Superior-lidgerwood-mundy corp parts

1. This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.
2. Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87, effective, 7 March 2016.
3. It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency.
4. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV.
5. All acquisitions expected to exceed $10k can also be found on SAM.GOV under the same solicitation/RFQ listed in the header.
6. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order.
7. The United States Coast Guard Surface Forces Logistics Centerhas a requirement for the following items:

Vendor shall provide:

VENDOR NAME:

VENDOR UEI:

ALL ITEMS LISTED IN THE BELOW PARTS LIST AND NO SUBSTITUTIONS WILL BE AUTHORIZED WITHOUT APPROVAL FROM USCG SFLC TECHNICAL EXPERTS.

NSN

PART #

NOMENCLATURE

QTY

U/I

PRICE

TOTAL

3950 01-598-3240

C2-423-0005

BAND ASSEMBLY,BRAKE

4

EA

3950 01-598-3151

B2-065-0012

CONNECTING ROD,BRAK

4

EA

5360 01-672-8829

P2-965-0024

SPRING,HELICAL,COMP

20

EA

3990 01-713-9550

C2-423-0007

BRAKE BAND ASSEMBLY

2

EA

5360 01-598-3504

P2-965-0022

SPRING,HELICAL,COMP

8

EA

3010 01-598-4817

A2-411-0004

ACTUATOR, ELECTRO-ME

2

EA

3010 01-598-4822

A2-411-0003

ACTUATOR, ELECTRO-ME

1

EA

5365 01-697-0743

P2-909-0047

BUSHING,SLEEVE

40

EA

3950 01-598-3259

411006-1-1-1

ACTUATOR,BRAKE

2

EA

If unable to meet required delivery date provide DD: ________

PRESERVATION, PACKAGING & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS OUTLINED IN PREPARATION FOR DELIVERY BELOW:

BRAKE ASSEMBLY

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A

BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG

CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG

CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF

BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED

IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD

SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MILSTD-

129R      

CONNECTING ROD, BRAKE

P/N: B2-065-0012

NSN: 01-598-3151

PACKAGING SPECS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD

10, USING WEATHER-RESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND

CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED

ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEATSEALING,

ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER,

AND OTHERS, ARE ACCEPTABLE.

MARKING IAW MIL-STD-129R.

END ITEM USE: NSC/ WMSL BOAT-HDLG STERN BOAT-RECOVERY SYSTEM WINCH BRAKE

SPRING, HELICAL, COMPRESSION

P/N: P2-965-0024

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING

WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN

BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 FIBERBOARD BOX.

BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG

CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF

BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. MARKING IAW

MIL-STD-129R

BRAKE ASSEMBLY

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A

BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG

CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG

CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF

BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED

IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD

SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX.

MARKING IAW MIL-STD-129R

SPRING, HELICAL, COMPRESSION

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING

WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED,

AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING.

OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE.

PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-

3464.

MARKING IAW MIL-STD-129R

WEIGHT: 6 LBS

DIMENTION: 2' X 2' X 2'

ACTUATOR, BRAKE RH;

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING,

ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND

OTHERS, ARE ACCEPTABLE.

END USE: USED ON USCGC 418 FT WMSL, SHIPS STERN BOAT LAUNCH SYSTEM CARRIAGE WINCH

ACTUATOR, BRAKE LH

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS

NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118

DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING,

ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND

OTHERS, ARE ACCEPTABLE.

END USE: USCGC WMSL 418' NSC - STERN BOAT LAUNCH SYSTEM CARRIAGE WINCH

BUSHING,SLEEVE

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING

WEATHERRESISTANT

PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN

BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 FIBERBOARD BOX.

BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG

CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF

BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464.MARKING IAW

MIL-STD-129R

ACTUATOR, BRAKE (MODIFIED, CENTERLINE WINCH)

INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A

BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG

CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG

CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE

OFBAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED

IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD

SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW

MILSTD-129R

☐Quality Assurance Q/A Inspection, if this block is checked, the contractor shall be responsible for notifying the Contracting Officer at least seven (07) calendar days prior to the contractor being ready for any Q/A inspections or testing as required.

Are you able to meet packaging requirements? Yes ___ No ____

** Total cost shall have delivery and any Freight charges to zip code 21226 included. **

** SHIPPING: FOB DESTINATION REQUIRED. **

SHIP TO:

               USCG SURFACE FORCES LOGISTICS CENTER

               2401 HAWKINS POINT ROAD

               RECEIVING ROOM- BUILDING 88

               BALTIMORE, MD 21226

Preparation For Delivery

All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88, Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment.

All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided.

Material shall be packed for shipment using Military Packaging, for examples in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations.

Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse.

All material shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped.

All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm.

Please make sure that any changes in Delivery Timeframes or tracking information get sent to Arlett.Maj@uscg.mil      

U.S. COAST GUARD APPROVED LABEL SHOULD HAVE THE FOLLOWING

• NATIONAL STOCK NUMBER (NSN)
• ITEM NAME
• PART NUMBER
• PURCHASE ORDER NUMBER
• THE WORDS “COAST GUARD SFLC MATERIAL” CONDITION (A)
• QUANTITY AND UNIT OF ISSUE (I.E) (1-EA)

Invoicing In IPP

It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.

All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, UEI & TINs number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON-PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).

To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: Arlett.Maj@uscg.mil