Starrco Modular Building

NASA Shared Services Center seeks design, supply, and installation of a pre-engineered, non-load-bearing 30-by-30-foot modular office building at Stennis Space Center, Mississippi, with quotes due September 3, 2026 at 12 p.m. CT. This is a small business set-aside procurement (RFQ 80NSSC26941007Q).

Place of performance is Building 2204, Stennis Space Center, Kiln, Mississippi, with delivery FOB Destination. The modular office system must include five offices, conference area, breakroom with appliance counter, and two stairway exits. Wall panels require 3-inch insulated sandwich construction with half-inch vinyl-covered gypsum board and 2-inch expanded polystyrene insulation rated Class A flame spread. The building includes five 3-by-7-foot steel doors with tempered safety glass and ADA-compliant locks, four 4-by-3-foot fixed insulated windows, a 125-Amp circuit breaker box with eight spaces, five modular light switches, seventeen 2-by-4-foot LED flat panel light fixtures, twenty-six duplex receptacles, and two additional electrical circuits. Ceiling system requires approximately 900 square feet of suspended 2-by-4-foot acoustical grid ceiling. The structural steel mezzanine must be engineered to IBC 2024 standards with 125 PSF live load capacity, deck height of 10 feet 3 inches, and clear height below of 9 feet, featuring 6-by-6-inch structural steel columns, OSHA/IBC-compliant perimeter safety guardrails, and two code-compliant industrial stairways. HVAC must include adequate mini-split wall units; flooring should be standard with carpet preferred. Deliverables include engineered calculations and shop drawings. The contract is firm-fixed-price. Offerors must be registered at SAM.gov. Technical drawings beyond the required design sketch, sealed calculations, and past performance documentation are not mandated for quote submission. The prime contractor remains responsible for overall performance when utilizing subcontractors. Contractual and technical questions are due September 1, 2026 at 12 p.m. CT in writing; telephone questions are not accepted. NAICS code is 321992 (Prefabricated Wood Building Manufacturing); PSC is 7195 (Miscellaneous Furniture and Fixtures).