SECTION J ATTACHMENTS.pdf

CONTRACT DATA REQUIREMENTS LIST Form Approved

(1 Data Item) OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding thus burden estimate or any other aspect of this collection o f information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget.

Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses.

Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP TM OTHER

MISC

X

D. SYSTEM|ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE

GROUP

CERTIFICATE OF COMPLIANCE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18. ESTIMATED

TOTAL PRICE

DI-MISC-81356A PER CONTRACT PURCHASING ACTIVITY

7. DD 250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST SUBMISSION 14. DISTRIBUTION

DD ONE/R SEE BLOCK 16 b. COPIES

8. APP CODE D 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBMISSION

a. ADDRESSEE DRAFT FINAL

N/A N/A N/A Reg Repr o

16. REMARKS N4523A 0 1 0

Block 9: Distribution Statement D. Distribution authorized to DoD and DoD contractors only.

Administration and operations only, effective 11/3/2026. Other U.S. requests shall be referred to COMNAVSEASYSCOM.

Block 12 - Certification/Data Report documentation shall be attached in the Wide Area Workflow (WAWF) e-Business Suite. Acceptance/Rejection of Certification/Data Report documentation will be accomplished with the corresponding material and will not be accomplished prior to shipment of material.

Document No.: 6307-7900

15. Total 0 1 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

/s/ B PARKER 11/3/2026 /s/ R. REED 11/3/2026

DD FORM 1423-1, JUN 90 (EG) Page 1 of 1 Pages

0002A A

METAL PLATE

A001

NSN: LLS054641 DOC: 6307-7900

Standard Specification for Aluminum and Aluminum -Alloy Sheet and Plate, ASTM-B-209, dated 1 August 2007

Quantity is in pieces

Alloy number from Table 1: 5086

Temper number from Table 2 and Table 3 is: H116

Finish for sheet in nonheat-treatable alloys: mill finish

Sheet: flat Dimensions thickness: ¼", width: 48", and length: 96"

Tensile property limits and dimensional tolerances for sizes not covered in Table 2 or Table 3 of this specification and in ANSI H35.2, respectively

Orders for material meeting the requirements of this specification shall include the following information when required by the purchaser:

Supply of one of the pairs of tempers, (H14 or H24) or (H34 or H24), is excluded

Heat treatment in accordance with practice B918 is not required

A Certification of Compliance that material is manufactured IAW ASTM-B-209 is required

Marking for identification is required

Practices B 660 applies yes; If yes, levels of preservation, packaging, and packing required.

Additional Data Requirements: QSLM/QSLD APPLIES

NO PAPER DIVIDERS.

ATTACH A COPY OF SPEC SHEET.

*** ATTACH A COPY OF PALLET DRAWING***

Shipping pallet needs to fully support the entire weight/length of the sheet and be able to be moved with a forklift from the long side as well as the short side of the material. See provided drawing for specs. ***MAX SHIPMENT

HEIGHT 9" INCLUDING THE PALLET. *** Extremely important that pallet be made in accordance with provided drawing.