Stryker Medium Caliber Weapon System
Closed Pre-Solicitation Posted
This opportunity was awarded. See the award notice from , or the latest solicitation from .
- Solicitation number
- W56HZV-19-R-0101
- Agency
-
TACOM Life Cycle Management Command
Army Materiel Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336992 Military Armored Vehicle, Tank, and Tank Component Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command TACOM Life Cycle Management Command seeks to integrate a Medium Caliber Weapon System using a XM813 30x173mm cannon onto Stryker Double-V Hull A1 vehicles through a potential future competitive solicitation. The pre-solicitation notice requests industry feedback on capabilities for weapon system production and combat vehicle integration by March 30, 2019 to inform acquisition planning. General Dynamics Land Systems is the Stryker prime contractor, and the government intends to obtain prospective requirements through a market survey prior to releasing a request for proposal with an anticipated award date unspecified.
There is no set-aside designated for this potential opportunity. Current Remote Weapon Stations on Stryker vehicles would be replaced fleetwide by the Medium Caliber Weapon System. General Dynamics Land Systems maintains the Stryker technical data package as the incumbent. The government files provide additional details on requirements for the weapon system and draft evaluation criteria to support selection of a qualified contractor able to integrate this new capability across the entire Stryker brigade combat vehicle fleet.
Notice text
10 versions
Update #10 · Latest ·
12 December 2019: An updated Classified Stryker MCWS System Performance Specification (Attachment 0036) is available for this effort. In order to receive a copy of Attachment 0036, Offerors shall provide proof of valid Industrial Facilities Security Clearance by contacting the PM SBCT Security Manager, Diane Mitchell, diane.m.mitchell.civ@mail.mil, with the Company Name, address, CAGE Code, Facility CAGE Code as per the NISPOM DoD 5220.22-M, the contact information for the Facility Security Officer (FSO), and basis of the need to know. Foreign respondents who are not partnered with a U.S. prime contractor must have their government send the request for this information on their behalf, via their U.S. based Embassy. Verification of foreign respondent's ability to access and store U.S. classified information is required prior to any classified information being sent.
Update #9 ·
12 November 2019 Update: Draft documents for Sections E, L, and M of the upcoming RFP, W56HZV-19-R-0101, have been uploaded. Please provide any questions or comments on the Stryker MCWS Comment Matrix to Justin Stoner at Justin.d.stoner.civ@mail.mil and the Points of Contact for this notice no later than 2 December 2019.
Update #8 ·
***Update***
30 October 2019 - The notice is amended to provide supplemental information, as referenced in the Q&A responses.
***Update***
16 October 2019 - As part of its Request for Proposal process, PMO SBCT and Army Contracting Command (ACC) Warren will host a Stryker MCWS Industry Day on 19 November 2019 within the surrounding area of the Detroit Arsenal (DTA) in Warren, Michigan. The details of the Industry Day, as well as the required STA Form 17 (or 17-1 if applicable) have been provided as attachments to this notice.
***Update***
16 October 2019 - The notice is amended to include the Government's responses to the most recent round of questions received from industry.
ATTENTION INTERESTED VENDORS - Please note, if you have submitted an access request, but have not received a response within 24 hours, please email the points of contact listed.
***Update***
4 October 2019- A full Draft RFP will not be issued for this acquisition; instead, the Government will release sections of the RFP incrementally, until the final RFP is released in January 2020. The Draft Section C. Scope of Work for RFP W56HZV-19-R-0101 has been uploaded for industry review and comment. Please use the Microsoft Excel "Stryker MCWS Comment Matrix" to submit questions and/or comments by 12:00 p.m. Eastern Standard Time on 25 October 2019 to jenna.n.mcginnis.civ@mail.mil and antonio.c.smith13.civ@mail.mil.
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
***Update*** The Chief of Staff of the Army made the decision to go forward with 30mm Program of Record for Stryker. Additional information will be forthcoming in the Phase 1 Request for Quote, W56HZV-19-Q-0082.
Update #7 ·
***Update***
16 October 2019 - As part of its Request for Proposal process, PMO SBCT and Army Contracting Command (ACC) Warren will host a Stryker MCWS Industry Day on 19 November 2019 within the surrounding area of the Detroit Arsenal (DTA) in Warren, Michigan. The details of the Industry Day, as well as the required STA Form 17 (or 17-1 if applicable) have been provided as attachments to this notice.
***Update***
16 October 2019 - The notice is amended to include the Government's responses to the most recent round of questions received from industry.
ATTENTION INTERESTED VENDORS - Please note, if you have submitted an access request, but have not received a response within 24 hours, please email the points of contact listed.
***Update***
4 October 2019- A full Draft RFP will not be issued for this acquisition; instead, the Government will release sections of the RFP incrementally, until the final RFP is released in January 2020. The Draft Section C. Scope of Work for RFP W56HZV-19-R-0101 has been uploaded for industry review and comment. Please use the Microsoft Excel "Stryker MCWS Comment Matrix" to submit questions and/or comments by 12:00 p.m. Eastern Standard Time on 25 October 2019 to jenna.n.mcginnis.civ@mail.mil and antonio.c.smith13.civ@mail.mil.
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
***Update*** The Chief of Staff of the Army made the decision to go forward with 30mm Program of Record for Stryker. Additional information will be forthcoming in the Phase 1 Request for Quote, W56HZV-19-Q-0082.
Update #6 ·
***Update***
16 October 2019 - The notice is amended to include the Government's responses to the most recent round of questions received from industry.
ATTENTION INTERESTED VENDORS - Please note, if you have submitted an access request, but have not received a response within 24 hours, please email the points of contact listed.
***Update***
4 October 2019- A full Draft RFP will not be issued for this acquisition; instead, the Government will release sections of the RFP incrementally, until the final RFP is released in January 2020. The Draft Section C. Scope of Work for RFP W56HZV-19-R-0101 has been uploaded for industry review and comment. Please use the Microsoft Excel "Stryker MCWS Comment Matrix" to submit questions and/or comments by 12:00 p.m. Eastern Standard Time on 25 October 2019 to jenna.n.mcginnis.civ@mail.mil and antonio.c.smith13.civ@mail.mil.
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
***Update*** The Chief of Staff of the Army made the decision to go forward with 30mm Program of Record for Stryker. Additional information will be forthcoming in the Phase 1 Request for Quote, W56HZV-19-Q-0082.
Update #5 ·
***Update***
4 October 2019- A full Draft RFP will not be issued for this acquisition; instead, the Government will release sections of the RFP incrementally, until the final RFP is released in January 2020. The Draft Section C. Scope of Work for RFP W56HZV-19-R-0101 has been uploaded for industry review and comment. Please use the Microsoft Excel "Stryker MCWS Comment Matrix" to submit questions and/or comments by 12:00 p.m. Eastern Standard Time on 25 October 2019 to jenna.n.mcginnis.civ@mail.mil and antonio.c.smith13.civ@mail.mil.
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
***Update*** The Chief of Staff of the Army made the decision to go forward with 30mm Program of Record for Stryker. Additional information will be forthcoming in the Phase 1 Request for Quote, W56HZV-19-Q-0082.
Update #4 ·
The Phase 1 RFQ, W56HZV-19-Q-0082 has been posted to FBO. The response date is 29 April 2019. The RFQ is available at the following link: https://www.fbo.gov/notices/7f0d1cb412c1d7ab04f9984e1868688b
Update #3 ·
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
***Update*** The Chief of Staff of the Army made the decision to go forward with 30mm Program of Record for Stryker. Additional information will be forthcoming in the Phase 1 Request for Quote, W56HZV-19-Q-0082.
Update #2 ·
Please do not submit any CLASSIFIED information via email.
Update #1 ·
The purpose of this RFI is for the United States Government (USG) to determine the industry capabilities to produce and integrate a MCWS using a XM813 (30x173mm cannon) onto a Stryker DVHA1. PMO SBCT produced a MCWS on a Flat Bottom Hull, as a replacement to the Remote Weapon Station (RWS) currently on the platform in support of an Operational Needs Statement (ONS). The USG is considering the pursuit of a potential future system to be integrated fleet wide on the DVHA1 chassis. General Dynamics Land Systems (GDLS) is currently the prime manufacturer of the Stryker DVHA1 and a complete systems-level Technical Data Package (TDP) is not available.
The MCWS program is pre-decisional. Any information received in response to this survey will be used by the USG to aid its current Stryker Acquisition Planning effort and a potential competitive Request for Proposal (RFP). Currently, the USG plans to obtain the prospective requirements identified within this survey from a source that has the ability or capability to meet the USG's requirements.
Files
| File | Type | Posted |
|---|---|---|
| STA_Form_17-1_FEB_18.pdf | ||
| Stryker_MCWS_Industry_Day_Rd_2_v4_FINAL.PDF | ||
| STA_Form_17_FEB_18.pdf | ||
| Stryker_MCWS_Market_Survey_RFI.docx | DOCX document | |
| Stryker_MCWS_Market_Survey_RFI.docx | DOCX document |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Stryker Medium Caliber Weapon System | Award Notice | |
| Stryker Medium Caliber Weapon System | Solicitation | |
| Stryker Medium Caliber Weapon System | Pre-Solicitation | |
| Industry Day- Stryker Medium Caliber Weapon System | Special Notice | |
| This notice | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Stryker Family of Vehicles Commercial Solutions Opening | Department of the Army | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity