TS-405 Vessel
Open Special Notice Posted
- Solicitation number
- 80NSSC27949127Q
- Agency
-
Shared Services Center
National Aeronautics and Space Administration
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 332420 Metal Tank (Heavy Gauge) Manufacturing
- PSC
- 5430 Storage Tanks
- Place of performance
- Stennis Space Center, Mississippi 39529, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
NASA's Shared Services Center (NASA/NSSC) intends to award a sole-source contract for the TS-405 Vessel to Prentex Alloy Fabricators, Inc. of Sunnyvale, Texas, under FAR 12.102(a), and is accepting capability statements through 4:00 p.m. Central Standard Time on November 19, 2026. The notice states that Prentex is the sole provider of the TS-405 Vessel and that no set-aside is used. NASA is requesting only capability statements, which will be evaluated solely to determine whether to conduct the procurement competitively. Quotes submitted in response will not be considered. Vendors must reference the notice ID, submit in writing, and oral communications are not acceptable. The notice lists performance at NASA Stennis Space Center under FAR Part 12 commercial procedures, NAICS 332420.
The attached SOW summary describes fabrication of two 200-gallon, 2,000 psig stainless steel 304/304L pressure vessels for monomethyl hydrazine and nitrogen tetroxide service, matching existing vessels S/N E-250 and E-251 and built to ASME Section VIII, Division 1, with a target lead time of 20 to 30 weeks after award. Per the SOW summary, delivery is to NASA White Sands Test Facility in Las Cruces, New Mexico. Tracy Bremer, Procurement Specialist, is the primary point of contact at tracy.g.bremer@nasa.gov.
Notice text
SPECIAL NOTICE:
VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT.
NASA/NSSC has a requirement for TS-405 Vessel.
NASA/NSSC intends to issue a sole source contract to PRENTEX ALLOY FABRICATORS, INC, 390 Clay
RD, Sunnyvale, Texas 75182-9711 under the authority of FAR 12.102(a). It has been determined that
PRENTEX ALLOY FABRICATORS, INC is the sole provider of TS-405 Vessel.
NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Stennis Space
Center (SSC).
The Government intends to acquire Commercial items or services using the provisions, clauses and procedures
prescribed in FAR Part 12 for Commercial
The NAICS Code for this procurement is 332420.
Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the
identified point of contact not later than 4:00 p.m. Central Standard Time on 11/19/2026. Such
capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this
procurement on a competitive basis. A determination by the Government not to compete this proposed effort on
a full and open competition basis, based upon responses to this notice, is solely within the discretion of the
government.
Oral communications are not acceptable in response to this notice.
NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by
NASA’s Technical End User Team. We are currently only requesting Capability Statements.
NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this
acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-
Advocate-Listing.pdf .
Primary Point of Contact:
Tracy Bremer
Procurement Specialist
tracy.g.bremer@nasa.gov
Files
| File | Type | Posted |
|---|---|---|
| SOW.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Silicone Free Annealing Oven | Shared Services Center | No set-aside | |
| Transducers needed for artemis III servicing | Shared Services Center | 8(a) Sole Source | |
| SS 304 Transitions for Enable Heat Project | Shared Services Center | No set-aside | |
| Repair and replacement of existing MTS lab Equipment | Shared Services Center | No set-aside | |
| 30 lbs of M55J Carbon Prepreg 12" wide fiber tape embedded with F6 cyanate ester resin; 30 lbs of K13C2U Carbon Prepreg 12" wide fiber tape embedded with F6 cyanate ester resin | Shared Services Center | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity