Replacement Transformer and Shore Tie at CGC WYACONDA
Closed Solicitation Posted
- Solicitation number
- 70Z02926QNEWO0000006
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 238210 Electrical Contractors and Other Wiring Installation Contractors
- PSC
- Z1NZ Maintenance Of Other Utilities
- Place of performance
- Iowa 52001, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The United States Coast Guard, under the Department of Homeland Security, is seeking quotations from qualified electrical contractors to furnish labor, materials, equipment, and supervision for the installation of a three-phase buck/boost transformer and associated electrical infrastructure at USCG Cutter WYACONDA's shore-tie facility. The scope of work includes site assessment, transformer procurement, installation downstream of the utility metering point, comprehensive testing and commissioning, and final documentation. Contractors must comply with NFPA 70 (National Electrical Code), IEEE standards, MIL-STD-1399, and OSHA requirements, with a dedicated project manager available during business hours and 24-hour technical response capability. Award will be based on the lowest price technically acceptable quotation, with evaluation criteria encompassing price, technical acceptability, and past performance. The solicitation number is 70Z02926QNEWO000006, issued as a Request for Quotation with a submission deadline of February 16, 2026, with quotes directed to Daniel Galarza at Daniel.Galarza@uscg.mil.
This is a 100 percent small business set-aside under NAICS code 238210 with a small business size standard of $45,000,000, and all contractors must maintain active registration on SAM.gov. No incumbent contractor is identified in the solicitation documents. The contract will be awarded as a firm-fixed price construction contract subject to Davis-Bacon wage determination IA20260065 for Building Construction in Dubuque County, Iowa, with prevailing wage rates applied to applicable trades including electricians at $42.45 per hour plus $20.55 fringe benefits. Performance and payment bonds are required as part of contract execution. The work will be performed at USCG Cutter WYACONDA located in Dubuque, Iowa 52001, with no specific completion timeline provided in the available documents.
Notice text
This is a combined synopsis/solicitation for non-commercial items prepared in accordance with the format in FAR Part 36, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and no other written solicitation will not be issued.
Instructions to offerors, (FAR Part 36) evaluation criteria, and all applicable FAR Provisions and Clauses are attached.
The solicitation number is 70Z02926QNEWO000006 and is issued as a Request for Quotation (RFQ).
The solicitation document and incorporated provisions and clauses.
Federal Acquisition Regulation (FAR) Clauses and Department of Labor Wage Rates for Construction are included in this order and are applicable.
Where Federal Acquisition Regulation clause language is inconsistent with FAR Part 36,
Legal Effect of Quotations, that language is hereby tailored in accordance with FAR Part 36 to be consistent with a request for quotations.
This tailoring includes but is not limited to the following: In accordance with FAR Part 36, a quotation is not an offer, and any clause provision to the contrary is hereby modified to be consistent with FAR Part 36. Where the word "offer/offeror" or a derivative of that word appears, it is changed to "quote/quoter" or a derivative of that word.
This is a small business set aside, the applicable NAICS code is 238210 and PSC code is Z1NZ
This solicitation will result in a Firm-Fixed Price Construction Contract. Award will be based on the lowest price technically acceptable. The evaluation factors are:
- Price
- Technical Acceptability
- Past Performance
This is set aside 100% for small businesses.
Contractor must be ACTIVE on https://www.sam.gov
The United States Coast Guard is seeking quotations from qualified electrical contractors for Shore-Side electrical construction in support of USCG Cutter WYACONDA located in Dubuque IOWA. The scope of work includes furnishing all labor, materials, equipment, supervision, testing and documentation necessary to install a three-phase buck/boost transformer between the utility metering point and the shore tie receptacle. The contractor shall coordinate with the Coast Guard.
Please see the attached Statement of Work for specifications of work, illustrations and POC’s for setting up site visits.
60 DAY ARO
FOB Destination to:
USCGC WYCONDA
60 E 1ST DUBUQUE
IOWA 52001
Site Visit. Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.
The Government Point of Contacts (POC) for this work is:
CWO KERRY BUNYAN
Kerry.R.Bunyan@uscg.mil
(571) 613-1083
All work shall be coordinated through the POC.
All quotes are due at by 1:00pm CST on February 16, 2025. Submit quotes to the following e-mail address: Daniel.Galarza@uscg.mil, all questions regarding this solicitation and site visit shall be submitted to the COR email: Kerry.R.Bunyan@uscg.mil
Phone number: (571) 613-1083
Files
| File | Type | Posted |
|---|---|---|
| WAGE DETERMINATION.txt | TXT text file | |
| STATEMENT OF WORK.docx | DOCX document | |
| SF1442 (AutoRecovered).docx | DOCX document | |
| Construction Clauses (Mar) 2025.odt | ODT document |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Inspect and Repair of 13.2KV Main Switchgear | — | Total Small Business | |
| Open, Inspect, Report and Overhaul of Circuit Breakers | Coast Guard | Total Small Business | |
| Dike B Generator Installation, Mansfield Hollow Dam, Mansfield Center, CT | ENDIST New England | Total Small Business | |
| Transformer | Naval Supply Systems Command | No set-aside | |
| Circuit breakers | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity