Responses to Questions 16 Feb 16 - FA6712-16-R-0002

Amendment #3

Amendment #2

The 911th Airlift Wing, Pittsburgh IAP ARS, Coraopolis, PA 15108 intends to issue a Request for Proposal (RFP), using the Best Value source selection procedure, Lowest Price Technically Acceptable (LPTA) techniques to make a single award. This is a firm fixed-price contract to provide for all labor, transportation, materials, tools, equipment and supervision necessary to Repair Small Arms Firing Range, Clinton, PA, Project DZAQ 15-0001A. Work includes, but not limited to,  providing all design, materials, labor, and equipment necessary to Repair Small Arms Range, Bldg 701 by modifying existing canopy and overhead baffles and supporting structure and installing new additional overhead baffles and supporting structure; abating lead dust, lead bullet fragments and lead containing surface coatings; removing rubber panels from the firing range floor; repairing concrete floor, replacing or refastening some existing rubber wall panels; installing additional ballistic rubber wall and ceiling panels, including acoustic panels; performing maintenance and repair to ventilation system; removing and reinstalling target retrieval system; adding ducts though the wall to connect portable heater hoses; and repairing the gutter system on the roof over the bullet trap area of the range. All work shall be accomplished in strict accordance with the contract documents. The estimated cost range is between $1,000,000 and $5,000,000. The NAICS code is 236220. The applicable size standard is $36.5 million. Request for Proposal FA6712-16-R-0002 will be available o/a 22 December 2015. Proposal closing date will be o/a 11 February 2016. This action is being set-aside for competition restricted to Service Disabled Veteran Owned Small Business firms IAW FAR Subpart 19.14 and 52.219-27. Performance period is 350 calendar days after receipt of Notice to Proceed. Notice to Offerors: Funds are not presently available for this project. No award will be made until funds are available to make payments under a contract. The government reserves the right to cancel this solicitation, either before or after the closing date with no obligation to the offeror by the government. Note: Interested offerors must be registered in the System for Award Management (SAM) database. Firms can register via the SAM Internet site at https://www.sam.gov/.  Interested offerors are required to submit their representations and certifications on-line using SAM. Offerors must be a certified SDVOSB firm at the time of the proposal closing date. The solicitation and associated plans and specifications will be available from the FBO website o/a 22 December 2015.

SITE VISIT HAS NOW BEEN RE-SCHEDULED. SITE VISIT HAS BEEN SCHEDULED FOR 28 JANUARY 2016 AT 11AM EST. 
PROPOSAL DUE DATE IS ALSO EXTENDED. PROPOSAL DUE DATE IS HEREBY CHANGED FROM 25 JANUARY 2016 AT 2PM TO 11 FEBRUARY 2016 AT 2PM.
AN AMENDMENT CANNOT BE WRITTEN AT THIS TIME DUE TO THE CONTRACT WRITING SYSTEM (PD2) BEING OFFLINE. AS SOON AS PD2 COMES ONLINE, AN AMENDMENT WILL BE WRITTEN.

SITE VISIT SCHEDULED FOR 12 JANUARY 2016 AT 1PM EST IS POSTPONED DUE TO WEATHER/ROAD CONDITIONS. A NEW SITE VISIT WILL BE SCHEDULED. AN AMENDMENT CANNOT BE WRITTEN AT THIS TIME DUE TO THE CONTRACT WRITING SYSTEM (PD2) BEING OFFLINE. AN AMENDMENT WILL BE ISSUED WITH A NEW SITE VISIT DATE.

The 911th Airlift Wing, Pittsburgh IAP ARS, Coraopolis, PA 15108 intends to issue a Request for Proposal (RFP), using the Best Value source selection procedure, Lowest Price Technically Acceptable (LPTA) techniques to make a single award. This is a firm fixed-price contract to provide for all labor, transportation, materials, tools, equipment and supervision necessary to Repair Small Arms Firing Range, Clinton, PA, Project DZAQ 15-0001A. Work includes, but not limited to,  providing all design, materials, labor, and equipment necessary to Repair Small Arms Range, Bldg 701 by modifying existing canopy and overhead baffles and supporting structure and installing new additional overhead baffles and supporting structure; abating lead dust, lead bullet fragments and lead containing surface coatings; removing rubber panels from the firing range floor; repairing concrete floor, replacing or refastening some existing rubber wall panels; installing additional ballistic rubber wall and ceiling panels, including acoustic panels; performing maintenance and repair to ventilation system; removing and reinstalling target retrieval system; adding ducts though the wall to connect portable heater hoses; and repairing the gutter system on the roof over the bullet trap area of the range. All work shall be accomplished in strict accordance with the contract documents. The estimated cost range is between $1,000,000 and $5,000,000. The NAICS code is 236220. The applicable size standard is $36.5 million. Request for Proposal FA6712-16-R-0002 will be available o/a 22 December 2015. Proposal closing date will be o/a 25 January 2016. This action is being set-aside for competition restricted to Service Disabled Veteran Owned Small Business firms IAW FAR Subpart 19.14 and 52.219-27. Performance period is 350 calendar days after receipt of Notice to Proceed. Notice to Offerors: Funds are not presently available for this project. No award will be made until funds are available to make payments under a contract. The government reserves the right to cancel this solicitation, either before or after the closing date with no obligation to the offeror by the government. Note: Interested offerors must be registered in the System for Award Management (SAM) database. Firms can register via the SAM Internet site at https://www.sam.gov/.  Interested offerors are required to submit their representations and certifications on-line using SAM. Offerors must be a certified SDVOSB firm at the time of the proposal closing date. The solicitation and associated plans and specifications will be available from the FBO website o/a 22 December 2015.

The 911th Airlift Wing, Pittsburgh IAP ARS, Coraopolis, PA 15108 intends to issue a Request for Proposal (RFP), using the Best Value source selection procedure, Lowest Price Technically Acceptable (LPTA) techniques to make a single award. This is a firm fixed-price contract to provide for all labor, transportation, materials, tools, equipment and supervision necessary to Repair Small Arms Firing Range, Clinton, PA, Project DZAQ 15-0001A. Work includes, but not limited to,  providing all design, materials, labor, and equipment necessary to Repair Small Arms Range, Bldg 701 by modifying existing canopy and overhead baffles and supporting structure and installing new additional overhead baffles and supporting structure; abating lead dust, lead bullet fragments and lead containing surface coatings; removing rubber panels from the firing range floor; repairing concrete floor, replacing or refastening some existing rubber wall panels; installing additional ballistic rubber wall and ceiling panels, including acoustic panels; performing maintenance and repair to ventilation system; removing and reinstalling target retrieval system; adding ducts though the wall to connect portable heater hoses; and repairing the gutter system on the roof over the bullet trap area of the range. All work shall be accomplished in strict accordance with the contract documents. The estimated cost range is between $1,000,000 and $5,000,000. The NAICS code is 236220. The applicable size standard is $36.5 million. Request for Proposal FA6712-16-R-0002 will be available o/a 29 December 2015. Proposal closing date will be o/a 29 January 2016. This action is being set-aside for competition restricted to Service Disabled Veteran Owned Small Business firms IAW FAR Subpart 19.14 and 52.219-27. Performance period is 350 calendar days after receipt of Notice to Proceed. Notice to Offerors: Funds are not presently available for this project. No award will be made until funds are available to make payments under a contract. The government reserves the right to cancel this solicitation, either before or after the closing date with no obligation to the offeror by the government. Note: Interested offerors must be registered in the System for Award Management (SAM) database. Firms can register via the SAM Internet site at https://www.sam.gov/.  Interested offerors are required to submit their representations and certifications on-line using SAM. Offerors must be a certified SDVOSB firm at the time of the proposal closing date. The solicitation and associated plans and specifications will be available from the FBO website o/a 29 December 2015.