Valves

Added: Sep 10, 2015 9:28 am

 This posting is for 8 NSN(s)

4810006887866  VALVE,SOLENOID

 4810006899920  VALVE,SOLENOID

4810007797550  VALVE,SOLENOID

4810007888391  VALVE,SOLENOID

4810010126086  VALVE,SOLENOID

4810011164869  VALVE,SOLENOID

2910011315719  VALVE ASEMBLY,FUEL

4820011898270  VALVE,PURGE

 ___________________________________________________________________

NSN:006887866

     VALVE, SOLENOID
     STAINLESS STEEL BODY AND TRIM.
     24VDC RATING. MAXIMUM OPERATING PRESSURE 350 PSI
     TEMPERATURE RATING 130 DEGREES F.. NORMALLY
     CLOSED. 1/8 INCH THREADED EXTERNAL TUBE ENDS.
     WHITE VINYL TUBING REQUIRED.

 

     REFERENCE NUMBER:CS187

     REFERENCE NUMBER:CA061

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550310
     VALCOR ENGINEERING CORP DBA 96487 P/N V27200-527

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:006899920

     VALVE, SOLENOID, ALUMINUM BODY. NORMALLY CLOSED.

     REFERENCE NUMBER:CS072

     REFERENCE NUMBER:CA061

     CRITICAL APPLICATION ITEM

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550110
     VALCOR ENGINEERING CORP DBA 96487 P/N V5000-41
     HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692545-2

     PREP FOR DELIVERY

     LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:007797550

      VALVE, SOLENOID.

      ALUMINUM BODY. NORMALLY CLOSED.

     REFERENCE NUMBER:CS072

     REFERENCE NUMBER:CA060

     CRITICAL APPLICATION ITEM

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550100-040
     VALCOR ENGINEERING CORP DBA 96487 P/N V5000-40
     HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692545-1

     PREP FOR DELIVERY

     LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:007888391

     VALVE, SOLENOID.

     24 VOLTS DC.  MATERIAL:
     ALUMINUM ALLOY.  400 PSI, OPERATING
     POSITION: NORMALLY OPEN.  USED IN THE FUEL
     CONTROL SYSTEM OF THE CTC85 SERIES GAS TURBINE
     ENGINE. E/I C-141 AIRCRAFT.

     REFERENCE NUMBER:CA060

     REFERENCE NUMBER:ZD025

     REFERENCE NUMBER:CS187

     CRITICAL APPLICATION ITEM

     TRANSDIGM, INC. DBA AEROCONTROLEX 81833 P/N 6250-1-1
     WESTFIELD HYDRAULICS INC DBA 53730 P/N 570100-01
     VALCOR ENGINEERING CORP DBA 96487 P/N V8500-4000
     HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692546-1

     PREP FOR DELIVERY

     LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:010126086

      VALVE, SOLENOID.

 

     REFERENCE NUMBER:CA060

     CRITICAL APPLICATION ITEM

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550210
     VALCOR ENGINEERING CORP DBA 96487 P/N V5000-123

     PREP FOR DELIVERY

     LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:011164869

     VALVE, SOLENOID

     REFERENCE NUMBER:ZM008

     REFERENCE NUMBER:CS120

     REFERENCE NUMBER:ZD059

     NOTE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUB-CONTRACTORS AT TIME OF
     QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR SUPPLIER WILL REQUIRE JCP
     CERTIFICATION APPROVAL.

     REFERENCE NUMBER:ZD025

     REFERENCE NUMBER:CS187

     REFERENCE NUMBER:ZQA03

     REFERENCE NUMBER:QE002

     REFERENCE NUMBER:CQC04

     CRITICAL APPLICATION ITEM

     HAMILTON SUNDSTRAND CORPORATION 55820 P/N 161798-2
     VALCOR ENGINEERING CORP DBA 96487 P/N V7000-07

     IAW BASIC DRAWING NR 55820 161798
     REVISION NR M   DTD 04/24/2007
     PART PIECE NUMBER: PIECE 161798-2

     IAW REFERENCE QAP 13873 QAP-222
     REVISION NR A   DTD 04/14/2004
     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
     QUP:001  PRES MTHD:AE  CLNG/DRY:1  PRESV MAT:00
     WRAP MAT:00  CUSH/DUNN MAT:NA  CUSH/DUNN THKNESS:A
     UNIT CONT:D3  OPI:M
     INTRMDTE CONT:E5  INTRMDTE CONT QTY:076
     PACK CODE:U
     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
     SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

