Award to provide, install, and maintain a 10GB wave service between bldg 61801, room 1024, 2133 cushing street, fort huachuca, AZ. , and bldg 5010, room 1, 5150 E. Ironwood street, davis monthan AFB, AZ.
Award Notice Posted
- Solicitation number
- HC101318QB129
- Agency
-
Defense Information Systems Agency
Department of Defense
- Awarded
- to GTT Global Telecom Government Services, LLC
- Set-aside
- No set-aside
Opportunity facts
- Contract number
- HC101319PA037 Federal contract award
- NAICS code
- 517311 Wired Telecommunications Carriers
- PSC
- Not on record
Notice details come from SAM.gov. Updated .
Notice text
9 versions
Update #9 · Latest ·
AWARD NOTICE. Awarded Vendors: GTT GLOBAL TELECOM GOVERNMENT SERVICES, LLC. Contract Award Dollar Amount: 195540.0. Contract Award Date: 2018-10-12.
Update #8 ·
MOD P0003 IS ISSUED TO REQUEST THAT VENDORS REVISE MAPS TO CLEARLY SHOW THE FOLLOWING:
- ACTUAL FIBER ROUTE IN MILES
- DIVERSITY/50 METER SEPARATION/ SHOW IN DIAGRAMS LOCATION OF DWDM SYSTEMS TO VERIFY THAT DIVERSITY IS PROVIDED.
- CLEARLY SHOW THE SERVICE WIRING CENTERS (SWC) BEING USED FOR ACCESS AND MORE DETAIL OF THE FIBER ROUTES TO SWC.
- SERVICE DATE WAS REVISED IN ACCORDANCE WITH PROCUREMENT ACQUISITION LEAD TIMES FOR THIS TYPE OF SERVICE AND MUST BE MET.
- NO LEAD TIMES BEYOND THE SERVICE DATE WILL BE ACCEPTED.
- MAPS/DIAGRAMS WITH INCOMPLETE/INCORRECT INFORMATION WILL BE DEEMED TECHNICALLY UNACCEPTABLE.
**********************************
THE PURPOSE OF AMEND 0002 IS TO:
1. EXTEND QUOTES DUE DATE TO 23 AUG 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD
TIMES TO 04 JAN 19 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE
ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD
(CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION.
ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS
WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND
SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR
SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE
END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM
TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE
INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS.
ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR
SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR
THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE
POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER
CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
***************************************
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME.
Update #7 ·
MOD P0003 IS ISSUED TO REQUEST THAT VENDORS REVISE MAPS TO CLEARLY SHOW THE FOLLOWING:
- ACTUAL FIBER ROUTE IN MILES
- DIVERSITY/50 METER SEPARATION/ SHOW IN DIAGRAMS LOCATION OF DWDM SYSTEMS TO VERIFY THAT DIVERSITY IS PROVIDED.
- CLEARLY SHOW THE SERVICE WIRING CENTERS (SWC) BEING USED FOR ACCESS AND MORE DETAIL OF THE FIBER ROUTES TO SWC.
- SERVICE DATE WAS REVISED IN ACCORDANCE WITH PROCUREMENT ACQUISITION LEAD TIMES FOR THIS TYPE OF SERVICE AND MUST BE MET.
- NO LEAD TIMES BEYOND THE SERVICE DATE WILL BE ACCEPTED.
- MAPS/DIAGRAMS WITH INCOMPLETE/INCORRECT INFORMATION WILL BE DEEMED TECHNICALLY UNACCEPTABLE.
**********************************
THE PURPOSE OF AMEND 0002 IS TO:
1. EXTEND QUOTES DUE DATE TO 23 AUG 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD
TIMES TO 04 JAN 19 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE
ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD
(CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION.
ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS
WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND
SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR
SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE
END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM
TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE
INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS.
ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR
SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR
THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE
POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER
CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
***************************************
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
Update #6 ·
THE PURPOSE OF AMEND 0002 IS TO:
1. EXTEND QUOTES DUE DATE TO 23 AUG 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD
TIMES TO 04 JAN 19 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE
ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD
(CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION.
ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS
WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND
SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR
SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE
END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM
TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE
INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS.
ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR
SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR
THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE
POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER
CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
***************************************
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME.
Update #5 ·
THE PURPOSE OF AMEND 0002 IS TO:
1. EXTEND QUOTES DUE DATE TO 23 AUG 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD
TIMES TO 04 JAN 19 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE
ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD
(CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION.
ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS
WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND
SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR
SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE
END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM
TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE
INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS.
ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR
SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR
THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE
POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER
CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
***************************************
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
Update #4 ·
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME.
Update #3 ·
THE PURPOSE OF AMEND 0001 IS TO:
1. EXTEND QUOTES DUE DATE TO 25 JULY 18
2. SERVICE DATE IS REVISED TO COMPLY WITH PROCUREMENT ACQUISITION LEAD TIMES TO 27 NOV 18 SIP. LEAD TIMES THAT GO BEYOND THE SERVICE DATE WILL NOT BE ACCEPTED.
3. MAPS/DRAWINGS ARE REQUIRED TO CLEARLY SHOW FIBER ROUTE MILES, RTD (CONTRACTORS SHALL MEET RTD OF 10 MILLISECONDS), AND 50 METER SEPARATION. ALL INFORMATION IN MAPS/DRAWINGS MUST BE ACCURATE. MAPS/DRAWINGS WITH INCORRECT INFORMATION WILL BE FOUND TECHNICALLY UNACCEPTABLE AND SUBMISSION EXCLUDED FROM AWARD.
4. THIS REQUIREMENT MUST BE DIVERSE WITH SOLICITATION HC101318QA949/TSR SG28MAR185778 AND MUST BE ENGINEERED AND PROVISIONED TOTALLY DIVERSE END TO END FROM THE GOVERNMENT SERVICE DELIVERY POINTS (SDP) FROM TSR SG28MAR185778; MEANING THE PHYSICAL PATHS ARE TOTALLY SEPARATE INCLUDING MAN HOLES, CONDUIT, CENTRAL OFFICE LOCATIONS, AND FIBER BUILDS. ADDITIONALLY AS A MINIMUM MUST HAVE 50 METERS PHYSICAL SEPARATION FROM TSR SG28MAR185778.
5. ALL VENDORS MUST ADDRESS ANY TESTING AND ACCEPTANCE REQUIREMENTS FOR THESE SERVICES.
6. NOTICE OF COMPLETION MUST BE COORDINATE WITH THE TESTING & ACCEPTANCE POC BEFORE SUBMITTING TO DITCO.
7. ALL VENDORS MUST VALIDATE QUOTES AS STILL IN EFFECT AND UNDER CONSIDERATION. NO EXTENSIONS WILL BE APPROVED.
ALL ELSE REMAINS THE SAME
Update #2 ·
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a request for quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. The provisions that apply to this acquisition are identified in the DITCO Basic Agreements and Section M of the attached document. The associated North American Industrial Classification System (NAICS) code for this procurement is 517311 with a small business size standard of 1500. All quoted prices shall be identified in CLIN 0001 and applicable SLINs 0001AA, 0001AB, etc. as applicable for monthly recurring charges and CLIN 0002 and applicable SLINs 0002AA, 0002AB, etc. as applicable for non-recurring charges. CLIN/SLINs shall include item descriptions, quantities and units of measure. The requested service date and acceptance criteria are outlined in the attached inquiry. The product and service code for this telecommunications requirement is D304. The selected company must comply with the following commercial item terms and conditions, which are incorporated herein by reference and as outlined in existing basic agreements: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications if there is no existing basic agreement; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the selected clauses in paragraph (b) in the existing basic agreement. Quotes are due 16 JULY 18, by 9:00AM (CST) at DITCO Scott AFB, IL 62225-5406 Point of Contact(s): SARA VOGELGESANG (618) 229-9704, SARA.A.VOGELGESANG.CIV@MAIL.MIL
.
Update #1 ·
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation is issued as a request for quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83. The provisions that apply to this acquisition are identified in the DITCO Basic Agreements and Section M of the attached document. The associated North American Industrial Classification System (NAICS) code for this procurement is 517311 with a small business size standard of 1500. All quoted prices shall be identified in CLIN 0001 and applicable SLINs 0001AA, 0001AB, etc. as applicable for monthly recurring charges and CLIN 0002 and applicable SLINs 0002AA, 0002AB, etc. as applicable for non-recurring charges. CLIN/SLINs shall include item descriptions, quantities and units of measure. The requested service date and acceptance criteria are outlined in the attached inquiry. The product and service code for this telecommunications requirement is D304. The selected company must comply with the following commercial item terms and conditions, which are incorporated herein by reference and as outlined in existing basic agreements: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications if there is no existing basic agreement; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the selected clauses in paragraph (b) in the existing basic agreement. Quotes are due 16 JULY 18, by 9:00AM (CST) at DITCO Scott AFB, IL 62225-5406 Point of Contact(s): SARA VOGELGESANG (618) 229-9704, SARA.A.VOGELGESANG.CIV@MAIL.MIL
Files
| File | Type | Posted |
|---|---|---|
| HC101318QB129-0003.v0.pdf | ||
| HC101318QB129-0002.v0.pdf | ||
| Vendor_Block_Sample_Version3.pptx | PPTX presentation | |
| HC101318QB129-0001.v0.pdf | ||
| Vendor_Sample_Maps_Version2.pdf | ||
| Vendor_Sample_Maps_Version2.pdf | ||
| HC101318QB129.v0.pdf | ||
| Vendor_Block_Sample_Version2.pdf |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity