Solicitation 57mm High Explosive-Point Detonating (HE-PD) Cartridge

The purpose of this Amendment is to extend the response date to 16 August 2018 by 4:00 pm. .

The purpose of this Amendment is to extend the response date to 16 August 2018 by 4:00 pm. 

AMENDMENT:
The Purpose of this Amendment is to:

• Update the Statement of Work (SOW) 3.1. General... The contractor shall deliver a configuration that has undergone and received USN approval for qualification in accordance with USN qualification requirements and standards to achieve Final Type Qualification (FTQ), Final Hazard Classification (FHC), and Full Operation Capability (FOC) of the cartridge per Naval Sea Systems Command Instruction (NAVSEAINST) 8020.5C and NAVSEAINST 8020.8C. Tests shall be conducted in accordance with NSWCDD MP-18/06, 57-mm HE-PD Cartridge Qualification Test Plan;

• Delete "The Offeror, if currently executing a qualification effort, shall not commence production in response to this solicitation prior to completion and approval of all qualification activities and finalization of the qualified design", from Section L: Volume II - Schedule; and

• Provide the statement, Section 6 of WS3805 is not binding and for information purposes only as stated. Section 6 of WS3805 - Notes "This section contains information of a general or explanatory nature that may be helpful, but is not mandatory".
See attached Amendment

.

AMENDMENT:

The Purpose of this Amendment is to:

• Update the Statement of Work (SOW) 3.1. General... The contractor shall deliver a configuration that has undergone and received USN approval for qualification in accordance with USN qualification requirements and standards to achieve Final Type Qualification (FTQ), Final Hazard Classification (FHC), and Full Operation Capability (FOC) of the cartridge per Naval Sea Systems Command Instruction (NAVSEAINST) 8020.5C and NAVSEAINST 8020.8C. Tests shall be conducted in accordance with NSWCDD MP-18/06, 57-mm HE-PD Cartridge Qualification Test Plan;

• Delete "The Offeror, if currently executing a qualification effort, shall not commence production in response to this solicitation prior to completion and approval of all qualification activities and finalization of the qualified design", from Section L: Volume II - Schedule; and

• Provide the statement, Section 6 of WS3805 is not binding and for information purposes only as stated. Section 6 of WS3805 - Notes "This section contains information of a general or explanatory nature that may be helpful, but is not mandatory".

See attached Amendment

Question from Industry with Answer:
Section 3.3.4.2 of WS 35805 states:

The projectile shall detonate on a target when impact velocity is greater than 285 m/s.

Section 4.4.4.6 of WS 35805 states:

The cartridge shall be fired at the target specified in 4.4.4.1 positioned at a minimum distance of 300 meters in front of the gun muzzle with an angle of impact of 90° ± 5. The projectile shall function upon impact with the target at a maximum velocity of 285 m/s.

What is the requirement:

·Impact velocity greater than 285 m/s?

or

·Impact velocity less than 285 m/s?

Answer:
The requirement is that the projectile shall properly function at any velocity greater than 285 m/s. The Verification Method for this requirement is such that the projectile will be tested at an impact velocity of 285 m/s or less in order to verify the minimum functional velocity requirement of any 285 m/s. Essentially verifying that the minimum function velocity of the projectile is 285 m/s or less.

.

Question from Industry with Answer:

Section 3.3.4.2 of WS 35805 states:

The projectile shall detonate on a target when impact velocity is greater than 285 m/s.

Section 4.4.4.6 of WS 35805 states:

The cartridge shall be fired at the target specified in 4.4.4.1 positioned at a minimum distance of 300 meters in front of the gun muzzle with an angle of impact of 90° ± 5. The projectile shall function upon impact with the target at a maximum velocity of 285 m/s.

What is the requirement:

·Impact velocity greater than 285 m/s?

or

·Impact velocity less than 285 m/s?

Answer:
The requirement is that the projectile shall properly function at any velocity greater than 285 m/s. The Verification Method for this requirement is such that the projectile will be tested at an impact velocity of 285 m/s or less in order to verify the minimum functional velocity requirement of any 285 m/s. Essentially verifying that the minimum function velocity of the projectile is 285 m/s or less.

Section F - Deliveries of Performance - is Corrected - CLIN 0002 720 dys ADC..

Section F - Deliveries of Performance - is Corrected - CLIN 0002 720 dys ADC.

Naval Surface Warfare Center, Indian Head Explosive Ordnance Technology Division (NSWC IHEODTD) has a requirement for the manufacture, assembly, test, and delivery of 57mm High Explosive - Point Detonating (HE-PD) Cartridges. The 57mm HE-PD Cartridge is a 57mm/70, electrically-primed cartridge designed to function in the 57mm MK 110 Gun Mount (GM). The MK 110 GM is employed on the U.S. Navy (USN) Littoral Combat Ship (LCS) class and the U.S. Coast Guard Legend-class (WMSL) National Security Cutters. 57mm HE-PD Cartridges are intended for combating surface and ground targets. The cartridge consists of a high explosive projectile with the ability to point detonate, a brass cartridge case loaded with propellant charge, and an electric primer. The requirement is solicited on an unrestricted basis inviting full and open competition. Government First Article Testing will be required. This solicitation is for non-commercial services. The NAICS code is 325920. The Size Standard is 750 employees. The FSC code is 1310. The requirement was previously synopsized under presolicitation notice number N00174-18-R-0031, on April 19, 2018. The solicitation number is N00174-18-R-0031 and is issued as a request for proposal (RFP). All responsible sources may submit a proposal, which shall be considered by the agency.
The Government intends to make a single award for a single-year, firm-fixed price contract as a result of this solicitation, to the responsible Offeror whose submission, which comply with the instructions and conform to the solicitation, will be the most advantageous BEST VALUE to the Government. Best Value will be determined based on an integrated assessment of the Qualitative Evaluation Factors and Sub-Factors and tradeoff process procedures. The following factors shall be used to evaluate the offers: (Factor 1) Technical; (Factor 2) Schedule; (Factor 3) Price; and (Factor 4) Past Performance. The Technical Factor 1 includes four Sub-Factors: (Sub-Factor 1) Production/Manufacturing; (Sub-Factor 2) Quality Assurance; (Sub-Factor 3) Testing Facilities and Capabilities; and (Sub-Factor 4) Management. The factors are listed in descending order of importance. All non-cost factors, when combined, are more important than cost; however, cost becomes the deciding factor of importance when Offerors receive similar ratings for the other factors. Factors 1, 2, and 4 will be used for a tradeoff process. Factor 3 will be pass/fail only. The Government intends to award the contract without holding discussions, but reserves the right to hold discussions at the Government's discretion if deemed necessary to obtain the best value for the Government.
The Request for Proposal (RFP) is being posted to the Federal Business Opportunities website at http://fbo.gov. THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. Paper copies of the solicitation, amendments, drawings and maps will not be provided. IT IS THE CONTRACTOR'S RESPONSIBILITY TO CHECK THE WEBSITE DAILY FOR ANY AMENDMENTS AND OTHER INFORMATION PERTAINING TO THIS SOLICITATION.
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. Failure to register in SAM makes an offeror ineligible for award of DoD contracts.
Any resultant contract will be DO Rated under the Defense Priorities and Allocations system (DPAS).
This procurement includes drawings or technical documents assigned a restricted distribution statement and an export control warning. To receive the controlled technical data, an Offeror must be currently certified through the United States/Canada Joint Certification Program.
To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx
Offerors are encouraged to apply for certification as early as possible in order for processing to be completed in sufficient time to prepare a proposal before solicitation closing. DoD Directive 5230.25.
The deadline to respond to this solicitation is 4:00 pm, 9 August 2018.
All technical/contractual questions must be submitted in writing to the Contract Specialist: Robert.g.cook2@navy.mil. In the email, please clearly indicate your company name, section and paragraph number of the RFP or specification as applicable. The Contract Specialist must receive any and all questions concerning the RFP no later than 5 business days before the response date of this solicitation. No questions will be accepted after the close of the solicitation. The mailing address is attention of Robert Cook, Code 022RC at NSWC Indian Head Explosive Ordnance Disposal Technology Division, Building 841, Code 022RC, Indian Head, MD 20640..

Naval Surface Warfare Center, Indian Head Explosive Ordnance Technology Division (NSWC IHEODTD) has a requirement for the manufacture, assembly, test, and delivery of 57mm High Explosive - Point Detonating (HE-PD) Cartridges. The 57mm HE-PD Cartridge is a 57mm/70, electrically-primed cartridge designed to function in the 57mm MK 110 Gun Mount (GM). The MK 110 GM is employed on the U.S. Navy (USN) Littoral Combat Ship (LCS) class and the U.S. Coast Guard Legend-class (WMSL) National Security Cutters. 57mm HE-PD Cartridges are intended for combating surface and ground targets. The cartridge consists of a high explosive projectile with the ability to point detonate, a brass cartridge case loaded with propellant charge, and an electric primer. The requirement is solicited on an unrestricted basis inviting full and open competition. Government First Article Testing will be required. This solicitation is for non-commercial services. The NAICS code is 325920. The Size Standard is 750 employees. The FSC code is 1310. The requirement was previously synopsized under presolicitation notice number N00174-18-R-0031, on April 19, 2018. The solicitation number is N00174-18-R-0031 and is issued as a request for proposal (RFP). All responsible sources may submit a proposal, which shall be considered by the agency.

The Government intends to make a single award for a single-year, firm-fixed price contract as a result of this solicitation, to the responsible Offeror whose submission, which comply with the instructions and conform to the solicitation, will be the most advantageous BEST VALUE to the Government. Best Value will be determined based on an integrated assessment of the Qualitative Evaluation Factors and Sub-Factors and tradeoff process procedures. The following factors shall be used to evaluate the offers: (Factor 1) Technical; (Factor 2) Schedule; (Factor 3) Price; and (Factor 4) Past Performance. The Technical Factor 1 includes four Sub-Factors: (Sub-Factor 1) Production/Manufacturing; (Sub-Factor 2) Quality Assurance; (Sub-Factor 3) Testing Facilities and Capabilities; and (Sub-Factor 4) Management. The factors are listed in descending order of importance. All non-cost factors, when combined, are more important than cost; however, cost becomes the deciding factor of importance when Offerors receive similar ratings for the other factors. Factors 1, 2, and 4 will be used for a tradeoff process. Factor 3 will be pass/fail only. The Government intends to award the contract without holding discussions, but reserves the right to hold discussions at the Government's discretion if deemed necessary to obtain the best value for the Government.

The Request for Proposal (RFP) is being posted to the Federal Business Opportunities website at http://fbo.gov. THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. Paper copies of the solicitation, amendments, drawings and maps will not be provided. IT IS THE CONTRACTOR'S RESPONSIBILITY TO CHECK THE WEBSITE DAILY FOR ANY AMENDMENTS AND OTHER INFORMATION PERTAINING TO THIS SOLICITATION.

Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. Failure to register in SAM makes an offeror ineligible for award of DoD contracts.

Any resultant contract will be DO Rated under the Defense Priorities and Allocations system (DPAS).

This procurement includes drawings or technical documents assigned a restricted distribution statement and an export control warning. To receive the controlled technical data, an Offeror must be currently certified through the United States/Canada Joint Certification Program.

To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx

Offerors are encouraged to apply for certification as early as possible in order for processing to be completed in sufficient time to prepare a proposal before solicitation closing. DoD Directive 5230.25.

The deadline to respond to this solicitation is 4:00 pm, 9 August 2018.

All technical/contractual questions must be submitted in writing to the Contract Specialist: Robert.g.cook2@navy.mil. In the email, please clearly indicate your company name, section and paragraph number of the RFP or specification as applicable. The Contract Specialist must receive any and all questions concerning the RFP no later than 5 business days before the response date of this solicitation. No questions will be accepted after the close of the solicitation. The mailing address is attention of Robert Cook, Code 022RC at NSWC Indian Head Explosive Ordnance Disposal Technology Division, Building 841, Code 022RC, Indian Head, MD 20640.

Naval Surface Warfare Center, Indian Head Explosive Ordnance Technology Division (NSWC IHEODTD) has a requirement for the manufacture, assembly, test, and delivery of 57mm High Explosive - Point Detonating (HE-PD) Cartridges. The 57mm HE-PD Cartridge is a 57mm/70, electrically-primed cartridge designed to function in the 57mm MK 110 Gun Mount (GM). The MK 110 GM is employed on the U.S. Navy (USN) Littoral Combat Ship (LCS) class and the U.S. Coast Guard Legend-class (WMSL) National Security Cutters. 57mm HE-PD Cartridges are intended for combating surface and ground targets. The cartridge consists of a high explosive projectile with the ability to point detonate, a brass cartridge case loaded with propellant charge, and an electric primer. The requirement is solicited on an unrestricted basis inviting full and open competition. Government First Article Testing will be required. This solicitation is for non-commercial services. The NAICS code is 325920. The Size Standard is 750 employees. The FSC code is 1310. The requirement was previously synopsized under presolicitation notice number N00174-18-R-0031, on April 19, 2018. The solicitation number is N00174-18-R-0031 and is issued as a request for proposal (RFP). All responsible sources may submit a proposal, which shall be considered by the agency.
The Government intends to make a single award for a single-year, firm-fixed price contract as a result of this solicitation, to the responsible Offeror whose submission, which comply with the instructions and conform to the solicitation, will be the most advantageous BEST VALUE to the Government. Best Value will be determined based on an integrated assessment of the Qualitative Evaluation Factors and Sub-Factors and tradeoff process procedures. The following factors shall be used to evaluate the offers: (Factor 1) Technical; (Factor 2) Schedule; (Factor 3) Price; and (Factor 4) Past Performance. The Technical Factor 1 includes four Sub-Factors: (Sub-Factor 1) Production/Manufacturing; (Sub-Factor 2) Quality Assurance; (Sub-Factor 3) Testing Facilities and Capabilities; and (Sub-Factor 4) Management. The factors are listed in descending order of importance. All non-cost factors, when combined, are more important than cost; however, cost becomes the deciding factor of importance when Offerors receive similar ratings for the other factors. Factors 1, 2, and 4 will be used for a tradeoff process. Factor 3 will be pass/fail only. The Government intends to award the contract without holding discussions, but reserves the right to hold discussions at the Government's discretion if deemed necessary to obtain the best value for the Government.
The Request for Proposal (RFP) is being posted to the Federal Business Opportunities website at http://fbo.gov. THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. Paper copies of the solicitation, amendments, drawings and maps will not be provided. IT IS THE CONTRACTOR'S RESPONSIBILITY TO CHECK THE WEBSITE DAILY FOR ANY AMENDMENTS AND OTHER INFORMATION PERTAINING TO THIS SOLICITATION.
Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. Failure to register in SAM makes an offeror ineligible for award of DoD contracts.
Any resultant contract will be DO Rated under the Defense Priorities and Allocations system (DPAS).
This procurement includes drawings or technical documents assigned a restricted distribution statement and an export control warning. To receive the controlled technical data, an Offeror must be currently certified through the United States/Canada Joint Certification Program.
To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx
Offerors are encouraged to apply for certification as early as possible in order for processing to be completed in sufficient time to prepare a proposal before solicitation closing. DoD Directive 5230.25.
The deadline to respond to this solicitation is 4:00 pm, 12 June 2018.
All technical/contractual questions must be submitted in writing to the Contract Specialist: Robert.g.cook2@navy.mil. In the email, please clearly indicate your company name, section and paragraph number of the RFP or specification as applicable. The Contract Specialist must receive any and all questions concerning the RFP no later than 5 business days before the response date of this solicitation. No questions will be accepted after the close of the solicitation. The mailing address is attention of Robert Cook, Code 022RC at NSWC Indian Head Explosive Ordnance Disposal Technology Division, Building 841, Code 022RC, Indian Head, MD 20640..

Naval Surface Warfare Center, Indian Head Explosive Ordnance Technology Division (NSWC IHEODTD) has a requirement for the manufacture, assembly, test, and delivery of 57mm High Explosive - Point Detonating (HE-PD) Cartridges. The 57mm HE-PD Cartridge is a 57mm/70, electrically-primed cartridge designed to function in the 57mm MK 110 Gun Mount (GM). The MK 110 GM is employed on the U.S. Navy (USN) Littoral Combat Ship (LCS) class and the U.S. Coast Guard Legend-class (WMSL) National Security Cutters. 57mm HE-PD Cartridges are intended for combating surface and ground targets. The cartridge consists of a high explosive projectile with the ability to point detonate, a brass cartridge case loaded with propellant charge, and an electric primer. The requirement is solicited on an unrestricted basis inviting full and open competition. Government First Article Testing will be required. This solicitation is for non-commercial services. The NAICS code is 325920. The Size Standard is 750 employees. The FSC code is 1310. The requirement was previously synopsized under presolicitation notice number N00174-18-R-0031, on April 19, 2018. The solicitation number is N00174-18-R-0031 and is issued as a request for proposal (RFP). All responsible sources may submit a proposal, which shall be considered by the agency.

The Government intends to make a single award for a single-year, firm-fixed price contract as a result of this solicitation, to the responsible Offeror whose submission, which comply with the instructions and conform to the solicitation, will be the most advantageous BEST VALUE to the Government. Best Value will be determined based on an integrated assessment of the Qualitative Evaluation Factors and Sub-Factors and tradeoff process procedures. The following factors shall be used to evaluate the offers: (Factor 1) Technical; (Factor 2) Schedule; (Factor 3) Price; and (Factor 4) Past Performance. The Technical Factor 1 includes four Sub-Factors: (Sub-Factor 1) Production/Manufacturing; (Sub-Factor 2) Quality Assurance; (Sub-Factor 3) Testing Facilities and Capabilities; and (Sub-Factor 4) Management. The factors are listed in descending order of importance. All non-cost factors, when combined, are more important than cost; however, cost becomes the deciding factor of importance when Offerors receive similar ratings for the other factors. Factors 1, 2, and 4 will be used for a tradeoff process. Factor 3 will be pass/fail only. The Government intends to award the contract without holding discussions, but reserves the right to hold discussions at the Government's discretion if deemed necessary to obtain the best value for the Government.

The Request for Proposal (RFP) is being posted to the Federal Business Opportunities website at http://fbo.gov. THE SOLICITATION WILL BE AVAILABLE IN ELECTRONIC FORMAT ONLY. Paper copies of the solicitation, amendments, drawings and maps will not be provided. IT IS THE CONTRACTOR'S RESPONSIBILITY TO CHECK THE WEBSITE DAILY FOR ANY AMENDMENTS AND OTHER INFORMATION PERTAINING TO THIS SOLICITATION.

Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. Failure to register in SAM makes an offeror ineligible for award of DoD contracts.

Any resultant contract will be DO Rated under the Defense Priorities and Allocations system (DPAS).

This procurement includes drawings or technical documents assigned a restricted distribution statement and an export control warning. To receive the controlled technical data, an Offeror must be currently certified through the United States/Canada Joint Certification Program.

To become certified for receipt of the technical documents, a U.S. Offeror must submit a completed DD Form 2345 to the U.S./Canada Joint Certification Office. Additional information on the Joint Certification Program and a checklist for completion of the DD Form 2345 is available at the following website: http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP.aspx

Offerors are encouraged to apply for certification as early as possible in order for processing to be completed in sufficient time to prepare a proposal before solicitation closing. DoD Directive 5230.25.

The deadline to respond to this solicitation is 4:00 pm, 12 June 2018.

All technical/contractual questions must be submitted in writing to the Contract Specialist: Robert.g.cook2@navy.mil. In the email, please clearly indicate your company name, section and paragraph number of the RFP or specification as applicable. The Contract Specialist must receive any and all questions concerning the RFP no later than 5 business days before the response date of this solicitation. No questions will be accepted after the close of the solicitation. The mailing address is attention of Robert Cook, Code 022RC at NSWC Indian Head Explosive Ordnance Disposal Technology Division, Building 841, Code 022RC, Indian Head, MD 20640.