Wire EDM
Closed Solicitation Posted
- Solicitation number
- W911S226U2323
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 332710 Machine Shops
- Place of performance
- McAlester Army Ammunition Plant 1 C-Tree Road, Building 6 McAlester, OK 74501 74501
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command (MICC) Fort Drum is procuring a Wire EDM (Electrical Discharge Machine), specifically a Mitsubishi EDM Model MV4800-ST or equivalent equipment meeting specified technical standards. The solicitation requires a wire EDM machine with cutting travel dimensions of at least 15 inches on the X-axis, 18 inches on the Y-axis, and 16 inches on the Z-axis, along with wire range capability covering .006 to .012 inches and a water filtration system rated to 5 microns. Standard equipment must include water level controls, auto threader, chiller, wire spools in 10kg and 25kg capacities, wire chopper processor, auto power recovery, work clamping kit, angle controls, and linear scales on X and Y axes to 2 millionths absolute precision. The machine must operate on 208V/60Hz/3-phase power. The solicitation was posted on December 12, 2025, with a proposal due date of December 22, 2025, providing potential bidders a ten-day response window.
This is a Total Small Business set-aside contract, limiting competition to small business entities. The place of performance is located at 1 C Tree Road, Building 4, McAlester, Oklahoma 74501, with the work classified under NAICS 332710 (Machine Shops) and PSC 3410 (Electrical and Ultrasonic Erosion Machines). No information regarding specific award values, budget ranges, or potential incumbent contractors is disclosed in this solicitation notice. The contract represents a single equipment procurement rather than an ongoing service arrangement, with the primary focus on acquiring a fully equipped wire EDM machine meeting the detailed technical specifications outlined by the Army.
Notice text
MITSUBISHI EDM Model MV4800-STHIS IS FOR A WIRE EDM THAT MEETS AT MINIMUM THE FOLLOWING SPECIFICATIONS.CUTTING TRAVEL: X-AXIS NEEDS TO BE AT LEAST 15 INCHES; Y-AXIS TRAVEL NEEDS TO BE AT LEAST 18 INCHES; Z-AXIS TRAVEL NEEDS TO BE AT LEAST 16 INCHESWIRE RANGE NEEDS TO AT LEAST COVER .006 INCH TO .012 INCHFILTER SYSTEM NEEDS TO FILTER WATER TO 5 MICRONSPOWER REQUIREMENTS TO BE 208V/60Hz/3PHSTANDARD EQUIPMENT NEEDS TO INCLUDE:WATER LEVEL CONTROLS FOR Z-AXISAUTO THREADER FOR WIRECHILLERWIRE SPOOLS 10KG AND 25KGWIRE CHOPPER (PROCESSOR)AUTO POWER RECOVERYWORK CLAMPING KITANGLE CONTROLSLINEAR SCALES ON X AND Y AXIS TO 2 MILLIONTHS ABSOLUTE SCALES
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Industrial Sewing Machines | MICC Fort Drum | Total Small Business | |
| Swivel shackle assembly | MICC Fort Drum | Total Small Business | |
| Repair/Replace Overhead Cranes on Fort Drum | MICC Fort Drum | Total Small Business | |
| Cutter per 13052983-102 | ACC Rock Island | No set-aside | |
| Mandrels for the Watervliet Arsenal | ACC Warren | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity