Slurry and Crack Seal IDIQ at Fort McCoy, WI Contract Award

4DEC13 Change: The tentative site visit for December 5, 2013 will be delayed until the solicitation is posted. Please see the solicitation for the new site visit time. The solicitation should be released in the next few weeks.


The Mission and Installation Contracting Command has a requirement for the Preparation of surface and apply slurry seal to all areas indicated on the delivery order documents. The Contractor shall furnish all labor, equipment, material, supplies, signage, traffic control, and other incidentals necessary to provide a Slurry Seal. Slurry Seal shall consist of a mixture of an approved emulsified asphalt, mineral aggregate, water, and specified additives, proportioned, mixed and uniformly spread over a properly prepared asphalt surface. The completed Slurry Seal shall leave a homogeneous mat, adhere firmly to the prepared surface, and have a skidresistant
surface texture throughout its service life.
The Contractor shall submit a site-specific safety plan and activity hazard analysis to the Contracting Officer and both shall be approved prior to any work commencing. All work, operations, and activities shall comply with all
appropriate OSHA and USACOE EM 385-1-1 regulations and standards pertaining to the type of work being performed. REMOVAL WORK: Remove all items indicated on the drawings and in the
specifications and dispose of off post at the Contractor's expense including but not limited to:
1. Removal work associated with patching.
NEW WORK: Perform the work under this contract including but not limited to:
1. Clean, route, and seal cracks in asphalt and concrete pavements.
2. Prepare roads, parking lots, and other pavements identified for Slurry Seal.
3. Perform shallow depth and/or full depth pavement patching at locations designated on the delivery order.
4. Install pavement marking, parking lot markings, and paint symbols.
REPAIR WORK: Contractor shall repair any damages caused by this construction, including but not limited to:
1. Repair any damaged existing construction or property.
2. Repair any landscaping including trees, shrubs, flowers, and grass.
3. Repair vehicle ruts. Level the ruts, place topsoil, and seed the disturbed areas according to the specifications.

The proposed procurement is offered as an unrestricted procurement under NAICS code 237310. This procurement will be solicited in accordance with Sealed Bidding in FAR Part 14. The IFB will be available electronically at http://www.fbo.gov on or about November 26, 2013 and will be due on or about December 30, 2013. A site visit is tenatatively set up for December 5, 2013 at 10:00 am. See solicitation for verification and further details. The magnitude of this project is between $500,000 and $1,000,000. For additional information, contact Contract Specialist, Melissa Larson at 608-388-4617 or by e-mailing requests to melissa.t.larson.civ@mail.mil. Parties interested in the solicitation should access the web page for issuance of the solicitation, associated documents, and solicitation amendments; contractors will not be directly notified of solicitation amendments.

The Mission and Installation Contracting Command has a requirement for the Preparation of surface and apply slurry seal to all areas indicated on the delivery order documents. The Contractor shall furnish all labor, equipment, material, supplies, signage, traffic control, and other incidentals necessary to provide a Slurry Seal. Slurry Seal shall consist of a mixture of an approved emulsified asphalt, mineral aggregate, water, and specified additives, proportioned, mixed and uniformly spread over a properly prepared asphalt surface. The completed Slurry Seal shall leave a homogeneous mat, adhere firmly to the prepared surface, and have a skidresistant
surface texture throughout its service life.
The Contractor shall submit a site-specific safety plan and activity hazard analysis to the Contracting Officer and both shall be approved prior to any work commencing. All work, operations, and activities shall comply with all
appropriate OSHA and USACOE EM 385-1-1 regulations and standards pertaining to the type of work being performed. REMOVAL WORK: Remove all items indicated on the drawings and in the
specifications and dispose of off post at the Contractor's expense including but not limited to:
1. Removal work associated with patching.
NEW WORK: Perform the work under this contract including but not limited to:
1. Clean, route, and seal cracks in asphalt and concrete pavements.
2. Prepare roads, parking lots, and other pavements identified for Slurry Seal.
3. Perform shallow depth and/or full depth pavement patching at locations designated on the delivery order.
4. Install pavement marking, parking lot markings, and paint symbols.
REPAIR WORK: Contractor shall repair any damages caused by this construction, including but not limited to:
1. Repair any damaged existing construction or property.
2. Repair any landscaping including trees, shrubs, flowers, and grass.
3. Repair vehicle ruts. Level the ruts, place topsoil, and seed the disturbed areas according to the specifications.

The proposed procurement is offered as an unrestricted procurement under NAICS code 237310. This procurement will be solicited in accordance with Sealed Bidding in FAR Part 14. The IFB will be available electronically at http://www.fbo.gov on or about November 26, 2013 and will be due on or about December 30, 2013. A site visit is tenatatively set up for December 5, 2013 at 10:00 am. See solicitation for verification and further details. The magnitude of this project is between $500,000 and $1,000,000. For additional information, contact Contract Specialist, Melissa Larson at 608-388-4617 or by e-mailing requests to melissa.t.larson.civ@mail.mil. Parties interested in the solicitation should access the web page for issuance of the solicitation, associated documents, and solicitation amendments; contractors will not be directly notified of solicitation amendments.