     VALVE OPENINGS SHALL BE CLOSED WITH NONCORROSIVE
     PLASTIC PLUGS OR END CAPS TO ENSURE NO DEBRIS
     WILL CONTAMINATE VALVE FLOW WHEN IN OPERATION.

     REFERENCE NUMBER:CS284

NSN:011315719

      VALVE ASSEMBLY, FUEL.

     CRITICAL APPLICATION ITEM

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550290
     HAMILTON SUNDSTRAND CORPORATION 55820 P/N 160459-100
     VALCOR ENGINEERING CORP DBA 96487 P/N V27200-630-3

     PREP FOR DELIVERY

     LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA-QUP:001

     SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

NSN:011898270

     VALVE,PURGE.

     REFERENCE NUMBER:ZD071
     REFERENCE NUMBER:ZD003

     REFERENCE NUMBER:CA060

 

     REFERENCE NUMBER:CS187

     CRITICAL APPLICATION ITEM

     WESTFIELD HYDRAULICS INC DBA 53730 P/N 550240
     VALCOR ENGINEERING CORP DBA 96487 P/N V5000-177
     HAMILTON SUNDSTRAND CORPORATION 99167 P/N 163084-1

     PREP FOR DELIVERY

     LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999
     QUP:001  PRES MTHD:ZZ  CLNG/DRY:X  PRESV MAT:XX
     WRAP MAT:XX  CUSH/DUNN MAT:XX  CUSH/DUNN THKNESS:X
     UNIT CONT:XX  OPI:A
     INTRMDTE CONT:E5  INTRMDTE CONT QTY:AAA
     PACK CODE:U
     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
     SPECIAL MARKING CODE:00 -00 No special marking

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

      PACKAGING SHALL BE IAW MIL-V-3
     REFERENCE NUMBER:CS277

************************************************************************************************************

                                                    GLOSSARY

************************************************************************************************************
PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:
ITEM DESCRIPTION TEXT

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
     USED NOR INCORPORATED IN ANY ITEMS TO BE
     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
     SPECIFICATION REQUIREMENTS.

     REFERENCE NUMBER CA061

     ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE
     OFFERS IS NOT AVAILABLE AT THE PROCUREMENT
     AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE
     DATA PACKAGE INCLUDING DATA FOR THE APPROVED
     AND ALTERNATE PART FOR EVALUATION.

     REFERENCE NUMBER CS072

     CLASS 3 THREADS APPLY TO THIS NSN.

     REFERENCE NUMBER CA060

     NO DATA IS AVAILABLE.  THE ALTERNATE OFFEROR IS
     REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
     INCLUDING DATA FOR THE APPROVED AND ALTERNATE
     PART FOR EVALUATION.

     REFERENCE NUMBER ZD025

     MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
     NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
     CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
     UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
     USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
     INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
     AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
     PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
     CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
     A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
     MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

     REFERENCE NUMBER ZM008

     If this NSN provides Contract Data Requirement Lists (CDRLs) as part of
     the Technical Data Package, the line items from this solicitation are
     not to be separately priced.  Offerors must factor into the end item
     unit price all costs associated with the preparation and delivery of the
     data deliverables in the contract.

 

     REFERENCE NUMBER CS120

     NOTE:  THE CITED DRAWING IS A SOURCE CONTROLLED
     DRAWING AND AS OF THE DATE OF THIS SOLICITATION
     ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE
     BEEN APPROVED.  EVEN THOUGH SOURCES AND APPROVED
     PART NUMBERS ARE PROVIDED, THE ITEMS
     FURNISHED MUST MEET THE REQUIREMENTS OF THE
     CITED DRAWING.  OFFERORS WHO ARE INTERESTED IN
     QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE
     ACQUISITION MUST CONTACT THE COGNIZANT DESIGN
     ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED
     DRAWING.
     ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES
     THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT
     THIS TIME.

