen remodeling effort at the Casper Control Center (CCC), located in the Bureau of Reclamation's Wyoming Area Office Mills Complex (BOR Mills) at 705 Pendell Blvd in Mills, Wyoming 82601.

The RFQ will be issued at https://www.sam.gov. The principal components of work include the following:
(1) A new counter along two of the walls in an L shape that includes a cutout for a new 24' sink and leaves empty space for the existing 20' wide oven
(2) New 24' sink/ garbage disposal
(3) New reverse osmosis system for drinking water
(4) New storage cabinets underneath the new counter in an L shape
(5) New elevated storage cabinets above the new counter on two of the walls in an L shape
(6) New outlets installed on all three walls, per current electrical code
(7) New lighting fixture is installed on the ceiling
(8) New paint on the walls.

In accordance with Part 13 of the Federal Acquisition Regulation, the Bureau of Reclamation intends to issue Solicitation No. 140R6024Q0032 on or around February 14, 2024. The close for acceptance of quotes is anticipated to be 30 days from the date the solicitation is actually issued. Quotations are expected to be submitted by electronic (email) to the Contract Specialist at mfrost@usbr.gov. The estimated price range for this acquisition is less than $25,000. Reclamation anticipates the set-aside for this acquisition to be Total Small Business. The applicable North American Industry Classification System (NAICS) code is 236118, Residential Remodelers, which has an associated Small Business Size standard of $45 million. The period of performance is anticipated to be completed within 180 calendar days of contract award. The contractor who receives the award is required to commence work within 10 days of receiving the Notice to Proceed. The period of performance is inclusive of receipt and acceptance of all submittals by the Bureau of Reclamation as well as final cleanup.
For further information, interested offerors should contact Contracts Specialist Mitchell Frost at email address mfrost@usbr.gov. It is incumbent upon contractors to monitor https://www.sam.gov for the RFP release and all subsequent amendments.
Effective October 26, 2018 all contractors interested in doing business with the Federal Government must be registered in the System for Award Management (SAM) database when submitting a quotation. Note: Registration in SAM does not constitute an automatic award of any contract or agreement to the registering contractor. SAM is a centralized database consolidating the Central Contractor Registration (CCR), the online Representation and Certifications Application (ORCA), and the Excluded Parties List System (EPLS). Additionally, the contractor's DUNS and BRADSTREET and banking information are required for the SAM registration. Annual confirmation of registration requirements must be accomplished through the SAM website at https://www.sam.gov. For assistance with registering in SAM, contact the Federal Services Desk at 1-866- 606-8220. Payment requests for the anticipated contract are required to be submitted electronically through the U.S. Department of Treasury's Invoice Processing Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register, access and submit requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail at ippgroup@bos.frb.org or by telephone at (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Officer with their proposal.