RFI - Mesh Knit Cloth Manufacturability

Open Pre-Solicitation Posted

Solicitation number
RFI-MeshKnitClothManufacturability
Agency
Responses due
Set-aside
No set-aside

Opportunity facts

NAICS code
313240 Knit Fabric Mills
PSC
8305 Textile Fabrics
Place of performance
Natick, Massachusetts 01760, United States

Notice details come from SAM.gov. Updated .

About this opportunity

The US Army DEVCOM Soldier Center is seeking industry sources, through a sources sought RFI posted under Army Contracting Command Aberdeen Proving Ground, to assess manufacturability of an updated mesh knit cloth, with responses due January 4, 2027 by 5pm EST. No set-aside is used. The cloth must conform to MC-PD-25-006, Rev 2, dated 19 November 2026, for USMC Cold Weather Baselayer end items conforming to MIL-DTL-32740 (Drawers, Mesh, CW Baselayer) and MIL-DTL-32741 (Undershirt, Mesh, CW Baselayer). The updates target increased stretch, weight, thickness, and aperture size to improve moisture transport, air permeability, and insulation, and a closer-fitting pattern follows if stretch is achieved. The Government seeks feedback on the ability to meet the specification before it applies the updates.

Per the specification, the cloth is Type 1 (modacrylic/rayon) in Class 1 (Coyote 498), a knotless Raschel warp-knit with 3.5-millimeter diamond apertures, weighing 3.75 to 4.25 ounces per square yard. It requires no-melt/no-drip performance, minimum bursting strength of 40 pounds, stretch of 35 percent (wales) and 60 percent (courses), and dimensional stability after three laundering cycles not exceeding 5 percent (wales) and 12 percent (courses). Verification uses first article and conformance inspection.

Responses must include company name, address, and point of contact, plus a three-yard sample at no cost to the Government with a material description covering fiber content, construction, and weight. For multiple samples, respondents note the pros and cons of each. The Government may issue a micro purchase request for additional yardage within 60 days after initial review for testing. Submit electronically to Trevor Scott (trevor.h.scott.civ@army.mil) and Jennifer Fernald (jennifer.l.fernald.civ@army.mil). The notice carries NAICS 313240 (Knit Fabric Mills) and PSC 8305 (Textile Fabrics).

Notice text

SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide a Mesh Knit Cloth conforming to MC-PD-25-006, Rev 2, dated 19 November 2026.

The Government requests that responses be submitted electronically to Trevor Scott, trevor.h.scott.civ@army.mil, and Jennifer Fernald, jennifer.l.fernald.civ@army.mil, by January 4th, 2027 by 5pm EST.

Background: The Government (DEVCOM Soldier Center) is interested in implementing potential updates to the current mesh knit cloth used in the USMC Cold Weather (CW) Baselayers conforming to MIL-DTL-32740, and MIL-DTL-32741. The purpose of this RFI is to gather industry feedback regarding the ability to meet the requirements listed in MC-PD-25-006, Rev 2, to ensure manufacturability prior to applying specification updates.

Description: Mesh knit cloth material updates include increased material stretch, weight, thickness, and aperture size. Specification changes are meant to enhance material performance by increasing moisture transport, air permeability, and insulation via micro air pockets. If increased material stretch is achieved, end item patterns will be modified to allow for a closer fitting garment resulting in improved fit and comfort.

Specific Specifications: Requesting industry’s feedback regarding the ability to meet the requirements listed in MC-PD-25-006, Rev 2, for potential use in end items conforming to MIL-DTL-32740 (Drawers, Mesh, CW Baselayer), and MIL-DTL-32741 (Undershirt, Mesh, CW Baselayer).

Deliverables:

  1. Company name, address, and point of contact information.
  2. Three (3) yard sample, at no cost to the government, with attached material description to include fiber content, construction and weight. If more than 1 sample is submitted, request that the pros / cons of each submission are noted. A micro purchase request for additional yardage may be requested within 60 days for testing purposes after initial review.
  3. Physical test data for each material sample submitted; test methods and requirement objectives are listed in Table I of MC-PD-25-006, Rev 2.
  4. Estimated price per yard with identification of full width.
  5. Verification that the fiber and material manufacturing are Berry Amendment compliant.
  6. Lead time for production: 0 – 15,000 yards; 15,000 – 30,000 yards; 30,000 – 45,000 yards.

If unable to meet all physical requirements, alternate samples will be accepted for review. In addition to the above deliverables, request documentation describing which physical requirements have not been met and any benefits provided by the deviation.  

Government Furnished Property (Equipment/Materials/Information/Computer Utilization): N/A

Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY

This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The Government has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned.

Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject.

RESPONSES:
Interested parties may identify their interest and capability by sending documentation regarding this requirement to DEVCOM Soldier Center via e-mail ONLY to Trevor Scott and Jennifer Fernald no later than January 4th, 2027 by 5:00 p.m. EST. Labeled material samples (see deliverable #2) may be shipped to:

US Army DEVCOM Soldier Center

15 General Green Ave, D-204

Natick, MA 01760

Attn: Trevor Scott

The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party.


Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number.

QUESTIONS:
Any questions for clarification may be emailed to Trevor Scott and Jennier Fernald prior to the response date. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.

Files

File Type Posted
MC-PD-25-006_REV2_19Nov2026.pdf PDF

Similar open opportunities

Opportunity Agency Set-aside Responses due
RFI - Novel or Multifunctional Fibers, Yarns, Coatings/Finishes and Fabrics for Soldier Protection and Comfort (MFFYF) Natick, Massachusetts 01760, United States · NAICS 313210 ACC Aberdeen Proving Ground No set-aside
Cloth, fiberglass NAICS 313210 Clothing and Textiles Total Small Business

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors