SOURCES SOUGHT: Fire Department Cascade System Purchase and Install

THIS POSTING IS FOR MARKET RESEARCH ONLY: THERE WILL BE NO CONTRACT AWARDED FROM THIS REQUEST FOR INFORMATION.

17th Contracting Squadron at Goodfellow AFB, TX is conducting market research to identify vendors capable of providing an All-in-One Cascade System with installation in accordance with the indicated salient characteristics and dimenstions below. This Request for Information (RFI) is for market research purposes only. Goodfellow AFB is seeking companies that can provide and install an all in one cascade system that will comply with the salient characteristics and dimenstions:

Dimenstions: 10.5' L x 39" W x 79" H

Salient Characteristics:

6,000 PSI, 18 CFM CHARGING RATE
15 H.P. THREE PHASE ELECTRIC MOTOR, (SPECIFY VOLTAGE UPON ORDER)
PLC CONTROLLER WITH MULTICOLOR HMI TOUCHPAD PANEL MOUNTED DISPLAY AND CARRIES FULL UL LISTING
FOUR BANK CASCADE CONTROL SYSTEM
EMERGENCY STOP SWITCH
INTEGRAL THREE POSITION, NFPA 1901 APPROVED FULL CONTAINMENT FILL STATION ACCOMMODATES SCBA OR SCUBA CYLINDERS
AUTOMATIC CONDENSATE DRAIN SYSTEM WITH COLLECTION RESERVOIR AND LEVEL INDICATOR
P-5 SECURUS ELECTRONIC FILTER MONITORING SYSTEM
COMPRESSOR HIGH TEMP AND LOW OIL PROTECTION SYSTEM
SOUND ATTENUATING ENCLOSURE WITH HINGED DOOR ACCESS
INSTALLED WITH THE OPTIONAL GAS TEK CO MONITOR WIRED FOR ALARM AND SHUTDOWN
FOUR (4) ASME CODE CYLINDERS INSTALLED IN AN INTEGRAL DESIGNED RACK IN REAR OF UNIT
100’ HOSE AND ENCLOSED HOSE REEL
FIRE EDITION PAINT SCHEME

Additional install of high-pressure tubing to SCBA maintenance room must be completed. This install may cause the tubing to run through additional rooms to reach desired SCBA maintenance room. This will include approximately 130’ of high-pressure Stainless-Steel tubing with MSA connection fitting ability.

All work must be done and comply with in accordance with current NFPA, OSH standards. All equipment purchased must meet current NFPA and OSHA requirements.

This Sources Sought is for planning purposes only and shall not be considered as an invitation for bid, request for quotation, request for proposal, or as an obligation on the part of the Government to acquire any products or services. The information provided may be used by the Air Force in developing its acquisition strategy and performance specifications. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response.

The purpose of this sources sought is assessment of vendor interest and will aid the Government in identifying potential vendors and their business classification.

The NAICS code determined appropriate for this acquisition is 333912 – Air and Gas Compressor Manufacturing. The Product Seervice Code 4310 - Compressors and Vacuum Pumps. The size standard associated with NAICS 333912 is 1,000 employees. Vendors responding to this announcement shall indicate their business size for NAICS 333912 and any socio-economic statuses. Please include your CAGE code.

All interested parties please respond with a written capability statement in accordance with the above information. Responses shall be emailed to Mr. Michael Haynes at michael.haynes.20@us.af.mil and 1st Lt Koen Weaver at koen.weaver.1@us.af.mil. Please submit responses by the closing of this RFI on 21 November 2024 at 12:00 PM (NOON) CST.

FOR MARKET RESEARCH ONLY: THERE WILL BE NO CONTRACT AWARDED FROM THIS REQUEST FOR INFORMATION.