The Federal Aviation Administration (FAA) has a requirement for ELECTRICAL WORK and REPAVE PARKING LOT & ENTRANCE DRIVE at an FAA facility near Broadview Heights, OH.

Award Notice Posted

Solicitation number
DTFAAC-16-R-06033
Agency
Awarded
to Chagrin Valley Paving Inc.
Set-aside
Total Small Business

Opportunity facts

Contract number
DTFAAC17C00016 Federal contract award
NAICS code
238110 Poured Concrete Foundation and Structure Contractors
PSC
Not on record
More information

Notice details come from SAM.gov. Updated .

Notice text

3 versions

Update #3 · Latest ·

***A001 has been issued to extend the closing date until 10/31/2016.



The Federal Aviation Administration (FAA) has a requirement for ELECTRICAL WORK and REPAVE PARKING LOT & ENTRANCE DRIVE at an FAA facility near Broadview Heights, OH. The Contractor shall provide all labor, materials (unless noted otherwise in the contract documents), and specialized equipment as necessary to perform the work described in the Statement of Work.



It is anticipated that a firm-fixed-price type construction contract will be awarded as a result of this solicitation.



Site visit instructions can be found in (Section L, 3.2.2.3-63 Site Visit (Construction), pg 37.



ALL QUESTIONS REGARDING THE PROJECT/SPECIFICATIONS/PLANS MUST BE RECEIVED IN WRITING (DAVID.SHAW@FAA.GOV) NO LATER THAN 5:00 P.M. CST ON OCTOBER 12, 2016, TO ALLOW FOR RESPONSES TO BE PROVIDED PRIOR TO DUE DATE FOR RECEIPT OF PROPOSALS.



Contractors must be registered with the System for Award Management, www.sam.gov on the date established for receipt of offers (October 21, 2016). Reference AMS Clause 3.3.1-33, paragraph (d), “if the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered Offeror.â€



In addition, offerors must complete and return the attached Business Declaration Form. The form is provided as a separate document under this announcement. The FAA reserves the right to review and verify each offeror's program eligibility.



Proposals must be received by david.shaw@faa.gov no later than 5:00 p.m. CST, October 21, 2016. Emailed proposals shall be sent to david.shaw@faa.gov and must contain DTFAAC-16-R-06033 as part of the email subject line.



Any responses received after 5:00 p.m. CST, October 21, 2016, may not be considered in accordance with AMS provision 3.2.2.3-14, Late Submissions, Modifications, and Withdrawals of Submittals, incorporated by reference in the solicitation. If all requested information is not furnished, the vendor's response may be determined ineligible.



As the FAA does not utilize sealed bidding contracting techniques, a public bid opening will not be held.



Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the SIR process.



This SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of proposals.



Inquiries regarding this SIR/RFO should be directed to the Contracting Specialist, David Shaw, david.shaw@faa.gov



If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/25806 to view the original announcement.

Update #2 ·

The Federal Aviation Administration (FAA) has a requirement for ELECTRICAL WORK and REPAVE PARKING LOT & ENTRANCE DRIVE at an FAA facility near Broadview Heights, OH. The Contractor shall provide all labor, materials (unless noted otherwise in the contract documents), and specialized equipment as necessary to perform the work described in the Statement of Work.



It is anticipated that a firm-fixed-price type construction contract will be awarded as a result of this solicitation.



Site visit instructions can be found in (Section L, 3.2.2.3-63 Site Visit (Construction), pg 37.



ALL QUESTIONS REGARDING THE PROJECT/SPECIFICATIONS/PLANS MUST BE RECEIVED IN WRITING (DAVID.SHAW@FAA.GOV) NO LATER THAN 5:00 P.M. CST ON OCTOBER 12, 2016, TO ALLOW FOR RESPONSES TO BE PROVIDED PRIOR TO DUE DATE FOR RECEIPT OF PROPOSALS.



Contractors must be registered with the System for Award Management, www.sam.gov on the date established for receipt of offers (October 21, 2016). Reference AMS Clause 3.3.1-33, paragraph (d), “if the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered Offeror.â€



In addition, offerors must complete and return the attached Business Declaration Form. The form is provided as a separate document under this announcement. The FAA reserves the right to review and verify each offeror's program eligibility.



Proposals must be received by david.shaw@faa.gov no later than 5:00 p.m. CST, October 21, 2016. Emailed proposals shall be sent to david.shaw@faa.gov and must contain DTFAAC-16-R-06033 as part of the email subject line.



Any responses received after 5:00 p.m. CST, October 21, 2016, may not be considered in accordance with AMS provision 3.2.2.3-14, Late Submissions, Modifications, and Withdrawals of Submittals, incorporated by reference in the solicitation. If all requested information is not furnished, the vendor's response may be determined ineligible.



As the FAA does not utilize sealed bidding contracting techniques, a public bid opening will not be held.



Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the SIR process.



This SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of proposals.



Inquiries regarding this SIR/RFO should be directed to the Contracting Specialist, David Shaw, david.shaw@faa.gov







If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/25736 to view the original announcement.

Update #1 ·

The Federal Aviation Administration (FAA) has a requirement for ELECTRICAL WORK and REPAVE PARKING LOT & ENTRANCE DRIVE at an FAA facility near Broadview Heights, OH. The Contractor shall provide all labor, materials (unless noted otherwise in the contract documents), and specialized equipment as necessary to perform the work described in the Statement of Work.



It is anticipated that a firm-fixed-price type construction contract will be awarded as a result of this solicitation.



Site visit instructions can be found in (Section L, 3.2.2.3-63 Site Visit (Construction), pg 37.



ALL QUESTIONS REGARDING THE PROJECT/SPECIFICATIONS/PLANS MUST BE RECEIVED IN WRITING (DAVID.SHAW@FAA.GOV) NO LATER THAN 5:00 P.M. CST ON OCTOBER 12, 2016, TO ALLOW FOR RESPONSES TO BE PROVIDED PRIOR TO DUE DATE FOR RECEIPT OF PROPOSALS.



Contractors must be registered with the System for Award Management, www.sam.gov on the date established for receipt of offers (October 21, 2016). Reference AMS Clause 3.3.1-33, paragraph (d), “if the offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer may proceed to award to the next otherwise successful registered Offeror.â€



In addition, offerors must complete and return the attached Business Declaration Form. The form is provided as a separate document under this announcement. The FAA reserves the right to review and verify each offeror's program eligibility.



Proposals must be received by david.shaw@faa.gov no later than 5:00 p.m. CST, October 21, 2016. Emailed proposals shall be sent to david.shaw@faa.gov and must contain DTFAAC-16-R-06033 as part of the email subject line.



Any responses received after 5:00 p.m. CST, October 21, 2016, may not be considered in accordance with AMS provision 3.2.2.3-14, Late Submissions, Modifications, and Withdrawals of Submittals, incorporated by reference in the solicitation. If all requested information is not furnished, the vendor's response may be determined ineligible.



As the FAA does not utilize sealed bidding contracting techniques, a public bid opening will not be held.



Potential offerors should note that the FAA reserves the right to communicate with one or more offerors at any time during the SIR process.



This SIR/RFO is not to be construed as a contract or a commitment of any kind. The Government shall not be liable for payment of any costs attributed to the preparation and submission of proposals.



Inquiries regarding this SIR/RFO should be directed to the Contracting Specialist, David Shaw, david.shaw@faa.gov







If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/25646 to view the original announcement.

Files

File Type Posted
ARSR Drain Pave 1.pdf PDF
Lindsay Products Dwg SP050119-ST.pdf PDF
CLE ARSR Drain Pave 7.pdf PDF
A001.pdf PDF
CLE ARSR Drain Pave 6.pdf PDF
Site Layout Refernce.pdf PDF
Business Declaration Form OCT2013.doc DOC document
ARSR Drain Pave 4.pdf PDF
Attachment J.6 Past Performance Questionnaire.pdf PDF
DTFAAC-16-R-06033.docx DOCX document
ARSR Drain Pave 3.pdf PDF
Attachment J.7 Experience Information Form.pdf PDF
Contractor's Release.doc DOC document
WD OH160095 07-08-2016 OH95.pdf PDF
Lindsay Products Dwg SP090028.pdf PDF
ARSR Drain Pave 2.pdf PDF
ARSR Drain Pave 5.pdf PDF
Specification FAA-GL-2139.doc DOC document
qbd-d-arsr-e002.pdf PDF
AT T layout.pdf PDF
DTFAAC-16-R-06033.docx DOCX document
ARSR Drain Pave 3.pdf PDF
CLE ARSR Drain Pave 6.pdf PDF
ARSR Drain Pave 1.pdf PDF
Attachment J.6 Past Performance Questionnaire.pdf PDF
Specification FAA-GL-2139.doc DOC document
ARSR Drain Pave 2.pdf PDF
Business Declaration Form OCT2013.doc DOC document
Contractor's Release.doc DOC document
CLE ARSR Drain Pave 7.pdf PDF
Site Layout Refernce.pdf PDF
WD OH160095 07-08-2016 OH95.pdf PDF
Lindsay Products Dwg SP090028.pdf PDF
ARSR Drain Pave 4.pdf PDF
Attachment J.7 Experience Information Form.pdf PDF
AT T layout.pdf PDF
ARSR Drain Pave 5.pdf PDF
Lindsay Products Dwg SP050119-ST.pdf PDF
qbd-d-arsr-e002.pdf PDF
WD OH160095 07-08-2016 OH95.pdf PDF
Attachment J.6 Past Performance Questionnaire.pdf PDF
DTFAAC-16-R-06033.docx DOCX document
Contractor's Release.doc DOC document
Attachment J.7 Experience Information Form.pdf PDF
Site Layout Refernce.pdf PDF
Specification FAA-GL-2139.doc DOC document
Business Declaration Form OCT2013.doc DOC document
Show all 47

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors