Vertical Cavity Surface-Emitting Laser (VCSEL) pumps for High Energy Erbium or Thulium Fiber Lasers

Closed Solicitation Posted

Solicitation number
A11-058
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

NAICS code
541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
PSC
AC12 National Defense R&D Services; Department Of Defense - Military; Applied Research
More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

Notice text

DoD SBIR topic A11-058

Component: ARMY

Command: SMDC

Phase: SBIR Program Phase I Action

Technology Areas: Sensors; Weapons

Keywords: Fiber Laser Pumps; Vertical Cavity Surface-Emitting Laser (VCSEL); High Energy Fiber Laser; Thulium; Erbium

Objective:

To research and develop Vertical External Cavity Surface-Emitting Laser (VCSEL) array fiber coupled pumps or single emitters for Erbium or Thulium fiber lasers. The goal is to design, build and test a VCSEL array that surpass traditional edge emitting diode array performance for pumping fiber lasers in the areas of higher efficiency, lower production costs, higher brightness, and better thermal properties.

Description:

While it has been determined that high energy lasers can provide a tremendous benefit to the Army for area protection against rockets, artillery, and mortars (RAM) and other potential threats, there is concern about current Nd:YAG based high energy laser systems potentially causing collateral eye damage due to scatter off of target surfaces. In addition, the efficiencies of slab based solid state lasers make it desirable to explore the possibilities of reduced eye hazard fiber based high power lasers. This SBIR topic focuses on development of the VCSEL pump array for pumping an Erbium or Thulium fiber laser. Early research investment in laser technology that supports higher efficiencies, more compact, reduced eye hazard wavelength, higher power, and lower cost is critical. The purpose of this SBIR is to investigate and demonstrate through laboratory experiments and demonstration, modeling and simulation, and building a breadboard VCSEL pump array in phase II, the potential of high brightness, and cost savings of using VCSEL technology for fiber laser pumping. The use of VCSEL technology for fiber laser pump source has many benefits. For field applications, it is important to note that VCSEL emitters have demonstrated high temperature operation and can be cooled at coolant flow rates that are much lower than traditional edge emitting diode arrays. It is anticipated that VCSEL pump arrays would tremendously reduce the size and weight for a fiber based laser system. The fabrication methods of the VCSEL arrays are appropriate for lowering the ultimate cost of the most expensive component for diode-pumped fiber lasers, the diode arrays, thus providing a long term cost advantage.

Phase I:

Conduct research, analysis, and studies on the selected VCSEL pump array architecture and develop measures of performance and document results in a final report. Provide analysis supporting the claimed VCSEL array performance. Identify requirements and performance metrics required for VCSEL fiber coupled pumping of a fiber laser. The phase I effort should include modeling and simulation results supporting performance claims. The effort should also produce a preliminary concept for VCSEL array proposed to be built during the phase II effort.

Phase II:

The Phase II effort should consist of, completing the breadboard VCSEL array fiber coupled pump design, building VCSEL base fiber coupled pump, and testing against the performance metrics identified in phase I. Added validation of the VCLES pump concept could be to actually perform an experiment demonstrating the performance by pumping an Erbium or Thulium fiber laser. The data, reports, and tested VCSEL array hardware will be delivered to the government upon the completion of the phase II effort.

Phase III:

If the phase II program is successful, the direct application to the developed VCSEL technology will be to insert it into the high power laser development program that is be managed by the US Army Space and Missile Defense Technical Center. In addition, the VCSEL technology can be used to replace many diode array pumped laser devices to reduce size, weight, and cost. There are many potential applications of a reduced eye hazard wavelength high energy laser. Commercial and Military applications include laser remote sensing, laser communication, material processing, and remote target destruction. Industrial high-power applications of high-power solid-state lasers include welding, drilling, cutting, marking, and micro-processing. High energy DoD laser weapons offer benefits of graduated lethality, rapid deployment to counter time-sensitive targets, and the ability to deliver significant force either at great distance or to nearby threats with high accuracy for minimal collateral damage. Laser weapons for combat range from very high power devices for air defense to detect, track, and destroy incoming rockets, artillery, and mortars to modest power devices to reduce the usefulness of enemy electro-optic sensors. Building and testing a scalable reduce eye hazard wavelength high energy laser breadboard device using the demonstrated VCSEL technology would be a phase III effort.

Files

File Type Posted
A11-058.pdf PDF

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors