Upgrade Controls on the Electron Beam Welder 670

Provide all labor, parts, tools and material necessary to upgrade the existing Electron Beam Welder (EBW) 670 control system to include, but not limited to, software development and modification, physical installation of new control mechanical and electrical components, removal of existing EBW 670 control system, on-site startup and acceptance testing of upgraded EBW 670, training and documentation. The installation, startup, testing and training shall be performed by the contractor on site at Bldg 108, Anniston Army Depot, Anniston, AL 36201. The contractor shall upgrade the existing EBW 670 control system to match that of the control system of EBW 918. This is a SOLE SOURCE procurement to PTR Precision Technologies who owns the proprietary technical/design of the EBW. We encourage any firm that recognizes this item/requested service and can provide supporting evidence in writing that they can provide this item/service to identify themselves. They may be considered for future requirements. North American Industry Classification System Code is 333992; size standard is 1,250. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: https://www.fbo.gov (Federal Business Opportunities) Estimated issue date of solicitation is 16 May 2018. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Ginger Homesley, 256-235-6614, E-mail: ginger.s.homesley.civ@mail.mil..

Provide all labor, parts, tools and material necessary to upgrade the existing Electron Beam Welder (EBW) 670 control system to include, but not limited to, software development and modification, physical installation of new control mechanical and electrical components, removal of existing EBW 670 control system, on-site startup and acceptance testing of upgraded EBW 670, training and documentation. The installation, startup, testing and training shall be performed by the contractor on site at Bldg 108, Anniston Army Depot, Anniston, AL 36201. The contractor shall upgrade the existing EBW 670 control system to match that of the control system of EBW 918. This is a SOLE SOURCE procurement to PTR Precision Technologies who owns the proprietary technical/design of the EBW. We encourage any firm that recognizes this item/requested service and can provide supporting evidence in writing that they can provide this item/service to identify themselves. They may be considered for future requirements. North American Industry Classification System Code is 333992; size standard is 1,250. This solicitation will be issued electronically in accordance with FAR 4.501, 5.102(a)(7) and 14.205-1(c); therefore hardcopies will not be provided. Proposals submitted must be in electronic format as stated in the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: https://www.fbo.gov (Federal Business Opportunities) Estimated issue date of solicitation is 16 May 2018. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. POINT OF CONTACT: Ginger Homesley, 256-235-6614, E-mail: ginger.s.homesley.civ@mail.mil.