     REFERENCE NUMBER ZD059

     52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

     FAR CLAUSE 52.246-11 APPLIES.  A QUALITY MANAGEMENT PROGRAM MEETING THE
     REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008
     (EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008;
     OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008
     (EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE
     OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS
     REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES
     WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS
     EXCLUSIONS TO THIS DOCUMENT.
     DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

     4.1 General requirements, [excluding reference to 1.2 and excluding NOTE
     3 c)]
     4.2.1 General, [excluding subparagraph a)]
     4.2.2 Quality manual, [excluding subparagraph a)]
     4.2.3 Control of documents
     4.2.4 Control of records
     5.1 Management commitment
     5.3 Quality policy
     6.2.2 Competence, training and awareness
     6.4 Work environment
     7.1 Planning of product realization, [excluding NOTE 2]
     7.2.1 Determination of requirements related to the product
     7.2.2 Review of requirements related to the product
     7.2.3 Customer communication
     7.3.7 Control of design and development changes
     7.4.1 Purchasing process
     7.4.3 Verification of purchased product
     7.5.1 Control of production and service provision
     7.5.3 Identification and traceability
     7.5.4 Customer property
     7.5.5 Preservation of product
     7.6 Control of monitoring and measuring equipment
     8.1 General, [excluding subparagraph b) and subparagraph c)]
     8.2.2 Internal audit
     8.2.4 Monitoring and measurement of product
     8.3 Control of nonconforming product
     8.5.2 Corrective action
     8.5.3 Preventive action

 

     REFERENCE NUMBER ZQA03

     THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM
     (CSI).

     ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE
     FORWARDED TO THE DSC CONTRACTING OFFICER FOR
     REVIEW AND APPROVAL.
     .
     ALL ITEMS OF SUPPLY SHALL BE MARKED IAW
     MIL-STD-129.  IN ADDITION, EACH UNIT PACK WILL
     BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
     CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S
     CAGE CODE AND PART NUMBER.

     REFERENCE NUMBER QE002

     CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, IS
     NOT AUTHORIZED FOR THIS NSN.

     REFERENCE NUMBER CQC04

     DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT,
     APPLIES.

     REFERENCE NUMBER CS284

     EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
     CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
     CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.

     REFERENCE NUMBER ZD071

     Configuration Change Management - Engineering Change Proposal, Requests
     for Variance (Deviation or Waiver) February 2015
     1.  Requirements
          A.  The Configuration Change Management section of SAE EIA-649-1
     Configuration Management Requirement for Defense Contracts, Paragraph
     3.3, shall be used for Configuration Control of material purchased under
     this contract.
          B.  Furnished item(s) shall conform to the approved configuration
     requirements/revision specified, unless a Pre-Production Request for
     Variance (deviation) or a Post-Production Request for Variance (waiver),
     is processed and approved as provided by Paragraph 3. in this Standard
     Text Object (STO).  Hereafter, the term #Request for Variance (RFV)#
     will also include Requests for Deviations and Waivers.

     2.  The definitions from EIA-649-1 apply to items being procured under
     this solicitation/contract, with the following clarification of
     Deviation & Waiver:
          A.  Pre-Production RFV (previously known as deviation) requests
     permission to produce a product that does not conform to contract
     requirements/documentation for a limited amount of time and for
     specified effectivity.  (A deviation differs from an engineering change
     in that an approved engineering change requires corresponding revision
     of the item's current approved configuration documentation, whereas a
     deviation does not.).
          B.  Post-Production RFV (previously known as waiver) requests
     approval of product found during manufacture, or after having been
     submitted for Government inspection or acceptance, that departs from
     specified requirements, but nevertheless is considered suitable for use
     "as is" or after repair by an approved method.

     3.  Contractor responsibilities.
          A.  An Engineering Change Proposal (ECP) is used to make permanent
     changes in the Government technical data package (TDP).  Pending
     approval of an ECP, contractual relief should be requested in writing by
     the Contractor using a RFV.
          B.  Refer to FAR Part 48 Value Engineering for cost saving
     improvements to the Technical Data Package (TDP).
          C.  All ECPs submitted by the Contractor will be deemed routine.
      If the Contractor considers an ECP as an emergency or urgent; they
     shall include in their ECP submittal an explanation and all applicable
     supporting documentation.  All ECPs will be reviewed for a determination
     on criticality, and, if concurred to be an emergency, the appropriate
     processing time-frame negotiated with the ESAs will be followed and the
     Contractor will be notified of anticipated response time.
          D. For ECPs, Specification Change Notices (SCNs) or RFV, the
     Contractor must submit the applicable documentation listed in
     sub-paragraphs D.(1) through D.(4)to the Administrative Contracting
     Officer(ACO), with an information copy to the Procuring Contracting
     Officer (PCO).  Failure to submit a complete legible package may result
     in return of the ECP/RFV without processing.
               (1) Documentation listed in Paragraph 3.3.1 (for ECPs), 3.3.2
     (RFV), 3.3.3 (for SCNs) or 3.3.4 (for Notices of Revision (NORs)) of the
     latest revision of EIA-649-1.
               (2) DD Form 1692 (current revision) for ECP.
               (3)  DD Form 1694 (current revision) for RFV.
               (4)  DD Form 1695 (current revision) for NOR.

     4.  DLA#s responsibilities:
          A.  Upon receipt of the ECP or RFV, the PCO will ensure that the
     applicable product specialist receives the copy from DCMA.
          B.  Within five (5) working days from the date of receipt of the
     Contractor's ECP or RFV from DCMA, the PS must submit the requests and
     any supporting documentation via a 339 to the appropriate Engineering
     Support Activity (ESA), when applicable.
          C.  Routine ECPs will be processed within 90 days from receipt by
     the ESA.  RFVs will be evaluated and processed within 30 days from
     receipt by the ESA or as negotiated with the ESA.
               (1)  The contractor will be notified in writing of approval by
     the return of an approved copy of the ECP or RFV.  Approval will be
     reflected by signature of the contracting activity or a review activity
     specifically identified in the contract.
               (2)  The contractor will be notified in writing of disapproval
     including reason(s) for disapproval.

     5.  For an approved RFV or an approved ECP, when the request affects the
     Contract, a modification will be issued to the contract incorporating
     the applicable requirement changes.  Only a Contracting Officer is
     authorized to issue a modification incorporating the approved RFV and/or
     ECP.

     6.  Questions regarding the status of previously submitted ECP or RFV
     should be directed to the PCO.

     7.  The submission of an ECP or RFV by the Contractor does not affect
     the required delivery date of the contract.  If a delivery date change
     is needed, it must be negotiated with the Contracting Officer and
     documented via modification to the contract.

     8.  The period of time for evaluation and approval/disapproval of an ECP
     and/or a RFV, as specified in Paragraph 4. C., shall not constitute
     excusable delay in the performance of this Contract by the Contractor or
     in any way relieve the contractor from compliance with the contract
     delivery schedule.  The submission of an ECP and/or RFV by the
     Contractor shall not preclude the Government from exercising its rights
     under any clause of the Contract.  (End)

 

     REFERENCE NUMBER ZD003

     A metal casting process was identified as a means to manufacture this
     item.   Tooling is required to produce a casting.  For sourcing,
     tooling, materials or other information, please contact the appropriate
     assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land
     & Maritime Supply Chains) DSCC.cast.forge@dla.mil

     REFERENCE NUMBER CS277

     "PRESERVATION AND PACKAGING SHALL BE
     I-A-W THE LATEST REVISION OF FEDERAL
     SPECIFICATION MIL-V-3, VALVES, FITTINGS
     & FLANGES."
     "WHEN ZZ IS THE METHOD OF PRESERVATION, USE
     LEVEL "A" PRESERVATION AS CITED IN THE
     COMMODITY SPECIFICATION."