Wallace and Coast CNC Pipe Bender

The Defense Logistics Agency (DLA), Land and Maritime located at the Norfolk Naval Shipyard, Portsmouth, Virginia, Contracting Division intends to negotiate a firm fixed price contract, for the items listed below utilizing the North American Industry Classification System Code 333515 Cutting Tool and Machine Tool Accessory Manufacturing. This requirement will be set aside as a 100% Small Business concern and incorporates FAR Clause 52.211-6 Brand Name or Equal.  The items being purchased are for a Wallace and Coast Pipe Bender as described in the Scope of Work.

The Contract Line Items (CLINs) are as follows.

N4215803490157

DIE

BEND DIE 3" IPS, 3D

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

unique identification or a DoD recognized unique identification equivalent.

1 Each

FOB: Destination

N4215803490158

DIE

BEND DIE 3" IPS, 5D

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD

unique identification or a DoD recognized unique identification equivalent.

1 Each

FOB: Destination

N4215803490159

DIE

BEND DIE 3" IPS, ASSIST

1 Each

FOB: Destination

N4215803490160

CLAMP

CLAMP INSERT 3" IPS

1 Each

FOB: Destination

N4215803490161

MANDREL

PLUG MANDREL 3" IPS X SCH 160 (.438" WALL)TSC

1 Each

FOB: Destination

This procurement will be processed in accordance with Federal Acquisition Regulation (FAR) Subpart 13 Simplified Acquisition Procedures for Commercial Item. The solicitation number is SPMYM121Q0042 and it is expected to be posted on or about 5 April 2021 and posted in BETA SAM, https://beta.sam.gov/. Quotes will be due by 6:00 am EST on 13 April, 2021 and may be emailed to the attention of Craig Harmon at craig.harmon@dla.mil. Please make sure that the solicitation number (SPMYM121Q0042) is included in the subject line of any email correspondence.  Emails without subject lines will not be read because of security issues.

Vendors are hereby notified that the solicitation and any subsequent amendments to the solicitation will only be available by downloading the documents at https://beta.sam.gov/

By submitting a quote, the vendor will be self-certifying that neither it nor its principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any Federal agency.

1. SCOPE OF WORK:

   1. This scope covers the requirements for ordering pipe bending tool sets for the Wallace and Coast CNC Pipe bender.
   2. Delivery to Norfolk Naval Shipyard, Portsmouth, VA.
   3. Contractor shall contact:  Cezar Jackson at 757-284-6506 before delivering equipment for scheduling purposes.
   4. Second Point of Contact for Norfolk Naval Shipyard: Russell Harris 757-636-4908.
2. EQUIPMENT DESCRIPTION: The equipment shall consist of tooling for a Wallace and Coast CNC pipebender, 4" - 6" MPS - Type 2, DPAS 4215801325, Manufacturer Model Number 1006A-PC, Serial Number 1006-PC-97-545, as described below:
   1. COMPONENTS: Tooling sets shall consist of the following components (in CCW configuration) for various specified sizes:
      1. Bend die
      2. Clamp die
      3. Pressure die – mild steel
      4. Mandrel
   2. MATERIAL: Unless otherwise noted, all tooling components shall be manufactured from heat treated tool steel.
   3. GRIP AREA: All clamping dies shall be smooth, and be of sufficient length to prevent slippage of listed pipe/tube sizes and materials.
   4. MANDREL: The mandrel shall fit the mandrel rods of the 1006 bender owned by C960 in Bldg.202.

1. SALIENT CHARACTERISTICS: The pipe bending toolsets will have the following salient characteristics:

DESCRIPTION

QUANTITY

3.0" IPS BEND DIES (3.5” OD)

BEND DIE BODY,

3” IPS, 3.5” OD

9.00 CLR (3D)

180.0 MAX DOB

WEIGHT REDUCING HOLES ALLOWED

1

BEND DIE BODY,

3” IPS, 3.5” OD

15.00 CLR (5D)

180.0 MAX DOB

WEIGHT REDUCING HOLES ALLOWED

1

PRESSURE DIES

PRESSURE DIE, ASSIST

3.0 IPS 3.5 OD,

57” LONG,

SMOOTH FINISH

1

CLAMP DIES

CLAMP DIE,

3.0 IPS 3.5 OD,

SMOOTH FINISH

1

MANDRELS

PLUG MANDREL,

3.0 IPS 3.5 OD,

SCH-160, 0.438 WALL

1

1. LIFTING /HANDLING

1. 1. Tooling weighing more than 50 lbs. shall come equipped with all necessary lifting and handling attachments per CFR 1910.217(d)(8).
   2. Weight reducing features such as section holes may be incorporated into the bending dies.
   3. Contractor shall provide a 5/8-11 UNC-2B RH tapped hole(s), 1-118 inch deep, on all dies over forty-five pounds and a 3/4-10 UNC-2B RH tapped hole 1-1/8 inch deep, for all dies over 4000 lbs. as a means for safely lifting, using customer supplied swivel hoist ring(s).
   4. The tapped holes shall be vertical, and arranged about the center of gravity in non-contact surfaces for balanced lifting in the working position of the die.
2. TECHNICAL POC:

Cezar Jackson

Cezar.jackson@navy.mil

Cell: (757) 284-6506