UHP Water Jet Blasting Services
Open Solicitation Posted
- Solicitation number
- 70ZU0327Q62201Y00
- Agency
- Not on record
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- Place of performance
- Curtis Bay, Maryland 21226, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard Yard, Baltimore, Maryland, is soliciting Ultra High Pressure (UHP) water jet blasting and supplementary vacuum-assisted mechanical and hand tooling services for vessel surface preparation, with proposals due December 28, 2026. The Set Aside line reads No Set-Aside Used.
Performance is at the Curtis Bay Industrial Area, Baltimore, MD 21226, on Coast Guard vessels scheduled for Yard availabilities, both dry-docked and pier-side. Covered vessels include 327' Eagle, 270' and 210' Medium Endurance Cutters, 225' Seagoing Buoy Tenders, 175' Coastal Buoy Tender, 154' Sentinel-Class, 140' Ice Breakers, 110' and 87' Patrol Boats, and 75' and 65' Tender/Barge configurations, plus Foreign Military Sales and Other Government Agency vessels.
Offerors must be experienced in UHP water jet blasting to NACE/SSPC WJ-2/L and maintain an active SSPC QP1 company certification. Work runs at 36,000 to 40,000 PSI. Accessible areas must reach WJ-2/L, with up to 5 percent allowance for physically inaccessible areas. Inaccessible areas or complex geometries require SSPC-SP11 using vacuum-assisted mechanical power tools, with SP3 or SP2 if SP11 cannot be achieved. Mechanical power tooling is estimated at 10 percent of requested surface area for superstructure and weather deck task orders. Contractors must keep approximately six inches of clearance from sensitive areas such as hoses, piping, and electronics. A minimum of one SSPC C13-certified On-Site Manager/Supervisor is required as key personnel. The contractor furnishes all equipment, including three vacuum blast head units (similar to Flow "Hydro-Cat") up to 40,000 psi, power and hand tools, man lifts, process water storage tanks, and spill containment. The contractor must capture 100 percent of process liquids and solids with zero discharge and assumes sole liability for environmental violations and fines. Permits include NPDES, Title V Air, and storm water. Employees with repeat facility access must comply with RAPIDGate. Services start within 72 hours of task order notification, and crews report to the work site within 24 hours.
The contract is an IDIQ with one 12-month base year and four 12-month option periods. Each period carries quantities of 40,000 SF for underwater body, freeboard, and other pedestals; 15,000 SF for superstructure, stack, and mast; 10,000 SF for all decks; and 4,000 SF for bulkheads and other exteriors. The minimum guaranteed award is $500.00, and the ceiling is established at award. Evaluation uses Lowest Price Technically Acceptable, with the Government intending to award at least two contracts, and additional awards possible if in the Government's best interest.
Proposals go by email to Linda.B.Lassiter@uscg.mil in three volumes: Technical (not to exceed 5 pages, with certifications, plans, and equipment lists), Past Performance (three recent and relevant references), and Price (all CLINs). The technical volume includes a Quality Control Plan, Containment Plan, and Cleanup and Disposal Plan. Work requires compliance with Department of Labor Wage Determination No. 2015-4265 (Revision 35, dated August 22, 2026). Insurance requirements are workers' compensation per state and local law, general liability of $500,000 bodily injury and $100,000 property damage per occurrence, and automobile liability of $500,000 bodily injury per occurrence, $200,000 per person, and $20,200 property damage. Payment terms are NET 30 through the Treasury Invoice Processing Platform. NAICS is 336611, Ship Building and Repairing, and PSC is J019.
Notice text
The U.S. Coast Guard Yard, Baltimore, MD, has a requirement for Ultra High Pressure (UHP) Water Jet Blasting Services and supplementary vacuum-assisted mechanical/hand tooling services. Performance is required on various vessels that are scheduled for Yard Availabilities, both dry-docked and pier-side. The vessel lengths vary and include 327’ Eagle, 270' Medium Endurance Cutters, 225' Seagoing Buoy Tenders, 210' Medium Endurance Cutters, 175' Coastal Buoy Tender, 154’ Sentinel-Class, 140' Ice Breakers, 110' and 87' Patrol Boats, 75’ and 65' Tender/Barge configurations, as well as Foreign Military Sales and Other Government Agency (OGA) vessels.
UHP water jet blasting will be used to remove coatings and contaminants from designated U.S. Coast Guard vessel surfaces to achieve the WJ-2/L surface preparation standard on targeted vessel surfaces. Offerors must be experienced with UHP water jet blasting surfaces to National Association of Corrosion Engineers International (NACE)/The Society for Protective Coatings (SSPC) Surface Preparation Standard WJ-2/L.
Offerors must maintain an active Society for Protective Coatings (SSPC) QP1 certification and must provide, at a minimum, one SSPC-C13 certified person on-site for managing personnel while performing these services.
Files
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| CGC frederick hatch U/W hull cleaning and optional zinc repair | — | Total Small Business | |
| USCG STA SAN francisco (45667) FY27 DD repairs | — | Total Small Business | |
| Dock-side (DS): USCGC WAESCHE Quarter 2 FY27 Repair | — | Total Small Business | |
| CGC manta DD FY27 | — | Total Small Business | |
| USCGC MORRO BAY (WTGB-108) — Fuel Oil Tanks and Bilge Cleaning and Inspection | — | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity