SOW.pdf

PDF 350 KB Posted

Attached to
TS-405 Vessel
Solicitation number
80NSSC27949127Q
Issued by

About this file

This is a Statement of Work for the fabrication and delivery of two 200-gallon, 2,000 psig pressure vessels by NASA White Sands Test Facility (WSTF). The vendor, Prentex Alloy Fabricators of Sunnyvale, Texas, shall fabricate two identical stainless steel 304/304L pressure vessels designed for monomethyl hydrazine (MMH) and nitrogen tetroxide (N₂O₄) service. The vessels must match the exact configuration of existing vessels (S/N E-250 and E-251) used in TS403, with a nominal capacity of 200 gallons each, maximum allowable working pressure of 2,000 psig, and design temperature range of -20°F to +150°F. All fabrication, inspection, nondestructive examination, hydrostatic testing, stamping, and National Board registration must comply with ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. The target lead time is approximately 20 to 30 weeks after award, subject to confirmed production schedule.

Deliverables include fabrication submittal drawings and code calculations due prior to fabrication, monthly status updates with schedule and risk information, a test package with hydrostatic test results and NDE records due before shipment, and a final data package with as-built drawings, material certifications, ASME data report, and National Board registration due with shipment. The two completed vessels, preserved and protected for transit to prevent damage and maintain cleanliness for MMH/N₂O₄ service, are due at delivery to NASA WSTF, 12600 NASA Road, Las Cruces, NM 88012, Attention: Erin Woods. NASA acceptance is contingent upon review of the final data package, verification of conformance to approved configuration and code requirements, satisfactory testing completion, and receipt without unresolved damage or nonconformance. No substitution or design deviation is permitted without prior written NASA approval.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

NASA | WHITE SANDS TEST FACILITY

Pre-Decisional Draft | Acquisition Planning

STATEMENT OF WORK

Fabrication and Delivery of Two 200-Gallon, 2,000 psig Pressure Vessels

Delivery Location

NASA White Sands Test Facility (WSTF) 12600 NASA Road Las Cruces, NM 88012

Fluid Service Compatible with Monomethyl Hydrazine (MMH), Nitrogen Tetroxide (N₂O₄) service

Quantity Two - identical pressure vessels

Acquisition Basis Exact configuration of vessels built for TS403 (reference data plates on following pages)

Target Lead Time Approximately 20 to 30 weeks after award, subject to confirmed production schedule

Vendor Prentex Alloy Fabricators, Sunnyvale Texas

1. Background NASA is reactivating TS405 to support mission critical propulsion test capability at WSTF. The project requires two pressure vessels for the TS405 propellant skid. The required vessels are to duplicate the proven vessel configuration already in service at TS403.

2. Objective Provide two complete, ASME code stamped pressure vessels that match the TS403 vessel configuration (S/N, E- 250, E-251). The vendor shall fabricate, test, document, preserve, and ship the vessels to WSTF.

3. Technical Requirements Quantity: Two identical pressure vessels Nominal capacity: 200 gallons each Maximum allowable working pressure/design pressure: 2,000 psig (minimum).

Design temperature range: -20 °F to +150 °F.

Material: Stainless steel 304/304L.

Fluid Service: Monomethyl hydrazine (MMH), Nitrogen Tetroxide (N₂O₄). All wetted materials, fabrication processes, cleanliness provisions, etc. shall be suitable for the specified hypergolic propellant service.

Configuration: Match the NASA approved TS403 vessel configuration (S/N – E-250, 251), vendor to provide submittal drawing to be approved by NASA prior to fabrication.

Code: Design, manufacture, inspect, test, and stamp in accordance with the applicable edition of ASME Boiler and Pressure Vessel Code, Section VIII, Division 1. Register each vessel with the National Board.

Interchangeability: Critical dimensions, nozzle locations, interfaces, materials, and mounting features shall be compatible with the existing NASA configuration unless NASA approves a deviation in writing.

No substitution or design deviation is permitted without prior written NASA approval.

NASA | WHITE SANDS TEST FACILITY

Pre-Decisional Draft | Acquisition Planning

4. Scope of Work

1. Review the NASA furnished Statement of Work information and identify any conflicts before fabrication.

2. Prepare and submit fabrication drawings and code calculations for NASA review.

3. Procure materials with traceability appropriate to the governing code.

4. Fabricate, inspect, nondestructively examine as required, hydrostatically test, stamp, and register each vessel.

5. Provide protective preparation for shipment and transport the completed vessels to WSTF.

5. Deliverables Deliverable Content Due

Fabrication submittal Drawings, design calculations, material list, and planned code compliance approach

Prior to fabrication

Status updates Schedule and risk updates Monthly or upon material change

Test package Hydrostatic test results, required NDE records, and code documentation

Before shipment

Final data package

As-built drawings, material certifications, ASME data report, National Board registration, certificates, and shipping records

With shipment

Hardware Two completed vessels, preserved and protected for transit

At delivery

6. Inspection and Acceptance NASA acceptance will be based on review of the final data package, verification that each vessel conforms to the approved configuration and code requirements, satisfactory completion of required testing, and receipt at WSTF without unresolved damage or nonconformance. NASA reserves the right to witness the hydrostatic test with reasonable notice.

7. Schedule and Shipping The vendor shall provide its earliest achievable delivery schedule. The planning target is approximately 20 to 30 weeks after award. The completed vessels shall be shipped to: NASA White Sands Test Facility (WSTF), 12600 NASA Road, Las Cruces, NM 88012, Attention: Erin Woods. Shipping method, lifting points, supports, blocking, and protective measures shall prevent damage and preserve cleanliness and configuration for MMH/N₂O₄ service.

File details come from the government source that posted it. Updated .