Solicitation New Universal Grinder for Cometa Grinder Replacement
Closed Solicitation Posted
- Solicitation number
- W912NW-22-R-0009
- Agency
-
ACC Redstone
Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
- Place of performance
- Corpus Christi, Texas 78419, United States
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks a new universal grinding machine to replace an aging Cometa grinder within the Corpus Christi Army Depot machine shop. The Department of the Army Materiel Command Contracting Command at Redstone Arsenal requires the machine be capable of grinding diameters from 4 to 13 inches and lengths up to 23 inches, and meet detailed technical requirements including spindle speeds up to 6,450 RPM and a Fanuc CNC control system. Offerors must submit proposals by September 16, 2022 and the selected contractor will be responsible for installation, training, and providing the necessary chucks and tooling for grinding T700 helicopter engine components.
There is no set-aside designation for this procurement. The primary NAICS code is 333514 and PSC code is 3405. No incumbent or current contractor is named. The place of performance will be Corpus Christi, Texas and the contractor must perform all necessary foundation and rigging work for installation. Amendments to the solicitation provided further clarification on temperature control requirements, rotor calibration, and the scope of contractor installation responsibilities.
Notice text
Background: The Cometa Grinder (Barcode X1384), located within CCAD’s Building 8 Machine Shop, was manufactured in 1986 and is 35 years old. The expected useful life of a grinding machine is approximately 15 years old. Due to the age of the Cometa, repairs will likely become more frequent, requiring longer down times and costing more due to reduced supply of replacement parts. Further, the Cometa Grinder is used to work T700 G.G. Rotors and is a primary backup for T700 Compressor Rotors. Thus a replacement machine is necessary to continue this capability in the CCAD machine shop.
Purpose: This Statement of Work (SOW) establishes the minimum requirements to procure and install a Universal Grinding Machine to replace the Cometa Grinder in the CCAD Machine Shop. The contractor shall show that the equipment has the salient characteristics required per paragraph 3.1 and 3.2. of this SOW by providing general equipment design drawings. After award of the contract and with deliver of the Grinding Machine, the contractor shall include these drawings with any updates per paragraph 3.4. The Contractor shall coordinate delivery date of parts and date of commissioning with the Government Technical Point of Contact and Contracting Officer.
See attached documents for all information relative to this procurement.
Files
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Sources Sought for New Universal Grinder for Cometa Grinder Replacement | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Deburring Machine | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity