USCG ANT colfax (ANB 643503) 2015 drydock repair

The United States Coast Guard Surface Force Logistics Center intends to issue a Commercial Request for Quote (RFQ) for the Dry Dock and Repair of USCG ANT COLFAX 64' Aids To Navigation (ANB) 643503. The acquisition will be set-aside for Small Businesses. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12 Acquisition of Commercial Items, FAR Par 13.3 Simplified Acquisition Methods and Subpart 13.5 - Test Program for Certain Commercial Items. The acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about October 17, 2014. This Requirement will be evaluated using past performance as an evaluation factor. The standard NAICS is 336611. All work will be performed at the contractor's facility. The performance period will be One-Hundred and Twenty-One (121) calendar days with a start date on or about 06 January 2015.

GEOGRAPHIC RESTRICTION: In accordance with the U. S. Coast Guard Atlantic Area Instruction 3100.1D, the vessel is restricted to an area no greater than 350 nautical miles from the ANB's home station, on navigable waterways and no open water transits.

Home Station: USCG ANT Colfax, 350 Control House Road, Colfax, LA 71417.

The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at https://fbo.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. FEBBIZOPS also contains an option for automation notification service. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail to janet.m.delaney@uscg.mil.

The scope of work for this acquisition is but not limited to:
General Welding, Provide
Hull Plating (U/W Body), Ultrasonic Testing
Voids (Non-Accessible), Leak Test
Tanks (MP Fuel Service), Clean and Inspect
Accessible Spaces, Inspect
Tanks (Ballast), Clean and Inspect
Voids (Accessible), Clean and Inspect
Mast, Inspect
Propeller Shafts, Remove, Inspect and Install
Water Lubricated Shaft Bearings, Renew
Propellers, Remove, Inspect, and Reinstall
Grid Coolers, Clean, Inspect and Hydro
Exhaust Muffler, Clean and Inspect
Main Engine and Ship Service Generator Uptakes, Clean and Inspect
Sea Valves, Renew
Diesel Tank, Refuel
Fuel Valves, Overhaul or Renew
Steering Hydraulic Oil Tank, Clean and Inspect
Rudder, Remove, Inspect and Reinstall
Chain Stopper, Overhaul
Spuds and Spud Wells, Inspect and Preserve
Sewage Vacuum Collection Tanks, Clean and Inspect
Hull Plating Freeboard, Preserve -"100%"
Cathodic Protection Zincs, Renew
Marine Chemist Services, Provide
Drydocking
Temporary Services, Provide
Sea Trial Performance, Support, Provide
Hoses, Renew
Fixed CO2 FF Bottles, Inspect and Hydrostatic Test
Buoy Handling System Maintenance, Level 2, Perform
Cargo Handling Fittings, Inspect
Spud Winches, Inspect & Service
Decks - Exterior (Buoy), Preserve 100 Percent
Pottable Water Tanks Renew
U/W Body, Preserve 100%
Composite Labor Rate
Lay Days
GFP Report

For further information or questions regarding the solicitation, please contract Janet M. Delaney via email at janet.m.delaney@uscg.mil.