Valves
Added: Sep 10, 2015 9:28 am This posting is for 8 NSN(s) 4810006887866 VALVE,SOLENOID 4810006899920 VALVE,SOLENOID4810007797550 VALVE,SOLENOID4810007888391 VALVE,SOLENOID4810010126086 VALVE,SOLENOID4810011164869 VALVE,SOLENOID2910011315719 VALVE ASEMBLY,FUEL4820011898270 VALVE,PURGE ___________________________________________________________________NSN:006887866 VALVE, SOLENOID STAINLESS STEEL BODY AND TRIM. 24VDC RATING. MAXIMUM OPERATING PRESSURE 350 PSI TEMPERATURE RATING 130 DEGREES F.. NORMALLY CLOSED. 1/8 INCH THREADED EXTERNAL TUBE ENDS. WHITE VINYL TUBING REQUIRED. REFERENCE NUMBER:CS187 REFERENCE NUMBER:CA061 WESTFIELD HYDRAULICS INC DBA 53730 P/N 550310 VALCOR ENGINEERING CORP DBA 96487 P/N V27200-527 PREP FOR DELIVERY LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:006899920 VALVE, SOLENOID, ALUMINUM BODY. NORMALLY CLOSED. REFERENCE NUMBER:CS072 REFERENCE NUMBER:CA061 CRITICAL APPLICATION ITEM WESTFIELD HYDRAULICS INC DBA 53730 P/N 550110 VALCOR ENGINEERING CORP DBA 96487 P/N V5000-41 HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692545-2 PREP FOR DELIVERY LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:007797550 VALVE, SOLENOID. ALUMINUM BODY. NORMALLY CLOSED. REFERENCE NUMBER:CS072 REFERENCE NUMBER:CA060 CRITICAL APPLICATION ITEM WESTFIELD HYDRAULICS INC DBA 53730 P/N 550100-040 VALCOR ENGINEERING CORP DBA 96487 P/N V5000-40 HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692545-1 PREP FOR DELIVERY LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:007888391 VALVE, SOLENOID. 24 VOLTS DC. MATERIAL: ALUMINUM ALLOY. 400 PSI, OPERATING POSITION: NORMALLY OPEN. USED IN THE FUEL CONTROL SYSTEM OF THE CTC85 SERIES GAS TURBINE ENGINE. E/I C-141 AIRCRAFT. REFERENCE NUMBER:CA060 REFERENCE NUMBER:ZD025 REFERENCE NUMBER:CS187 CRITICAL APPLICATION ITEM TRANSDIGM, INC. DBA AEROCONTROLEX 81833 P/N 6250-1-1 WESTFIELD HYDRAULICS INC DBA 53730 P/N 570100-01 VALCOR ENGINEERING CORP DBA 96487 P/N V8500-4000 HONEYWELL INTERNATIONAL INC. DBA 99193 P/N 692546-1 PREP FOR DELIVERY LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:010126086 VALVE, SOLENOID. REFERENCE NUMBER:CA060 CRITICAL APPLICATION ITEM WESTFIELD HYDRAULICS INC DBA 53730 P/N 550210 VALCOR ENGINEERING CORP DBA 96487 P/N V5000-123 PREP FOR DELIVERY LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:011164869 VALVE, SOLENOID REFERENCE NUMBER:ZM008 REFERENCE NUMBER:CS120 REFERENCE NUMBER:ZD059 NOTE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUB-CONTRACTORS AT TIME OF QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR SUPPLIER WILL REQUIRE JCP CERTIFICATION APPROVAL. REFERENCE NUMBER:ZD025 REFERENCE NUMBER:CS187 REFERENCE NUMBER:ZQA03 REFERENCE NUMBER:QE002 REFERENCE NUMBER:CQC04 CRITICAL APPLICATION ITEM HAMILTON SUNDSTRAND CORPORATION 55820 P/N 161798-2 VALCOR ENGINEERING CORP DBA 96487 P/N V7000-07 IAW BASIC DRAWING NR 55820 161798 REVISION NR M DTD 04/24/2007 PART PIECE NUMBER: PIECE 161798-2 IAW REFERENCE QAP 13873 QAP-222 REVISION NR A DTD 04/14/2004 PART PIECE NUMBER: PREP FOR DELIVERY LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A UNIT CONT:D3 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:076 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 VALVE OPENINGS SHALL BE CLOSED WITH NONCORROSIVE PLASTIC PLUGS OR END CAPS TO ENSURE NO DEBRIS WILL CONTAMINATE VALVE FLOW WHEN IN OPERATION. REFERENCE NUMBER:CS284NSN:011315719 VALVE ASSEMBLY, FUEL. CRITICAL APPLICATION ITEM WESTFIELD HYDRAULICS INC DBA 53730 P/N 550290 HAMILTON SUNDSTRAND CORPORATION 55820 P/N 160459-100 VALCOR ENGINEERING CORP DBA 96487 P/N V27200-630-3 PREP FOR DELIVERY LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA-QUP:001 SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.NSN:011898270 VALVE,PURGE. REFERENCE NUMBER:ZD071 REFERENCE NUMBER:ZD003 REFERENCE NUMBER:CA060 REFERENCE NUMBER:CS187 CRITICAL APPLICATION ITEM WESTFIELD HYDRAULICS INC DBA 53730 P/N 550240 VALCOR ENGINEERING CORP DBA 96487 P/N V5000-177 HAMILTON SUNDSTRAND CORPORATION 99167 P/N 163084-1 PREP FOR DELIVERY LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 PRES MTHD:ZZ CLNG/DRY:X PRESV MAT:XX WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X UNIT CONT:XX OPI:A INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 PACKAGING SHALL BE IAW MIL-V-3 REFERENCE NUMBER:CS277************************************************************************************************************ GLOSSARY************************************************************************************************************PACKAGING TEXTTHE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:ITEM DESCRIPTION TEXT REFERENCE NUMBER CS187 CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. REFERENCE NUMBER CA061 ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER CS072 CLASS 3 THREADS APPLY TO THIS NSN. REFERENCE NUMBER CA060 NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. REFERENCE NUMBER ZD025 MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). REFERENCE NUMBER ZM008 If this NSN provides Contract Data Requirement Lists (CDRLs) as part of the Technical Data Package, the line items from this solicitation are not to be separately priced. Offerors must factor into the end item unit price all costs associated with the preparation and delivery of the data deliverables in the contract. REFERENCE NUMBER CS120 NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING. OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. REFERENCE NUMBER ZD059 52.246-11 Higher Level Contract Quality Requirement (Manufacturers) FAR CLAUSE 52.246-11 APPLIES. A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008; A PROGRAM COMPARABLE TO ISO 9001:2008 (EXAMPLE SAE AS 9100), THE FOLLOWING TAILORED VERSION OF ISO 9001:2008; OR A PROGRAM COMPARABLE TO THE TAILORED VERSION OF ISO 9001:2008 (EXAMPLE SAE AS 9003) IS REQUIRED. MIL-I-45208 AND MIL-Q-9858 ARE OBSOLETE AND NO LONGER CONSIDERED SUITABLE WHEN HIGHER LEVEL QUALITY IS REQUIRED. IN THE TAILORED VERSION OF THE ISO 9001:2008, ANY REFERENCES WHICH CITE THE ENTIRE INTERNATIONAL STANDARD ARE INTERPRETED AS EXCLUSIONS TO THIS DOCUMENT. DLA TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008 4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)] 4.2.1 General, [excluding subparagraph a)] 4.2.2 Quality manual, [excluding subparagraph a)] 4.2.3 Control of documents 4.2.4 Control of records 5.1 Management commitment 5.3 Quality policy 6.2.2 Competence, training and awareness 6.4 Work environment 7.1 Planning of product realization, [excluding NOTE 2] 7.2.1 Determination of requirements related to the product 7.2.2 Review of requirements related to the product 7.2.3 Customer communication 7.3.7 Control of design and development changes 7.4.1 Purchasing process 7.4.3 Verification of purchased product 7.5.1 Control of production and service provision 7.5.3 Identification and traceability 7.5.4 Customer property 7.5.5 Preservation of product 7.6 Control of monitoring and measuring equipment 8.1 General, [excluding subparagraph b) and subparagraph c)] 8.2.2 Internal audit 8.2.4 Monitoring and measurement of product 8.3 Control of nonconforming product 8.5.2 Corrective action 8.5.3 Preventive action REFERENCE NUMBER ZQA03 THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM (CSI). ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND APPROVAL. . ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. REFERENCE NUMBER QE002 CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, IS NOT AUTHORIZED FOR THIS NSN. REFERENCE NUMBER CQC04 DLAD 52.246-9003, MEASURING AND TEST EQUIPMENT, APPLIES. REFERENCE NUMBER CS284 EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. REFERENCE NUMBER ZD071 Configuration Change Management - Engineering Change Proposal, Requests for Variance (Deviation or Waiver) February 2015 1. Requirements A. The Configuration Change Management section of SAE EIA-649-1 Configuration Management Requirement for Defense Contracts, Paragraph 3.3, shall be used for Configuration Control of material purchased under this contract. B. Furnished item(s) shall conform to the approved configuration requirements/revision specified, unless a Pre-Production Request for Variance (deviation) or a Post-Production Request for Variance (waiver), is processed and approved as provided by Paragraph 3. in this Standard Text Object (STO). Hereafter, the term #Request for Variance (RFV)# will also include Requests for Deviations and Waivers. 2. The definitions from EIA-649-1 apply to items being procured under this solicitation/contract, with the following clarification of Deviation & Waiver: A. Pre-Production RFV (previously known as deviation) requests permission to produce a product that does not conform to contract requirements/documentation for a limited amount of time and for specified effectivity. (A deviation differs from an engineering change in that an approved engineering change requires corresponding revision of the item's current approved configuration documentation, whereas a deviation does not.). B. Post-Production RFV (previously known as waiver) requests approval of product found during manufacture, or after having been submitted for Government inspection or acceptance, that departs from specified requirements, but nevertheless is considered suitable for use "as is" or after repair by an approved method. 3. Contractor responsibilities. A. An Engineering Change Proposal (ECP) is used to make permanent changes in the Government technical data package (TDP). Pending approval of an ECP, contractual relief should be requested in writing by the Contractor using a RFV. B. Refer to FAR Part 48 Value Engineering for cost saving improvements to the Technical Data Package (TDP). C. All ECPs submitted by the Contractor will be deemed routine. If the Contractor considers an ECP as an emergency or urgent; they shall include in their ECP submittal an explanation and all applicable supporting documentation. All ECPs will be reviewed for a determination on criticality, and, if concurred to be an emergency, the appropriate processing time-frame negotiated with the ESAs will be followed and the Contractor will be notified of anticipated response time. D. For ECPs, Specification Change Notices (SCNs) or RFV, the Contractor must submit the applicable documentation listed in sub-paragraphs D.(1) tough D.(4)to the Administrative Contracting Officer(ACO), with an information copy to the Procuring Contracting Officer (PCO). Failure to submit a complete legible package may result in return of the ECP/RFV without processing. (1) Documentation listed in Paragraph 3.3.1 (for ECPs), 3.3.2 (RFV), 3.3.3 (for SCNs) or 3.3.4 (for Notices of Revision (NORs)) of the latest revision of EIA-649-1. (2) DD Form 1692 (current revision) for ECP. (3) DD Form 1694 (current revision) for RFV. (4) DD Form 1695 (current revision) for NOR. 4. DLA#s responsibilities: A. Upon receipt of the ECP or RFV, the PCO will ensure that the applicable product specialist receives the copy from DCMA. B. Within five (5) working days from the date of receipt of the Contractor's ECP or RFV from DCMA, the PS must submit the requests and any supporting documentation via a 339 to the appropriate Engineering Support Activity (ESA), when applicable. C. Routine ECPs will be processed within 90 days from receipt by the ESA. RFVs will be evaluated and processed within 30 days from receipt by the ESA or as negotiated with the ESA. (1) The contractor will be notified in writing of approval by the return of an approved copy of the ECP or RFV. Approval will be reflected by signature of the contracting activity or a review activity specifically identified in the contract. (2) The contractor will be notified in writing of disapproval including reason(s) for disapproval. 5. For an approved RFV or an approved ECP, when the request affects the Contract, a modification will be issued to the contract incorporating the applicable requirement changes. Only a Contracting Officer is authorized to issue a modification incorporating the approved RFV and/or ECP. 6. Questions regarding the status of previously submitted ECP or RFV should be directed to the PCO. 7. The submission of an ECP or RFV by the Contractor does not affect the required delivery date of the contract. If a delivery date change is needed, it must be negotiated with the Contracting Officer and documented via modification to the contract. 8. The period of time for evaluation and approval/disapproval of an ECP and/or a RFV, as specified in Paragraph 4. C., shall not constitute excusable delay in the performance of this Contract by the Contractor or in any way relieve the contractor from compliance with the contract delivery schedule. The submission of an ECP and/or RFV by the Contractor shall not preclude the Government from exercising its rights under any clause of the Contract. (End) REFERENCE NUMBER ZD003 A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil REFERENCE NUMBER CS277 "PRESERVATION AND PACKAGING SHALL BE I-A-W THE LATEST REVISION OF FEDERAL SPECIFICATION MIL-V-3, VALVES, FITTINGS & FLANGES." "WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL "A" PRESERVATION AS CITED IN THE COMMODITY SPECIFICATION."
SPE7MX15R0134 Defense Logistics Agency Land and Maritime
9/10/15, 9:28 AM