USCGC HAWKSBILL & USCGC BLACKFIN - Dry Dock Repairs

The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 1, proposes to contract the Dry Dock Repairs of USCGC HAWKSBILL (WPB-87312) and USCGC BLACKFIN (WPB-87317), both 87' Patrol Boat Cutters. All work will be done at the CONTRACTOR'S CERTIFIED FACILITY. Per PACAREAINST 3100.1F, these vessels are geographically restricted to the United States West Cost San Francisco Bay and South. The performance periods will be as follows:

(1) USCGC HAWKSBILL forty-five (45) calendar days with a start date on or about 11 JAN 2012 through 24 FEB 2012;

(2) USCGC BLACKFIN forty-five (45) calendar days with a start date on or about 4 APR 2012 through 18 MAY 2012.

Work items include and are not limited to: Routine Drydocking; Provide Temporary Services; Provide Telephone Service; Perform Ultrasonic Thickness Measurements; Modify Forepeak (EC 087-A-033); Galley/Messdeck Bilge Access, Preserve, Partial; Clean and Inspect Dirty Oil Tank; Clean and Inspect Oily Water Tank; Clean and Inspect Tanks (MP Fuel Service); Inspect, Preserve, and Renew Electrical Matting-Pilothouse Deck (Aluminum); Renew Depth Sounder Capastic Fairing, Install Fuel Station Weather Tight Door (TCTO TB6000); Realign Main Engine Reduction Gear; Remove, Inspect, and Reinstall Propulsion Shafts; Repair Propulsion Shaft; Straighten Propulsion Shaft; Renew Intermediate Water-Lubricated Propulsion Shaft Bearing; Renew Aft Water-Lubricated Propulsion Shaft Bearing; Renew Intermediate Bearing Carrier; Renew Aft Bearing Carrier; Preserve Stern Tube Interior Surfaces; Repair Stern Tube Interior Surfaces; Remove, Inspect and Reinstall Propellers; Perform Propeller Minor Reconditioning and Repairs; Renew Fathometer Transducer; Clean and Inspect Speed Log Skin Valve Assembly; Clean, Inspect, and Repair Sea Water System (Sea Valves, Strainers, Piping); Install Placeholder for Fire Hose Camelbacks (TCTO TB3000); Remove, Inspect, and Reinstall Rudder Assemblies; Inspect RHIB Notch Skid Pads; Renew RHIB Notch Skid Pad Studs; Remove, Inspect, and Reinstall Stern Launch Door; Clean and Inspect Grey Water Holding Tank; Clean and Inspect Sewage Holding Tank; Clean and Flush Grey Water Piping; Clean and Flush Sewage Piping; Preserve Underwater Body (100%); Preserve Underwater Body (Partial - 33%); Renew Cathodic Protection Zincs; GFP Report; and Laydays.

On or about 29 NOV 2011, a Request for Proposal (RFP) will be available electronically at http://www.fedbizopps.gov. This will be a Total Small Business Set-aside procurement. Only 100% certified small business contractors may submit a proposal. The NAICS code assigned to this procurement will be 336611 with a size standard of less than 1,000 employees.

The solicitation, specifications and other pertinent information will be posted at www.fbo.gov. A drawing CD may be requested via email to Bernie.c.caguiat@uscg.mil.