Variable Pulsed Parameter Tracking Illuminator Laser
Closed Solicitation Posted
- Solicitation number
- A17-104
- Agency
-
Space and Missile Defense Command
Department of the Army, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
Notice text
DoD SBIR topic A17-104
Component: ARMY
Command: SMDC
Phase: SBIR Program Phase I Action
Technology Areas: Electronics
Keywords: Pulsed laser; LIDAR; LADAR; eye-safe laser; laser illuminator; erbium laser
Objective:
To design and build a prototype pulsed laser in the 1550 nm wavelength region with variable pulse parameters of 500 Hz to 5 kHz and 50 mJ to 300 mJ. The pulse parameters shall be met such that the average power ranges between 150 and 250 Watts, or the 300 mJ pulse at 500 Hz and 50 mJ pulse at 5 kHz. The prototype laser must prove design capability.
Description:
Current state of the art tracking Illuminator lasers (TILs) are insufficient for a wide variety of expected high energy laser weapon system engagements. Success has been made in TIL technology in recent efforts, however, additional efforts are necessary to support a versatile tracking system capable of tracking a wide dynamic range of engagements. Targets at close range require a faster pulse duration and less energy per pulse than long range targets. A TIL with variable pulse parameters is desired to achieve constant radiometric conditions in the return scattered light from a target to a tracking sensor.
Pulsed Tracking Illuminator Lasers (TILs) are an integral element of a directed energy targeting and tracking system (TTS). The versatility of the TIL for target detection, target identification, pose estimation 3D LIDAR and aim point tracking requires a pulsed laser with variable performance parameters that at present are not available in any pulsed laser architecture, especially in the spectral region between 1.48-1.62 microns. TIL wavelengths must be capable of transmitting through the atmosphere with minimum absorption. The TIL must operate over a broad pulse repetition rate range (500Hz-5kHz). The TIL shall also have variable energy per pulse that coincide with the repetition rate such tracking sensors with limited adaptive gain detect close to the same light scattered from near and far targets. The laser must be capable of generating high pulse energies of 300mJ at the lower rep rates and maintain a reasonable pulse energy output of 50mJ at the higher rep rates. Versatility in pulse width is desired to maintain the ability of this laser to use in a LIDAR system where the pulse width needs to be between 1 ns and 10 ns, while the higher pulse energies required may need 50nsec pulse widths to achieve 300mJ pulse energies. A critical performance requirement for the TIL is a short coherence length in order to minimize speckle at the target.
Phase I:
The phase I effort shall produce a design for a pulsed laser demonstrations over the performance range detailed above at spectral region between 1.48-1.62 microns. The variable pulse parameters desired from this solicitation are repetition rates of 500 Hz – 5 kHz, pulse energies of 300 mJ – 50 mJ, and pulse duration of 1 ns – 10 ns. The quality of the output beam must support uniform illumination for overfilling the target and minimize speckle.
Phase II:
The Phase I designs will be utilized to fabricate, test, and evaluate a breadboard system. The designs will then be modified as necessary to produce a final prototype. The final prototype shall demonstrate operational capability specified in the solicitation and be packaged in a portable platform for ease of testing in beam control systems.
Phase III:
Civil, commercial and military applications include short-range counter-RAM and UAV time gated target illumination for LIDAR tracking in tactical platforms. The Phase III effort shall modify the design for ruggedization and integration into a testbed or HEL platform such as the Army’s High Energy Laser Mobile Tactical Truck (HEL-MTT) vehicle. Additional phase III efforts shall include field testing with a fine tracking system in a HEL testbed. Military funding for this Phase III effort would be executed by the US Army Space and Missile Defense Technical Center as part of its Directed Energy research.
Files
| File | Type | Posted |
|---|---|---|
| A17-104.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity