Spherical Si-533 diced crystal analysers
Closed Solicitation Posted
- Solicitation number
- Req-352445
- Agency
- Office of Science Department of Energy
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 334513 Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables
- Place of performance
- Menlo Park, California 94025, United States
- Points of contact
-
- Bernadette Espiritu espiritu@slac.stanford.edu (650) 926-2838
Notice details come from SAM.gov. Updated .
About this opportunity
SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is seeking to procure Spherical Si-533 diced crystal analysers through a fixed-price commercial subcontract. The solicitation requires a U.S. domestic end item source with specific technical specifications, including a Si wafer of 100mm diameter with a (533) plane surface, thickness between 1.5 and 4mm, and diced at 1.65mm x 1.65mm intervals. The offeror must demonstrate extensive expertise in manufacturing these analyzers, providing scientific publications that show the analyzer's resolution is less than 60 meV in backscattering geometry. The evaluation will be conducted using the Lowest Price Technically Acceptable method, with proposals due by February 6, 2025. To be eligible, offerors must be registered in the System for Award Management (SAM) and properly mark any proprietary or confidential information.
The solicitation does not specify a set-aside designation and includes no mention of incumbent contractors or specific award values. The place of performance is located in West Menlo Park, California, with the procurement managed through the Department of Energy Office of Science. Payment terms are Net 30 days with FOB Destination Prepaid and Add freight terms. Attached documentation includes a Buy American Act Certification, Representations and Certifications Rider, and detailed Terms and Conditions for Fixed Price Commercial Supplies and Services. The contract falls under NAICS category 334513 for Instruments and Related Products Manufacturing, and PSC category AG11 for Energy R&D Services. Offerors must comply with various federal regulations and provide a comprehensive technical and pricing proposal to Bernadette Espiritu at SLAC.
Notice text
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions.
SLAC has a requirement for a U.S. domestic end item source of the following:
Spherical Si-533 diced crystal analysers
Criterion - Si wafer
Description - The analyser shall consist of a Si wafer of thickness between 1.5 and 4mm, and 100mm diameter. The surface shall be the (533) plane. The Silicon waver will be diced (to relieve stain) with a dicing index of 1.65mm x 1.65mm, with a dicing blade thickness of maximum 120micron
Criterion - Substrate
Description - The waver will be affixed (e.g. glued) to a glass substrate of 100mm diameter and thickness between 10mm and 20mm. This substrate will have a spherical curvature of 800mm-+3mm
Criterion - Expertise of offerer
Description - The offeror must possess extensive expertise in manufacturing such analyzers. They should provide evidence of scientific publications demonstrating instances where their analyzers have been utilized or reported, including details on the resolution. In backscattering geometry (e.g., approximately 2-theta between 185 and 189 degrees), the analyzer's resolution must be less than 60 meV.
Evaluation criteria - Based on the scientific publications provided
The award will be made based upon the attached Lowest Price Technically Acceptable method.
Marking of Proprietary/Confidential Information. Offerors shall properly mark and identify with a restrictive legend or information markings on pages of the proposal that contain Proprietary/confidential information.
For Offeror to be eligible for a subcontract award with the University and the U.S. Department of Energy (DOE), Offeror shall be registered with the System for Award Management (SAM). Entities may register at no cost directly at the SAM website: https://www.sam.gov.
The resulting purchase order shall be performed in accordance with SLAC National Accelerator Laboratory's Terms and Conditions for Fixed Price Commercial Supplies and Services dated August 2023.
NOTE: The following documents are attached in this solicitation.
- Buy American Act Certificate, dated 08/29/2023
- Reps and Certs Rider-September 2022
- Terms & Conditions for Fixed Price Commercial Supplies and Services, August 2023
Please provide quoted price, delivery, technical compliance statement and certification to the attention of Bernadette Espiritu, espiritu@slac.stanford.edu.
Payment Terms: Net 30 days
Freight terms: FOB Destination Prepaid and Add
Attachments
| File | Type | Posted |
|---|---|---|
| BAA_Certification.pdf | ||
| Reps and certs Rider - September 2022.pdf | ||
| E1-Fixed_Price_Commercial_Supplies_and_Services_Subcontract_Aug2023.pdf |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity