Vertical Grinder and Blade Tip Grinder
Closed Solicitation Posted
- Solicitation number
- N6833524R0014
- Agency
- Naval Air Warfare Center Naval Air Systems Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- PSC
- 3415 Grinding Machines
- Place of performance
- Cherry Point, North Carolina 28533, United States
- Points of contact
-
- Tammy Fossa tamara.d.fossa.civ@us.navy.mil (240) 577-8312
- William T. Hemhauser william.hemhauser@navy.mil
- William T. Hemhauser william.t.hemhauser.civ@us.navy.mil
- Danielle Ramos danielle.r.ramos4.civ@us.navy.mil
Notice details come from SAM.gov. Updated .
About this opportunity
The Naval Air Warfare Center Aircraft Division is seeking to procure a specialized grinding cell consisting of a jet engine blade tip grinder and a jet engine vane tip stator grinder for the CH-53K aircraft. This is an unrestricted competitive solicitation under Request for Proposal N68335-24-R-0014, targeting U.S. Government and DoD contractors registered in the System for Award Management (SAM). The contract will be awarded on a firm-fixed-price basis to the lowest price technically acceptable offer that meets the government's Salient Characteristics Requirements List specifications. Potential offerors must have a current NIST SP 800-171 assessment and provide an approved DD2345 to access complete solicitation documents. Key deadlines include November 25, 2024, for document access requests, January 2, 2025, for submitting questions, and the proposal submission deadline of January 23, 2025, at 12:00 PM EST.
The solicitation has no specific small business set-aside designation and will be performed at MCAS Cherry Point, NC. The contract includes eight Contract Line Item Numbers (CLINs) covering the vertical grinder, blade tip grinder, installation, commissioning, training at multiple levels, and technical data deliverables. Delivery is required within 720 days after contract award, with proposals required to remain valid for 180 days. Other than small businesses must submit a subcontracting plan with their proposal. The project involves manufacturing grinding equipment for specific T408 engine components, including HPC ROTOR forward and aft sleeves, impeller shroud holder, GGT ROTOR air pressurizing arbor and seal rings, and HPC STATOR grind tilt and center fixture. The procurement falls under the Machine Tool Manufacturing NAICS category (333517) and Grinding Machines PSC category (3415).
Notice text
4 versions
Update #4 · Latest ·
This solicitation has been EXTENDED to 1:00 pm EST on Monday, 27 January 2025 for the purpose of explaining that proposal submissions via DOD Safe will require a request for drop off to be provided by the Government. PLEASE CONTACT TAMMY FOSSA via email at tamara.d.fossa.civ@us.navy.mil to request a Dropoff Request via DODSafe. A link will be sent via email that will enable the offeror to send the proposal via DODSafe.
***END SUMMARY OF CHANGES FOR AMENDMENT 0004***
This solicitation has been amended to answer a question and to update the RFP N68335-24-R-0014 (the version originally attached inadvertently had the draft watermark in it) (Amendment 0002) and to update the secondary point of contact (Amendment 0003). Offerors should take note that Danielle Ramos has been REMOVED as the secondary POC and has been replaced with Will Hemhauser - ALL PROPOSALS SHALL BE SUBMITTED TO BOTH THE PRIMARY AND SECONDARY POC'S IDENTIFIED IN THE RFP. As a result of the amendments, the proposal submission date has been extended to 12 pm EST on Thursday, 23 January 2025.
***END SUMMARY OF CHANGES FOR AMENDMENT 0002 and AMENDMENT 0003***
This solicitation has been amended to update the SOW (to remove section 5, which was considered duplicative of other sections) and to attach a CDRL that is referenced in the SOW but was inadvertently omitted from the solicitation. Offerors who are already in possession of the documents for this effort should contact Tammy Fossa at tamara.d.fossa.civ@us.navy.mil to request the updated SOW and additional CDRL, which will be sent via DOD Safe. The proposal submission date has been extended to 4 pm EST on Tuesday, 21 January 2025.
***END SUMMARY OF CHANGES FOR AMENDMENT 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the manufacture and production of jet engine blade tip grinder and a jet engine vane tip stator grinder for the CH-53K IAW the attached Solicitation N68335-24-R-0014. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 25 November 2024 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 6 January 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 2 January 2025.
Update #3 ·
This solicitation has been amended to answer a question and to update the RFP N68335-24-R-0014 (the version originally attached inadvertently had the draft watermark in it) (Amendment 0002) and to update the secondary point of contact (Amendment 0003). Offerors should take note that Danielle Ramos has been REMOVED as the secondary POC and has been replaced with Will Hemhauser - ALL PROPOSALS SHALL BE SUBMITTED TO BOTH THE PRIMARY AND SECONDARY POC'S IDENTIFIED IN THE RFP. As a result of the amendments, the proposal submission date has been extended to 12 pm EST on Thursday, 23 January 2025.
***END SUMMARY OF CHANGES FOR AMENDMENT 0002 and AMENDMENT 0003***
This solicitation has been amended to update the SOW (to remove section 5, which was considered duplicative of other sections) and to attach a CDRL that is referenced in the SOW but was inadvertently omitted from the solicitation. Offerors who are already in possession of the documents for this effort should contact Tammy Fossa at tamara.d.fossa.civ@us.navy.mil to request the updated SOW and additional CDRL, which will be sent via DOD Safe. The proposal submission date has been extended to 4 pm EST on Tuesday, 21 January 2025.
***END SUMMARY OF CHANGES FOR AMENDMENT 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the manufacture and production of jet engine blade tip grinder and a jet engine vane tip stator grinder for the CH-53K IAW the attached Solicitation N68335-24-R-0014. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 25 November 2024 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 6 January 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 2 January 2025.
Update #2 ·
This solicitation has been amended to update the SOW (to remove section 5, which was considered duplicative of other sections) and to attach a CDRL that is referenced in the SOW but was inadvertently omitted from the solicitation. Offerors who are already in possession of the documents for this effort should contact Tammy Fossa at tamara.d.fossa.civ@us.navy.mil to request the updated SOW and additional CDRL, which will be sent via DOD Safe. The proposal submission date has been extended to 4 pm EST on Tuesday, 21 January 2025.
***END SUMMARY OF CHANGES FOR AMENDMENT 0001***
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the manufacture and production of jet engine blade tip grinder and a jet engine vane tip stator grinder for the CH-53K IAW the attached Solicitation N68335-24-R-0014. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 25 November 2024 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 6 January 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 2 January 2025.
Update #1 ·
The Naval Air Warfare Center Aircraft Division, is officially releasing a Request for Proposal (RFP) as an unrestricted competition. This solicitation is for the manufacture and production of jet engine blade tip grinder and a jet engine vane tip stator grinder for the CH-53K IAW the attached Solicitation N68335-24-R-0014. For access to the Government provided documents associated with this solicitation, please send a request with an approved DD2345 via E-Mail to the address shown below no later than 4 pm Monday, 25 November 2024 referencing this post and requesting access.
Interested Offerors must be U.S. Government contractors and/or U.S. DoD contractors. Contractors must be registered in the System for Award Management (SAM) database, which can be accessed at www.sam.gov.
All responsible sources are encouraged to submit required information for this effort as described in the RFP.
The response date for proposal submission is 12:00 PM EST, 6 January 2025.
The point of contact is Tammy Fossa, tamara.d.fossa.civ@us.navy.mil. All questions and inquiries regarding this solicitation shall be submitted via E-Mail. Questions must be submitted no later than 4 pm 2 January 2025.
Attachments
| File | Type | Posted |
|---|---|---|
| RFP Amendment N6833524R0014-0003 (0410 H53K Engine Grinders-TBD).pdf | ||
| RFP Amendment N6833524R0014-0002 (0410 H53K Engine Grinders-TBD).pdf | ||
| RFP N6833524R0014 (0410 H53K Engine Grinders-TBD).pdf | ||
| RFP Amendment N6833524R0014-0001 (0410 H53K Engine Grinders-TBD).pdf | ||
| RFP N68335-24-R-0014 (0410 H53K Engine Grinders).docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Vertical Grinder and Blade Tip Grinder | Solicitation | |
| Vertical Grinder and Blade Tip Grinder | Pre-Solicitation | |
| Jet Engine Blade tip and Case Match Grinding Cell | Pre-Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity