SKI boots
Closed Solicitation Posted
- Solicitation number
- W911S225U1039
- Agency
-
MICC Fort Drum
Mission and Installation Contracting Command, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 316210 Footwear Manufacturing
- PSC
- 8430 Footwear, Men's
- Place of performance
- 7465 Bad Toelz Road Fort Carson Colorado, 80913 80913
- Points of contact
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Army Materiel Command Mission and Installation Contracting Command Fort Drum is seeking to procure specialized alpine touring ski boots through three distinct product specifications. The solicitation requires delivery of Dynafit Pro Radical boots (48 pairs total), Scarpa Maestrale boots (16 pairs total), and Tecnica Zero G boots (16 pairs total), with each model having specific technical requirements including Grilamid construction materials, precise weight specifications ranging from 1280-1470 grams, cuff rotation capabilities of at least 60-65 degrees, and compatibility with standard alpine touring bindings and ISO 9523 standards. All boots must feature full release and lock systems for tour and ski modes, heat moldable inner liners, and specialized outsoles for varied terrain hiking. The solicitation was posted on June 30, 2025, with responses due by July 7, 2025, providing vendors with a tight seven-day window for proposal submission. The procurement falls under NAICS code 316210 for Footwear Manufacturing and PSC code 8430 for Men's Footwear.
This opportunity is designated as a Total Small Business set-aside, restricting participation to qualified small business entities. The contract requires delivery of 80 total pairs of ski boots across the three specified models, with sizes ranging from 26 to 32 and varying quantities per size based on anticipated demand patterns. No incumbent contractors or award values are specified in the solicitation notice. Performance will take place at Fort Carson, Colorado, located at 7465 Bad Toelz Rd, Fort Carson, CO 80913, indicating the boots are likely intended for military personnel stationed at this Army installation. The technical specifications suggest these are high-performance alpine touring boots designed for both uphill touring and downhill skiing applications, reflecting specialized military or training requirements.
Notice text
Dynafit Pro Radical The boot cuff, boot shell, and boot spoiler must be constructed with Grilamid. Total boot weight should be around 1400 grams with a cuff rotation of at least 60 degrees and a flex rating of 120. The boot should have an 11 degree forward lean and a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 103.5 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x2 SIZE 27 x10 SIZE 28 x11 SIZE 29 x10 SIZE 30 x8 SIZE 31 x4 SIZE 32 x3Scarpa Maestrale The boot shell must be constructed with Grilamid BIO with a carbon core. The boot cuff must be constructed of Pebax Rnew with a carbon core. Total boot weight should be around 1470 grams with a cuff rotation of at least 60 degrees and a flex rating of 125. The boot should have a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 102 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x1 SIZE 27 x4 SIZE 28 x3 SIZE 29 x3 SIZE 30 x2 SIZE 31 x2 SIZE 32 x1 Tecnica Zero G The boot shell must be constructed with Grilamid. The boot cuff must be constructed of Co-Injected Carbon. Total boot weight should be around 1280 grams with a cuff rotation of at least 65 degrees and a flex rating of 130. The boot should have a 14 degree forward lean and a full release and lock system to enable uphill travel in tour mode and downhill performance in ski mode. The boot should have a last width of approximately 99 mm. The boot must have an outsole developed for hiking in varied terrain along with a removable heat moldable inner liner. The boot must have standard alpine touring inserts on the toe and heel and be compatible with standard alpine touring bindings. The boot must also be ISO 9523 compatible. SIZE 26 x1 SIZE 27 x4 SIZE 28 x3 SIZE 29 x3 SIZE 30 x2 SIZE 31 x2 SIZE 32 x1
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Air Force Temperate Weather Boot | Clothing and Textiles | Total Small Business | |
| Industrial Sewing Machines | MICC Fort Drum | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity