Screw Type Air Compressor
Closed Solicitation Posted
This opportunity was awarded. See the award notice from .
- Solicitation number
- W912ES25QA013
- Agency
- ENDIST St Paul US Army Corps of Engineers, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 333912 Air and Gas Compressor Manufacturing
- PSC
- 4310 Compressors And Vacuum Pumps
- Place of performance
- Fountain City, Wisconsin 54629, United States
- Points of contact
-
- Karl Just karl.p.just@usace.army.mil (651) 290-5768
- Kevin Henricks kevin.p.henricks@usace.army.mil (651) 290-5414
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Army Corps of Engineers Engineering District St. Paul is seeking to procure a screw type air compressor for its facility in Fountain City, Wisconsin. The solicitation requires a 30-40 horsepower, oil-injected rotary screw air compressor with variable speed drive, capable of operating efficiently in environments above 100 degrees Fahrenheit. Specific technical requirements include a minimum air pressure of 150 PSI, maximum air pressure of 175 PSI, 460 volts, 3-phase power, and an integrated refrigerant dryer with an external secondary air dryer. The compressor must be mounted on a 120-130 gallon horizontal air tank with dimensional constraints of maximum length 80", width 40", and height 75". Quotes are due by April 2, 2025, with the compressor to be delivered no later than April 18, 2025, and installation to be completed by USACE personnel.
The solicitation is set aside for small businesses, specifically targeting the Air and Gas Compressor Manufacturing (NAICS 333912) sector. While no specific incumbent contractor is mentioned, the procurement is for a single unit with a fixed delivery timeline. The compressor must meet precise technical specifications, including a required air flow of 32-36 CFM at 145 psi, an external Non-Cycling Refrigerated Air Dryer with a 39-degree Fahrenheit pressure dew point, and additional features such as a low oil shutoff, oil sight glass, and emergency shutdown button. The place of performance is located at 431 North Shore Drive in Fountain City, Wisconsin. Vendors must be registered in the System for Award Management (SAM) and prepared to provide detailed product specifications and country of origin certification.
Notice text
SUBJECT: Scope of Work/Technical Specifications
Goetz Air Compressor Replacement
1. General Information.
b. The quote will cover the new compressor, air dryer, and shipping to the below address. Installation of the new compressor will be done by USACE.
2. Specific Information.
Below are the requirements for the new screw type air compressor.
- The new air compressor will be of an oil injected rotary screw design with variable speed drive.
- Unit will run efficiently in an environment that typically is above 100 degrees Fahrenheit.
- Minimum Air Pressure of 150 PSI, Maximum Air Pressure of 175 PSI
- 460 volts, 3 Phase. 30-40 Horsepower.
- Belt driven screw drive.
- Integrated refrigerant dryer and filters.
- External secondary air dryer that will be connected on the tank outlet. Secondary air dryer can be shipped separately and will be installed by USACE.
- The screw drive air compressor will be mounted to a horizontal air tank. Air tank size shall be 120-130 gallons in size.
- The air tank will have a drain located towards the bottom of the tank to drain moisture when needed.
- Dimensions should fall in the following range. Maximum Length 80", Maximum Width 40", Maximum Height 75".
- Tank outlet, 1” NPT.
- Low oil shutoff to shut down the compressor when oil gets low. Oil tank will also have an oil sight glass.
- Emergency shutdown button located on the control panel.
Must be delivered no later than April 18, 2025.
3. Shipping Address
Plant and Facilities Manager
431 North Shore Drive
PO BOX 397
Fountain City, WI 54629
Attachments
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment W912ES25QA0130004 SF 30.pdf | ||
| Solicitation Amendment W912ES25QA0130003 SF 30.pdf | ||
| Solicitation Amendment W912ES25QA0130002 SF 30.pdf | ||
| Solicitation Amendment W912ES25QA0130001 SF 30.pdf | ||
| Solicitation - W912ES25QA013.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| Screw Type Air Compressor | Award Notice | |
| Screw Type Air Compressor | Solicitation |
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity