SPMYM227Q1186 metal plate
Open Solicitation Posted
- Solicitation number
- SPMYM227Q1186
- Agency
-
Land and Maritime
Defense Logistics Agency, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 331315 Aluminum Sheet, Plate, and Foil Manufacturing
- Place of performance
- Bremerton, Washington 98314, United States
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
Defense Logistics Agency Land and Maritime seeks quotes for 40 sheets of 5086-H116 aluminum alloy metal plate under a Total Small Business set-aside, with quotes due November 6, 2026 at 2:00 PM local time. The DLA Maritime Puget Sound Contracting Division issues the solicitation for commercial products on a firm fixed-price basis.
Place of performance is Bremerton, Washington, and delivery is requested by December 8, 2026 to Puget Sound Naval Shipyard (DoDAAC N4523A), FOB Destination. The sheets are 1/4 inch by 48 inches by 96 inches, conforming to ASTM B 209 and ASTM B928, with one Certificate of Compliance per DI-MISC-81356A attached in WAWF and accepted or rejected concurrent with shipment. Packaging must follow ASTM D3951 and MIL-STD-129: no paper dividers, a maximum shipment height of 9 inches including the pallet, and a pallet that fully supports the sheet's weight and length and moves by forklift from both long and short sides. Required compliance items include mill and country of origin identification, a mercury exclusion certification, Buy American provisions, destination inspection under QA Level 4 with 7-day cycles, and 10 years of supply chain traceability documentation retention. Contractor personnel need Defense Biometric Identification System (DBIDS) credentials for base access. The awardee must have a current NIST SP 800-171 assessment unless the items are COTS, which must be identified to the contracting officer during the solicitation period.
A signed, complete solicitation must be submitted by email or fax, with clause 52.204-24 boxes checked. The quote must include the manufacturer's name, address, country of manufacture, and part number, plus lead time or delivery date. Required insurance is a certificate showing $500,000 general liability coverage. Invoicing runs through WAWF with quarterly acceptance and receiving reports. Evaluation considers technical acceptability, price, and past performance drawn from the Supplier Performance Risk System (PPRS-SR), and award goes to the most advantageous offer. The NAICS code is 331315, Aluminum Sheet, Plate, and Foil Manufacturing, and the PSC is 9535.
Notice text
Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process.
FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL OR FAX. ENSURE YOU CHECK APPLICABLE BOXES IN CLAUSE 52.204-24 (2)(d) (1) and (2) AND THAT YOU HAVE COMPLETED ITEMS 1 THROUGH 10 NOTED BELOW.
THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV
ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.
To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)
**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period**
Please read the contract in its entirety.
If you are able to provide a quote be sure to provide the following information in the sections provided below:
- Page 1 BLK 17a. Provide Contractor's info and cage code.
- Page 1 - Read box 28 and sign boxes 30 a, b, and c.
- Section A. A1 – 1. Enter The Contractor's POC
- Section B. – Enter your Quote and any other info we should know.
- Please quote FOB Destination
- Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name__________, Address_______ and the Country of Manufacturing________ and part number_________.
- Section F. – Provide the Lead Time and/or Delivery Date.
- Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes
- Section K.- 52.212-3(b)-(p) Check the applicable boxes
- Return the signed and filled out solicitation with your quote by the due date listed.
FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.
EMAIL: donna.todd@dla.mil
PHONE: 385-591-1057
Files
| File | Type | Posted |
|---|---|---|
| SECTION J ATTACHMENTS.pdf | ||
| Solicitation - SPMYM227Q1186 METAL PLATE.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Sheet,metal | Defense Logistics Agency | No set-aside | |
| Sheet,metal | Construction and Equipment | No set-aside | |
| SHEET,METAL and 1 more item | Defense Logistics Agency | No set-aside | |
| Sheet,metal | Construction and Equipment | No set-aside | |
| Sheet,metal | Construction and Equipment | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity