USCGC abbie burgess dry dock repairs FY16

The United States Coast Guard Surfaces Force Logistic Center, intends to issue a Commercial Request for Quote (RFQ) for DRYDOCK Repairs to the USCGC ABBIE BURGESS. The acquisition will be solicited as a Total Small Business Set-Aside. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about January 4, 2016. The solicitation will be issued electronically on the FEDBIZOPPS web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. Please sign up for the Auto Notification service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. If you have questions regarding FEDBIZOPPS, contact Sandra Martinez at (757) 628-4591 or email sandra.a.martinez@uscg.mil. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail sandra.a.martinez@uscg.mil

REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following:

Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC ABBIE BURGESS (WLM 553) is a 175 Foot Buoy Tender. The home pier is located at 54 Tillson Ave, Rockland, ME 04841

SCOPE OF WORK: This vessel requires drydock repairs to include but not limited to the following work items:

WORK ITEM 1: Hull Plating (U/W Body), Inspect
WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing
WORK ITEM 3: Appendages (U/W), Leak Test
WORK ITEM 4: Appendages (U/W) - Internal, Preserve - Option
WORK ITEM 5: Chain Lockers, Clean and Inspect
WORK ITEM 6: Tanks (MP Fuel Stowage and Overflow), Clean and Inspect
WORK ITEM 7: Voids (Non-Accessible), Leak Test
WORK ITEM 8: Voids (Non-Accessible), Internal Surfaces, Preserve - Option
WORK ITEM 9: Tanks (Hydraulic Oil Stowage and Service), Clean and Inspect
WORK ITEM 10: Tanks (Lube Oil), Clean and Inspect
WORK ITEM 11: Tanks (Dirty Oil and Waste), Clean and Inspect
WORK ITEM 12: Z-Drive Propulsion Units, Overhaul
WORK ITEM 13: Ship Service Diesel Generator (SSDG) Exhaust Piping, Commercial Clean
WORK ITEM 14: Fathometer Transducer, Renew
WORK ITEM 15: Underwater (Speed) Log Transducer(s), Renew
WORK ITEM 16: Sea Strainers - Duplex (All Sizes), Overhaul
WORK ITEM 17: Sea Bay, Clean and Inspect
WORK ITEM 18: Sea Bay, Preserve 100% - Option
WORK ITEM 19: Thruster Unit (General), Overhaul
WORK ITEM 20: Hydraulic Crossdeck Winches, Inspect and Service
WORK ITEM 21: Hydraulic Inhaul Winch, Inspect and Service
WORK ITEM 22: Mechanical Chain Stoppers, Inspect and Service
WORK ITEM 23: Anchor Windlass, Inspect and Service
WORK ITEM 24: Anchor Chain(s) and Ground Tackle, Inspect and Repair
WORK ITEM 25: Warping Capstan (Aft), Inspect and Service
WORK ITEM 26: Tanks (Dirty Oil and Waste), Preserve "100%" - Option
WORK ITEM 27: Tanks (Dirty Oil and Waste), Preserve "Partial" - Option
WORK ITEM 28: U/W Body, Preserve (100%)
WORK ITEM 29: Hull Plating Freeboard, Preserve "100%"
WORK ITEM 30: Cathodic Protection / Zinc Anodes, Renew
WORK ITEM 31: Drydock
WORK ITEM 32: Temporary Services, Provide - Cutter
WORK ITEM 33: Sea Trial Performance, Support, Provide
WORK ITEM 34: M240 Gun Mounts, Ready Service Locker, and Ammunition Stowage Box, Install
WORK ITEM 35: Bilges, Preserve
WORK ITEM 36: Buoy Deck Cleats, Modify
WORK ITEM 37: Power Assisted Griping System, Remove
WORK ITEM 38: Buoy Crane Main Winch, CT Function, Remove
WORK ITEM 39: Chain Locker, Preserve 100% - Option
WORK ITEM 40: Decks - Exterior (Buoy or Construction Deck), Preserve 100%
WORK ITEM 41: Tanks (Sewage Holding), Preserve "Partial" - Option
WORK ITEM 42: Deck Covering, Wet/ Dry, Seal
WORK ITEM 43: Decks - Exterior, Preserve ("MIL-Spec/Flight Deck" System)
WORK ITEM 44: Superstructure, Preserve "100%"
WORK ITEM 45: Hull and Structural Plating (General) -10.2-Pound Steel, Repair - Option
WORK ITEM 46: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair - Option
WORK ITEM 47: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair - Option
WORK ITEM 48: Hull and Structural Plating (General) - 20.5-Pound Steel Plate, Repair - Option
WORK ITEM 49: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Repair - Option
WORK ITEM 50: Hull and Structural Plating (General) - 7.65-Pound Steel Plate, Repair - Option
WORK ITEM 51: Main Diesel Engine (MDE) Exhaust Piping, Commercial Clean
WORK ITEM 52: Scuttles (External), Renew
WORK ITEM 53: Deck Covering (Interior Wet/Dry), Renew
WORK ITEM 54: Sewage Holding Tank Firemain Washdown Nozzle, Renew
WORK ITEM 55: Decks (All Interior) Pump Room, Preserve

Anticipated Period of Performance: The period of performance is anticipated to be for Ninety (90) calendar days with a start date of 04 May 2016 - 13 Jul 2016
NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees.

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.
This solicitation is Subject to Availability of Funds.

All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above